Not sure if this is the right place to mention this, but i’ve found another issue with CMC-TP and Cubase 7.
The slider, when in zoom mode, only seems to control the track editor – when i try to use it on other pages, such as the key editor and the mixer, it does nothing at all.
FWIW, I’ve still got my key commands set up for horizontal zooming in and out, and they work perfectly on all editors.
PS: I appreciate that Steinberg is on top of the known CMC issues – happy to see that the EQ functionality will be fixed on the QC.
Best bet, of course, is for things to be working as expected, but if that’s not possible, IMHO it’s much better to see the software maker being proactive about problem issues, rather than leaving users in the dark.
Again, QC no longer goes into “dark” mode when exiting Cubase. It goes to MIDI mode with all of the QC knobs powered up. Please turn everything off when exiting Cubase.
I have the same Issue with CMC-QC not working with the EQ… ironically i can assign knobs in I/O learn mode but dont have the same functionality like its suppose to be. looking forward to the fix. i dont really want to go back to cubase 6 just to have EQ functionality
I have recently purchased Cubase 7 and the CMC-CH controller. These have both been registered on my new Steinberg account. I am running Windows 7 64Bit, with Cubase 64Bit installed.
For some reason I cant get my CH controller to work.
I have run the setup for 64Bit from the CMC Tools disk, and the unit does come on and is responsive to touch etc. However Cubase does not seem to pick it up.
I have gone to “Device Setup”>Remote setup, but it still reads nothing. I have plugged in the unit before opening Cubase as stated.
I logged onto the hub and installed the latest Driver but still nothing. I have also updated Cubase 7 to 7.0.1
I have checked the forums and this seems to be a common issue among these controllers, but with no clear solutions.
Yeah, Iv tried that. I click the ‘plus’ sign, a dropdown menu comes up, I click on CMC-CH and nothing happens.
I tried restarting and nothing… So frustrating
Doesn’t give me any options… like I said "I go to “Device Setup” I click the ‘plus’ sign, a dropdown menu comes up, I click on CMC-CH and nothing happens. When it recognises the controller, Its supposed to appear under “Remote Devices” and from there I could set up - except it doesnt “recognise” it, no matter how many times I reinstall the drivers etc.
I bought this cmc ch just for a day, and i already have a problem: when i try to make global bypass of insert eq send with shift is not working - with my cubase 7!!!
I already have problems with my cmc qc, now with this to.
EQ not working with Cubase 7 (32bit, running on WIN7 64bit) here either. Spent half the day uninstalling/reinstalling the CMC Tools, reverting back to its factory state and playing with the QC settings in the Device Manager until I read this post. I can set it up within Quick Controls fine but it’s not responding to commands in EQ mode. Any update on the fix?