Effects order of precedence question

In the audio montage, one can add effects in the master section, at the track level, and per clip. My question is this: what is the signal flow? In other words, which effects section comes first, second, then third? Can’t seem to find the answer in the manual.

Thanks for your help.

Not sure if it was in the WL7 manual, but this is from WL8:
The audio signal flow goes through the various sections of WaveLab in a certain way.
• Read audio clip samples
• Clip envelope (unless post-effects mode is active)
• Clip effects
• Clip envelope (if post-effects mode is active)
• Clip pan
• Clip individual gain (Clips window)
• Clips are mixed into the track slot (for example, overlapping clips)
• Track effects
• Track leveling/surround pan
• Each track is mixed into a bus that has as many channels as defined by the Audio montage properties (between 1 to 8, usually 2).
• These audio channels are processed through the plug-ins of the master output.
• These channels are then sent to the Master Section input.

Master Section:
• Channels/sample rate might change at each plug-in slot
• Master Section meters
• Master Section Dithering slot
• Independent meters
• Playback or file format rendering

This is exactly what I needed to know Arjan. Thank you very much.

You’re welcome. I forgot to mention, this line only applies to WL8, since 7 doesn’t have that feature:
‘• These audio channels are processed through the plug-ins of the master output.’
It sounds a bit confusing this way, I guess a better name would be Montage Master Section…