Microphone not working with UR22mkii

Steinberg Hardware UR Series
2

I looked up your mic, and it looks like it needs 48V phantom power.

  1. Turn the gain nob on your mic down to zero.
  2. Turn the the phantom power switch on the back of the UR22mkii to on (it’s above the Line Output plugs on the back).
  3. Turn the gain nob on your back up slowly until it’s loud enough to work with.

Also turn the phantom power switch off when not using it, and don’t unplug the audio interface while the phantom power is turned on - it could damage the mic.