Macro for bouncing without any processing from the main-outs

Post general topics related to Cubase 7 and Cubase Artist 7 here.

Macro for bouncing without any processing from the main-outs

Postby sonic74 » Fri Dec 06, 2013 12:18 am

Hi. I have made macros for bouncing the selected part without any processing from the main output. It's actually an updated version of a macro I had found on the internet a long time ago. I found myself using it a lot lately, so I had to share it.

There are two versions. The second version also mutes the part that's bounced. And that needs 3 project logical presets to be made.

To use it, firstly you must adjust the settings in your export window. Select main outs. "Import into project" and "Close after export" must be selected. Also give a name like "bounce" or anything, and click that arrow on the right, and select "auto update name". Actually, these are pretty basic settings.

Select the track and the part you want to bounce and fire the macro. 8-)

Here is the recipe :

Mixer - Bypass: Channel Strip on Main Mix
Mixer - Bypass: EQs on Main Mix
Mixer - Bypass: Inserts on Main Mix
Edit - Solo
Transport - Locators to Selection
File - Export Audio Mixdown
Audio Export - Sync Channel Selection with MixConsole
Audio Export - Increase Counter Start Value
Audio Export - Perform Audio Export
Navigate - Bottom
Edit - Deactivate All Solo States
Navigate - Up
Navigate - Bottom
Edit - Select None
Mixer - Bypass: Channel Strip on Main Mix
Mixer - Bypass: EQs on Main Mix
Mixer - Bypass: Inserts on Main Mix
Last edited by sonic74 on Wed Dec 11, 2013 2:58 pm, edited 4 times in total.
sonic74
Junior Member
 
Posts: 60
Joined: Sun Oct 13, 2013 4:34 pm
Has thanked: 35 times
Been thanked: 14 times

Re: Macro for bouncing without any processing from the main-

Postby sonic74 » Fri Dec 06, 2013 12:32 am

And the advanced (!) version which mutes the bounced part also :D

Make three presets with the Project Logical Editor. (Attached screenshots) Beware that the 3rd one, named "select_bounced" has the setting below "Function = Select".

(EDIT: The next message has the links to these presets)

Having made these, here is the recipe to the macro:

Process Project Logical Editor - rename_as_bounced
Mixer - Bypass: Channel Strip on Main Mix
Mixer - Bypass: EQs on Main Mix
Mixer - Bypass: Inserts on Main Mix
Edit - Solo
Transport - Locators to Selection
File - Export Audio Mixdown
Audio Export - Sync Channel Selection with MixConsole
Audio Export - Increase Counter Start Value
Audio Export - Perform Audio Export
Navigate - Bottom
Edit - Deactivate All Solo States
Navigate - Up
Navigate - Bottom
Edit - Select None
Mixer - Bypass: Channel Strip on Main Mix
Mixer - Bypass: EQs on Main Mix
Mixer - Bypass: Inserts on Main Mix
Process Project Logical Editor - select_bounced
Edit - Mute Events
Process Project Logical Editor - rename_bounced_as_x
Attachments
3.png
(26.01 KiB) Not downloaded yet
2.png
(28.02 KiB) Not downloaded yet
1.png
(25.26 KiB) Not downloaded yet
Last edited by sonic74 on Thu Jan 09, 2014 12:05 am, edited 2 times in total.
sonic74
Junior Member
 
Posts: 60
Joined: Sun Oct 13, 2013 4:34 pm
Has thanked: 35 times
Been thanked: 14 times

Project Logical Presets for the macro

Postby sonic74 » Fri Dec 06, 2013 12:46 am

Here is the link to the presets above :

https://dl.dropboxusercontent.com/u/161 ... _files.rar

You must extract to : (This is for windows. For mac, I have no idea.)
C:\Users\*****\AppData\Roaming\Steinberg\Cubase 7_64\Presets\Project Logical Editor
sonic74
Junior Member
 
Posts: 60
Joined: Sun Oct 13, 2013 4:34 pm
Has thanked: 35 times
Been thanked: 14 times

Re: Project Logical Presets for the macro

Postby Elektrobolt » Fri Dec 06, 2013 12:54 am

sonic74 wrote:Here is the link to the presets above :

https://dl.dropboxusercontent.com/u/161 ... _files.rar

You must extract to : (This is for windows. For mac, I have no idea.)
C:\Users\*****\AppData\Roaming\Steinberg\Cubase 7_64\Presets\Project Logical Editor

Just a bit of a nudge, but if you use the built-in zip utility in Windows, more people can use your macro right out of box, so to speak. (Right click File or Folder > "Send to" > "Compressed (zipped) folder".)

If the forum don't accept .ZIP files, just rename it to .PIZ (that usually works for me).

I cannot remember if this works in XP, but Windows 7 and 8 has it built right in. :)
With Note Expression (VST3.5), individual notes contain their own set of controller data when played polyphonically.
VST Expression, Steinberg VST
Cakewalk Sonar X3 now supports VST3!
User avatar
Elektrobolt
Senior Member
 
Posts: 1384
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Has thanked: 13 times
Been thanked: 61 times

Re: Macro for bouncing without any processing from the main-

Postby sonic74 » Fri Dec 06, 2013 12:56 am

sonic74
Junior Member
 
Posts: 60
Joined: Sun Oct 13, 2013 4:34 pm
Has thanked: 35 times
Been thanked: 14 times

Re: Macro for bouncing without any processing from the main-

Postby estrica2000 » Sun Jan 05, 2014 4:11 am

I did not suceed muting the selected event object with this recipe. I had to add a macro (with just mute object events) in one of the PLE Insctructions to make it suceed. Do you mind tellling me where is the instruction to mute the event? at least for me to learn a bit.

Thank you
estrica2000
Junior Member
 
Posts: 92
Joined: Sun Dec 01, 2013 5:55 pm
Has thanked: 4 times
Been thanked: 8 times

Re: Macro for bouncing without any processing from the main-

Postby sonic74 » Thu Jan 09, 2014 12:08 am

Thanks estrica2000. I edited that post to include the mute command. While typing the macro to the post, I skipped that part somehow. (And it's strange that for such a useful macro, you seem to be the only one that has tried it)
sonic74
Junior Member
 
Posts: 60
Joined: Sun Oct 13, 2013 4:34 pm
Has thanked: 35 times
Been thanked: 14 times


Return to General

Who is online

Users browsing this forum: No registered users and 10 guests