Cycle Markers Question

Keyplayer · January 20, 2014, 1:11pm

Tumppi Järnefelt:

Keyplayer:

Tumppi Järnefelt:

Weird. Works for me. Have done it a lot when doing ADR… Bye / Tumppi

So, if I’m understanding this correctly, you can:
Set a project range from Bar 001 - Bar 200
Set up several locate points (Bar 001, Bar 20, Bar 36, Bar 150, etc)
Insert a Cycle Marker with parameters defined as Bar 10 to Bar 20 (WITHOUT CHANGING THE PROJECT SETTINGS OF 1 - 200)
Activate the Cycle Icon in the transport section, hit play on that activated Cycle Marker and it will contiuously loop between bar 10 - 20 even though the Transport Project parameters still say 1 - 200?

I don´t do music so no bars for me (except when I need a drink). I work with timecode.
I have a project. I set up needed cycle markers, add text (the line talent must replace). Have sync selection selected in the markers prefs. Then I can loop what ever cycle marker that is chosen. I choose which cycle marker I want from cycle marker window and start looping…
One question… Does your locators move to the start and end of the chosen loop when you select a loop?

Bye / Tumppi

Timecode and Bars are the same thing for the purpose of this discussion. Yes, my locators move to the star and end of the selected loop. The big question is do you have to reset the range (Timecode or Bars & Beats) in the transport window in order to create EACH loop? If you do, then both of our systems work the same and the description about the cycle markers is misleading. If you don’t then, I am leaving out some kind of step that will make my loops engage in this mode.