Hi all,
After reading all the information here I am still at a loss because I cant get VST Connect SE to work properly!
In a nutshell I can hear the artist, he can hear me, he can hear the recording when it starts, it starts to record then suddenly the recording drops out! The artist can still hear the music track and he doesn’t hear it stop the audio track just stops recording what he is playing!! I have 2 full blue bars at the top so I would appear to have good signal strength in both directions, and they never go into the red area!
My sig is below and we are both using Steinberg CI 1 interface, I have altered all the parameters I can at both ends, as instructed in the manual, we have both gone to a wired connection as opposed to wireless, but no change!! I am stumped!
Basically I have run out of options so am I missing something simple here?
And before anybody chimes in with RTFM, I already have and I have used Musiculums post on how to set up VST connect within a programme, but still didn’t get it working properly!
I am using a piece of music with 6 audio guitar parts and 2 midi parts on it as a “test” project and the artist is trying to put a drum track on the piece! I am bouncing the entire piece (audio & midi) down to one and using that as the track I am sending to the artist. As I always record in Flac format that is the file I am using, is there any reason that would cause this issue?
This is the first time I have played with this since the latest Cubase 7.06 update and I know, with other issues on this forum, one of the normal solutions is to “trash the preferences” so do I need to something like that here?
Anyway I am stumped and that is a great disappointment to me because even the SE version would be a very useful tool if I could get it to function properly!
So if anyone has any ideas or could offer any advise it would be greatly appreciated.
Jim B