Controlling VST instruments & effects with BCR2000

Virtual instruments Virtual Effects and Add-ons
2

  1. Ensure that you have installed the drivers correctly. Usually by plugging in the BCR and following the prompts gets the job done…not much different to installing a USB printer?

  2. Verify that you are using the 64-Bit USB MIDI Driver 1.0.10 when selecting a driver to install when prompted.

  3. Assuming this is all done - check the Devices Menu to see if the BCR appears.

The Generic Remote device page 493

Assignment via the Learn function within Cubase
Using the “QC Learn Mode” button on the Quick Controls tab in the Inspector, you can assign a parameter by moving the corresponding control:
~ Activate the “QC Learn Mode” button, select the slot to which you want to assign a parameter and use the desired control.
~ All automatable controls can be learned this way.