Steinbeg Atari mini MIDEX? Can anyone tell me what its called?
It needs power and I don’t know the voltage (plus is center pin as far as I can see)
Driver for Cubase ST??
See image
Hope someone can help, will be so thank full
It needs power and I don’t know the voltage (plus is center pin as far as I can see)
Driver for Cubase ST??
See image
Hope someone can help, will be so thank full
I have been told it’s called Steinberg PCI3 MIDI interface or MIDI-3
Do anyone have driver file for ST cubase and information on spec’s for the PSU?
I got zero response in the forum. But I have manged to collect all needed info and it’s running fine now:
The Mros driver is STMI3_5.DR. The MIDI 3 needs 7.5 volt dc (300ma is plenty) (original psu is 9v 150 ma) with positive in center pin. There’s a row of dip swiches inside and moving all to the other side will make the MIDI 3 fit a PC (not tested). I needed to move mine to get the ST to see the MIDI 3, so it must have sat on PC mode.
On Mega’s you need a printer cable since the power plug does it impossible to mount the MIDI 3 directly on the computer. I have a mega.
In Cubase lite you can’t use it. In Cubase 2.0 You can use all 3 outs but not the input. In Cubase 3 all 3 outs and the one input can all be used.
Remember to add an ‘V’ to the driver file (STMI3_5.DRV) to make it active and place it in the mros folder and possible update Mros to newest version.
Always nice to see such old hardware still working fine
I’m afraid you’re one of a few people worldwide still using that thing (and an ATARI), which explains the silence here.
I think there are more than just a few who uses the Atari ST for Cubase.
If you go to the Atari ST forum elsewere on the web, there are more response on the subject.