The Getting Started manual for the UR44 has technical specs but it doesn’t seem to be available as a download.
Here’s a few details for you all.
The manual contained some errors in the specs. I have updated them from an Errata document and highlighted them in red below. I have left the incorrect values and placed them inside { } brackets.
Mic Input 1-4 (balanced)
- Freq Resp +0.1/-0.2 db, 20 Hz to 22 kHz
Dyn Range 101db, A-Weighted
THD+N 0.003% 1Khz, -1dBFS, 22Hz/22Khz BPF
Max Input Level +4dBu {-4dBu}
Gain Range +8dB - +52dB {+16db - +60db}
Hi Z Input 1/2 (unbalanced)
- Max Input Level +8.5 dBV
Input Impedance 1M ohm {500k ohm}
Gain Range ±0dB to +44dB
Line Input 3/4 (balanced/unbalanced)
- Max Input Level +24dBu {+22dBu}
Input Imp 20k ohm
Gain Range -12dB - +32dB {-10dB - +34dB}
Line Input 5/6 (balanced/unbalanced)
- Freq Resp +0.1/-0.1dB, 20Hz to 22kHz
Dyn Range 102 dB, A-Weighted
THD+N 0.001%, 1kHz, -1dBFS, 22Hz/22kHz BPF
Max Input Level +22dBu {+16dBu}
Input Imp 30k ohm (+4dBu input), 20k ohm (-10 dBV input) {20k ohm (+4dBu input), 10k ohm (-10 dBV input)}
Gain Selection -10dB or +7.8dB switchable {-4dB or +7.8dB switchable}
Line Output 1-4 (balanced/unbalanced)
- Freq Resp +0.1/-0.1dB, 20Hz to 22khz
Dyn Range 106dB, A-Weighted
THD+N 0.001%, 1kHz, -1dBFS, 22Hz/22kHz BPF
Max Output Level +16dBu
Output Imp 75 ohm
Main Output (balanced/unbalanced)
- Freq Resp +0.1/-0.1dB, 20Hz to 22khz
Dyn Range 106dB, A-Weighted
THD+N 0.001%, 1kHz, -1dBFS, 22Hz/22kHz BPF
Max Output Level +16dBu {+18dBu}
Output Imp 75 ohm
Phones 1/2
- Max Output level 35mW + 35mW, 40 ohm
USB
- Specification USB2.0, 24 bit, 44.1/48/88.2/96/176.4/192 kHz
Cheers
Stevo…