If you turn off “Set Remote Control Focus for VST Quick Controls” - the little button to the lower right of the Instrument on the VST Instruments panel - and make sure “Remote Control Focus follows Track Selection” on the drop down menu (upper right - same panel) is Off then Shift/Master will take you to the Track Quick Controls.
Switching the “focus” button on and off will instantly take you back and forth between Track and VST QCs.
Could someone make an xml script (like our mighty Msterna’s) to move 24 ch’s at once with the “bank +” button, not by 8? I have a 24 track Tascam US2400 and this feature would be really useful for me (and for others maibe - I also wrote in the issues report area). I tried for no good to edit his xml… Thanks in advance
Finally!! Thank you Steinberg for the MCU group buttons fix!!
Also the fact that the bank buttons now have the bank function by default instead of channel and having to shift click everytime you reopen a session is great!! Thx!
I’m playing around with the new functions and I really love it! Especially the EQ control, much better now.
I’ve found one annoying thing in the channel strip control though: page 1 allows you to switch the modules on and off BUT this is not the same as bypassing the modules. So there’s no visual indication in Cubase at all to show if the module is on or off. I think it would make much more sense if the on/off function actually bypassed the module. As it is now, it can lead to confusion when a module is not bypassed and still turned off, with nothing to indicate that state.
To my knowledge Control+Tab is a windows command which makes the focus cycle through any open widows such as project page to mix console1 to an open VSTI to project page etc.
Unfortunately I can’t find any Key Command for this in Cubase, therefore it’s not possible to assign this to an assignable function button on the Mackie?
Am I overlooking something here? It would be nice to simply press an assignable button on the Mackie (or in my case Qcon Icon) to cycle through the open windows.
I would love to have a way to make my MCU bring to front what I’m tweaking (Plugin, Send ect).
When I’m on plugin mode, pressing the 1st knob on the left (where you choose what plugin slot you want to tweak) should bring the plugin to front!!
Please Steinberg put that in next update.
I’ve noticed something lately: Often when I load a project, I cannot control anything from the buttons on my MCU Pro. I need to sort of “wake it up” by touching one of the faders. I’m using two extenders, and touching the faders on any of them will wake them all up. The units receive data fine, but only start transmitting after the fader touch.
There are way too many factors involved unfortunately. I built a new computer at the same time as installing 7.5, and I also switched from WinXP to Win7, so any of these factors could cause it. But I’m wondering if anyone else is experiencing the same thing perhaps?
I saw now that it’s the same in 6.5.5 (64 bit) so maybe it’s hardware or OS related rather than Cubase. Never had this problem with the previous computer. I could wake it up by moving the jog wheel though which I prefer to moving faders.
I’ve also had problems with the scribble script not loading correctly. I have to go to device setup and reset the affected unit to fix it. After that it works flawlessly.
Didn’t get a chance to check it again in 751. Definitely works for me in 752. Pushing shift makes the bank buttons become channel ( or the other way around . . Not in front of it right now).