Hi,
Manual p.208
Saving and Loading Selected Channel Settings
It is possible to save MixConsole settings for selected audio-related channels. You can load these later into any project. Channel settings are saved as MixConsole settings files with the file extension .vmx.
1.Open the Functions menu on the MixConsole toolbar and select “Save Selected Channels”.
A standard file dialog opens where you can specify the file name and location.
The input/output routing is not saved.
To load MixConsole settings saved for selected channels, proceed as follows:
1.Ensure that you select a number of channels that corresponds to the number of channels for which you saved the settings.
The settings are applied in the same order as they were saved. For example, you save the settings for channels 4, 6, and 8 and apply these settings to channels 1, 2, and 3. In this case, the settings saved for channel 4 are applied to channel 1, the settings saved for channel 6 are applied to channel 2, and so on.
2.Open the Functions menu on the MixConsole toolbar and select “Load Selected Channels”.
A standard file dialog opens that allows you to locate the settings file.
3.Select the file and click Open.
The channel settings are applied to the selected channels.
Resetting MixConsole Channels
You can reset all or selected channels on the MixConsole to their default settings.
1.Open the Functions menu in the MixConsole toolbar and select “Reset MixConsoles…”.
2.Decide if you want to reset all channels or only the selected channels.
All EQ, insert, and send effect settings are reset. Solo and Mute buttons are deactivated, the volume fader is set to 0 dB, and pan is set to the center position.
!
When you apply MixConsole settings to fewer channels than those contained in the settings file, some of the saved settings are disregarded. Since the saved settings are applied from left to right as shown in the MixConsole, the settings for the channels that remain on the right are not applied to any channels.