UR44 iPad-Probleme

Hallo liebe Forumsmitglieder,

Mein Name ist Andi und ich bin neu hier. Ich habe gestern mein neues UR44 bekommen und finde es klingt mal richtig gut. Ich nutze es ausschließlich mit einem IPad Pro oder Ipad 3 mit Cubasis. Da ich keinen tollen PC/ Mac habe, bleibt mir nur das Ipad. Das funktioniert auch echt gut. Jetzt das Problem:Ich kann das dspMixFx in meinen Ipaddys starten, jedoch blinkt immer das USB- Signal und es kommt keinerlei Verbindung zustande. Das UR 44 ist nagelneu und das Ipad Pro ebenfalls. Da das Ur 44 neu ist, gehe ich zumindest davon aus, dass die Firmwareversion 2.1 sein müsste. Wenn ich den Aufkleber auf der Unterseite richtig deute, ist das Produktionsdatum im Juli 2016 gewesen. Da müsste doch dann mind. version 2.1 drauf sein. Das UR 44 war bisher noch nicht an einem Computer angeschlossen. Aber wozu auch, wenn es die App gibt. Im Prinzip ist es nicht so schlimm, da ich so halt alles über Cubasis mache. Gitarre spiele ich (noch) nicht und so nutze ich Mikros und Keyboards. Aber irgendwie wurmt es mich trotzdem, dass das nicht geht. Ich habe alles mögliche ausprbiert. Div. Reihenfolgen beim Einschalten, neu installation, div. ipads - no way. Hat mir jemand eventuell einen Tipp, was ich tun kann ? Oder bleibt nur der Weg, das Teil man an den PC anzuschließen ? Vielleicht hat ja jemand ähnliche Erfahrungen- aber vermutlich bin ich hier Einzige, der mit PC nicht so bewandert ist. Sorry dafür. Ich würde mich sehr freuen, wenn der Eine oder Andere mir hierzu vielleicht was schreiben könnte. Vielen lieben Dank vorab - und ich behalt die Wunderkiste in jedem Fall - ob mit oder ohne dieses Dsp- Dingens. Denn mit den Aufnahmen bin ich sehr zufrieden.
Liebe Grüße
Andi

Hallo,
wurde der Schalter für den CC Mode Betrieb auf der RÜckseite des UR44 korrekt geschaltet?
Viele Grüße,
Stefan Schreiber

Hallo Stefan,

ja Schalter ist auf CC- das UR44 leuchtet auch konstant ( auf der Frontseite) und über Cubasis hab ich sehr gute Aufnahmen gemacht. Vielleicht muss das Teil doch mal vom PC “geimpft” werden. Updates prüfen etc. ich glaub ich komm nicht drum herum. Das wär für mich noch die einzigste Erklärung.

Vielleicht habt Ihr ja noch ne Idee

Danke

Viele Grüße

Andi

Hallo Freunde,

Problem gelöst - es war wirklich noch Firmwareversion 2.0 drauf

2.11 installiert - jetzt läuft alles einwandfrei. No more Problems !

Danke !

Viele Grüße

Andi

I have a UR44 and want to use it with my IPAD Air 2 for use with Cubasis.

I am using an IPAD Air 2, model MH322LL/A, OS ver. 10.2.1 (14D27).

When I connect my UR44 with the Apple Lightining to USB Camera Kit to the IPAD Air 2, I get the following message, as do other people: “I get the error.CANNOT USE DEVICE Steinberg UR44: The connected device is not supported.”

I have read all the fixes and tried all of them with no luck. I have done the following:

  1. I have rebooted everything and turned off and on in every possible way.
  2. I replaced the Lightining to USB Camera Kit with one purchased from the Apple Store definitely made BY APPLE.
  3. I have tried numerous different USB cables, to connect to the Lightning to USB connector.
  4. I have tried plugging the UR44 directly into a wall socket (as someone mentioned that worked for them).
  5. I have tried shutting down the IPAD, and rebooting; and have tried turning on the UR44 first, then the IPAD, and vice versa as well as every other possible variation…
  6. My PC and MAC firmware on the UR44 is up-to-date.
  1. The IPAD Software is the most current: OS ver. 10.2.1 (14D27).
    The only other thing I have not tried but have seen online suggested is, I have not reset the IPad to Factory Settings, nor have I completely re-installed the Ipad software.

Is there anything else I can try? If not, what is my next step? Should I reset the Ipad to factory settings? What if that doesn’t work?

Please help. It seems that whenever I upgrade or buy something new from Steinberg, I am one of the select few that it doesn’t work properly in the beginning and it is quite frustrating, as I m sure you know.

Thank you,
marsx