Export Quality and Drums Question

Cubasis
7

Hi epjl2000

What you need to do is add a midi track for each drum sound and load MiniSampler into each track.

If you prefer to work with a single track while composing your beats, do this on a single track, then when you are ready to export

  • copy your drum track x number of times and load MiniSampler into each one,
    Delete the midi notes not needed for each track. E.G for your kick track delete all but the C1 notes.

This sounds like a lot of work but with the zoom and Select functions is actually very quick to do.
TIPS

  • Glue all parts on the track together before copying, then you can edit the whole track in one go rather than going into each individual part on the track.
    If you want to edit ALL tracks as one again, you can drag all of the parts onto a single track, Glue them, and hey presto you are back to where you started.

If you are inputting your midi from a controller you may be able to do the following, depending on your controller.

  • Create a MIDI track for each drum and load MiniSampler onto them.
    set the MIDI In Channel to a different one for each track.
    set the individual pads/Keys on your controller to send to the relevent MIDI channel.

Then when recording the midi notes get recorded onto the correct track. I do this using the Alesis Trigger IO to record onto separate tracks from my (modified) Rockband drumkit :sunglasses:

Thanks

Andy