Strophoid wrote:If you already have multiple harddrives, try splitting your sample libraries across them to reduce the load on each disk.
You didn't specify your OS, but if you are on XP or older it might help to defragment your drive, that could help improve your read speeds a bit.
ThePresent wrote:If you are on W7, try disk repair. Maybe some bad sectors need to be taken care of. I suppose the drive is out of warranty? Nowadays many drives only get one year of warranty but maybe you still have 3?
JamesTNL wrote:Are you just getting disk spikes? Or does the disk cache meter creep up/remain overloaded? Does it affect playback, or is it just something you observed on the performance meter (F12)?
I ask this because Cubase's transport controls causes disk cache spikes and I don't think there's anything you can do about it.
If you have an (otherwise empty) project with just 1 audio track without even audiofiles loaded/recorded, the disk cache meter will briefly overload (and just as quickly disappear) when you press Play/Stop/ and all the other transport controls.
Actually the disk cache meter shows spikes & causes audio stutter (choppy audio/audio glitches) but it dont remain overloaded. This usually happens while working with remarkable amount of audio tracks. No issue with the VST tracks.
I have no problem with a single audio track but while working on a mix CD like below i have to work with 10/30 audio tracks & thats the time when disk overload occurs.
Thanks for taking your time helping me out
How much RAM have you got in your system?
I'm not sure exactly what Cubase means by 'disk cache' or how Cubase loads audiofiles and such when you open a project, but I'd assume Cubase tries to load as much as it can from your HDD into RAM and once your RAM is 'full' (as in: Cubase is unable to allocate anymore RAM for audio files), it'll have to page out existing data from RAM and load more data from (the much slower) HDD into RAM, which can't keep up with the project playing back, thus causing the disk spikes.
So another take on this could be insufficient RAM. Are you running 64-bit Cubase? Might be worth a shot if you aren't already, as Cubase 32-bit on a 64-bit OS still can only allocate max 4GB memory.
My workstation has 16GB RAM (you guys can see that in my studio gears description under my every single comment) & i'm using 64 bit Cubase. Not pretty sure but Disk Cache Meter depends on hard disk's data reading speed, so upgrading to SSD could fix this issue but its costly option as i told above. So any alternative if anyone know...
JamesTNL wrote:Hmm, yeah...16GB would seem enough to me. But you could check Windows Task Manager to see if it's maxing out RAM. If so, a RAM upgrade might do the trick. But it does seem it's most likely the HDD that's the bottleneck. But it's hard to say, as I don't know exactly how much data you have going on in the project and how Cubase handles this exactly.
I can't imagine getting an SSD for my audio HDD at this point, prices are still ridiculous!
Good luck anyways!
ThePresent wrote:Try the disk repair function of windows. It might take very long maybe even 24 hrs to complete. Either way things will get better or not, but if it is taking that long, it is likely that the HDD is the problem. The rest of your system specs are just fine. But a harddisk with lots of bad sectors, there is no cure for that, you should send the the drive back to your shop. Or install a spare one just to check it out.
I have had to send back a drive three times already because of spikes and audio stutter. Each time the shop returned me a refurbished one and the problem was gone (of course untill another one went bad )
Users browsing this forum: No registered users and 0 guests