UR44 instrument input

This section is about Steinberg's USB audio interfaces UR824, UR28M, UR44 and UR22

UR44 instrument input

Postby dimi3 » Thu Apr 17, 2014 11:11 am

Hi,

I can’t find this info in technical specs. Does anyone have info what is the impedance of instrument input?

Thank you,
dimi3
New Member
 
Posts: 2
Joined: Thu Apr 17, 2014 11:07 am
Has thanked: 0 time
Been thanked: 0 time

Re: UR44 instrument input

Postby Rimshot51 » Thu Apr 17, 2014 1:30 pm

The instrument input is hi z and lo z depending on the plug used.
Rimshot51
New Member
 
Posts: 35
Joined: Fri Mar 21, 2014 4:45 am
Location: Central California
Has thanked: 0 time
Been thanked: 1 time

Re: UR44 instrument input

Postby BriHar » Thu Apr 17, 2014 2:25 pm

Mic/Line Inputs: 4k bal.
HI-Z Input : 500k unbal.
Line Inputs : 20k bal, 10k unbal.

This is from the Getting Started PDF for the UR28M, I would assume the specs are the same for the other members of the UR family.
...yes I think it can be easily done, just take everything down to Highway 61.

Sun Point Studio Turbenthal, Switzerland


Cubase 7.5.20 - 64bit | Cubase AI7 | WaveLab 8 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 8GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 7 Pro 64 Bit
User avatar
BriHar
Senior Member
 
Posts: 1888
Joined: Wed Dec 15, 2010 11:10 pm
Has thanked: 13 times
Been thanked: 128 times

Re: UR44 instrument input

Postby dimi3 » Fri Apr 18, 2014 8:40 am

thanks, I was hoping ur44 have proper HiZ input (1Mohm), but its not specified officially in manual...I will try to contact support for answer. 500Ohm is not proper HiZ.
dimi3
New Member
 
Posts: 2
Joined: Thu Apr 17, 2014 11:07 am
Has thanked: 0 time
Been thanked: 0 time

Re: UR44 instrument input

Postby stevo1080 » Sat Apr 19, 2014 10:03 am

dimi3 wrote:thanks, I was hoping ur44 have proper HiZ input (1Mohm), but its not specified officially in manual...I will try to contact support for answer. 500Ohm is not proper HiZ.


The HiZ is 1Mohm. The original getting started manual contained incorrect information and an errata document quoted the correct values.
Check out the following post where I have listed the full details of the UR44 inputs/outputs/sample rates etc

viewtopic.php?f=157&t=50168

Cheers

Stevo.. :D
stevo1080
Junior Member
 
Posts: 60
Joined: Fri Feb 08, 2013 6:33 pm
Location: Scotland
Has thanked: 1 time
Been thanked: 1 time

Re: UR44 instrument input

Postby BriHar » Tue Apr 22, 2014 9:54 am

Thanks for that Stevo, never seen a Revision or an Errata Sheet for the UR28m Getting Started that I'm Aware of.
...yes I think it can be easily done, just take everything down to Highway 61.

Sun Point Studio Turbenthal, Switzerland


Cubase 7.5.20 - 64bit | Cubase AI7 | WaveLab 8 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 8GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 7 Pro 64 Bit
User avatar
BriHar
Senior Member
 
Posts: 1888
Joined: Wed Dec 15, 2010 11:10 pm
Has thanked: 13 times
Been thanked: 128 times

Re: UR44 instrument input

Postby stevo1080 » Sun Apr 27, 2014 8:59 pm

BriHar wrote:Thanks for that Stevo, never seen a Revision or an Errata Sheet for the UR28m Getting Started that I'm Aware of.


This is for the UR44 but I thought the Ur28 had the same specs?
Here's the errata sheet that was with the UR44

image.jpg
(1.45 MiB) Not downloaded yet


Cheers

Stevo.. :D
stevo1080
Junior Member
 
Posts: 60
Joined: Fri Feb 08, 2013 6:33 pm
Location: Scotland
Has thanked: 1 time
Been thanked: 1 time


Return to Steinberg UR Series

Who is online

Users browsing this forum: No registered users and 0 guests

cron