emery
July 8, 2015, 2:11pm
1
Hi Tim,
I am experiencing this since Yosemite install. If my card is set to 44100 or 48000
And the file is in different sample rate. I play it, WL tried to change the sample rate in the card and crashes.
Rarely it works without crashes but 90% it crashes. Is it possible to fix it in WL?
I have got Prism Sound Orpheus
Regards
Denis
I could be specific to your sound card. I use a Lynx AES16e here and haven’t had issues when Wavelab 8.5.30 commands a sample rate change to the card.
UPDATE. Naturally, when I attempted to triple check this, I did get a crash but I can’t be sure it was sample rate related. I did some stress testing after relaunching WL and can’t get a crash.
Attached is the crash log.
WaveLab 8.5_2015-07-08-122716_Mystery-Room-iMac-2.crash.zip (23 KB)
emery
July 8, 2015, 5:35pm
3
Yeah I think that the card might take longer to change sample rate and WL just crashes. It was never the case before Yosemite.
PG1
July 9, 2015, 4:49am
4
Try to toggle this setting:
emery
July 9, 2015, 11:49am
5
Hi PG,
this setting is already enabled, so should be something else.
I have contacted Prism Sound, they just got license fro Wavelab and are going to test it as well.
Best Regards
Denis
PG1
July 9, 2015, 12:46pm
6
It is recommended to have the setting enabled. But in rare cases, it is better when not enabled. This is why I suggested you to toggle it.
emery
July 9, 2015, 1:21pm
7
ohh, disabling it helped, no more crashing:)
Cheers
D