Selecting Audio Input

Selecting Audio Input

Postby Moon Wolf » Fri Jan 11, 2013 5:53 pm

I'm using an iTrack Solo and trying to record a mono track from the 1/4" input, which is channel 2 on the interface. The only way I can get a signal is by selecting the stereo input and then I just get sound on the right. Only options for audio input are mono 1, which only draws from channel 1 on my interface, or stereo, which is described above. Am I missing something? I must be, right?
Moon Wolf
New Member
 
Posts: 8
Joined: Fri Jan 11, 2013 5:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Moon Wolf » Sun Jan 13, 2013 7:37 am

Trademark Steinberg "support." No answer and no clue how their own software works, or doesn't as is the case. Please don't claim compatibility with a device if it only recognizes one of two inputs. Seriously guys. Hopefully, I am wrong, but the silence in response to this post is telling.
Moon Wolf
New Member
 
Posts: 8
Joined: Fri Jan 11, 2013 5:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Tlgdmb123 » Sun Jan 13, 2013 11:01 pm

Hi Moon Wolf, this is not a cubasis only problem none of the other music apps I have seems able to properly identify inputs available. I use a cheap little usb audio interface which has mic,line and digital inputs. With one exception none of the apps recognise the inputs available and all default to the mic input.

The exception is...Garageband. It correctly identifies all the inputs and allows selection of left,right and stereo line inputs,mic input or digital. There is a trick that selecting the input in Garageband and then closing Garageband and loading up another app keeps the input selected in Garageband. So if you have Garageband might be worth a go.

Not one of the other app developers have addressed this either nor do they seem to show any intent to do so either.

I think there is something in IOS that apple know the others dont.

Hope this may help
Tlgdmb123
New Member
 
Posts: 8
Joined: Thu Jan 03, 2013 12:24 am
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Moon Wolf » Mon Jan 14, 2013 2:26 am

Thx, Tlgdmb123. Appreciate the "input."
Moon Wolf
New Member
 
Posts: 8
Joined: Fri Jan 11, 2013 5:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Hiltmann » Mon Jan 14, 2013 10:18 am

Hi Moon Wolf,

1. Select "mono input" on audio input
2. Touch the digit "1" for one time, wich is shown in the channel display
Result : Digit "1" changed to "2" in the audio input channel display

I am testing the Fokusrite iTrack, audio recording on mic input "1" and line input "2" works as expected.
Let me know, if it's not working on your side.

best
jan
Jan Hiltmann, Product Planning / Quality Assurance
Steinberg Media Technologies GmbH
Hamburg, Germany
User avatar
Hiltmann
Steinberg Employee
 
Posts: 82
Joined: Mon Jan 07, 2013 11:41 am
Has thanked: 0 time
Been thanked: 8 times

Re: Selecting Audio Input

Postby Moon Wolf » Mon Jan 14, 2013 6:11 pm

Amazing! Thx, Hiltmann! I'll test that out tonight. Much apprecieated.
Moon Wolf
New Member
 
Posts: 8
Joined: Fri Jan 11, 2013 5:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Moon Wolf » Mon Jan 14, 2013 11:23 pm

Definitely works. Thx again! Sure would be nice if that was mentioned anywhere in the documentation and/or there was any follow up from Steinberg support.
Moon Wolf
New Member
 
Posts: 8
Joined: Fri Jan 11, 2013 5:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Selecting Audio Input

Postby Frieder » Tue Jan 15, 2013 8:38 am

Moon Wolf wrote:Definitely works. Thx again! Sure would be nice if that was mentioned anywhere in the documentation and/or there was any follow up from Steinberg support.


Hello,

thank you. I will make sure that this is added to the manual of Cubasis.

Kind regards,
Frieder
Frieder Loch, Software Developer
Steinberg Media Technologies GmbH
Hamburg, Germany

Check out Steinberg on YouTube, Twitter and Facebook!
User avatar
Frieder
Moderator
 
Posts: 277
Joined: Sat Dec 22, 2012 2:56 am
Has thanked: 0 time
Been thanked: 1 time


Return to Cubasis

Who is online

Users browsing this forum: No registered users and 5 guests