What is "Enable Auto Select"?

This section is about Steinberg's CMC controllers
Post Reply
AndyThommen
Junior Member
Posts: 100
Joined: Thu Jan 27, 2011 2:19 pm
Location: Switzerland
Contact:

What is "Enable Auto Select"?

Post by AndyThommen » Thu May 17, 2012 5:44 am

Hi all.

Found that check box in all CMC dialog box, but no hint in the manual about its function. Tried it but did not notice anything.

Any hint?

Andy.
SW: Cubase 8.0.20, OSX 10.13.1, MacMookPro (mid 2014), 15", 2.2GHz i7, 16GB, 256GBSSD, UAD Apollo8 TB Quad + Satellite Quad

User avatar
istokblues
Junior Member
Posts: 63
Joined: Sat Jul 16, 2011 9:30 am
Contact:

Re: What is "Enable Auto Select"?

Post by istokblues » Thu May 17, 2012 2:41 pm

+1 good question !
istok

JamesTNL
Junior Member
Posts: 67
Joined: Tue May 15, 2012 9:59 pm
Contact:

Re: What is "Enable Auto Select"?

Post by JamesTNL » Thu May 17, 2012 3:09 pm

Do you mean from within the Device Setup screen? From the Cubase manual:
If this option is activated, touching a fader on a touch-sensitive remote control device automatically selects the corresponding channel. On devices without touch-sensitive faders, the channel gets selected as soon as you move the fader
Cubase 7.06 - Windows 7 Ultimate x64 - ASRock B85M-ITX - Intel Core i5 4570S - 2 x 8GB Crucial Ballistix Sport DDR3 - Dawicontrol DC-FW800 PCIe - Presonus Firebox - Xigmatek Nebula - be quiet! Pure Power L8 430W CM - Steinberg CMC-AI - Steinberg CMC-TP - Steinberg CMC-CH

User avatar
istokblues
Junior Member
Posts: 63
Joined: Sat Jul 16, 2011 9:30 am
Contact:

Re: What is "Enable Auto Select"?

Post by istokblues » Fri May 18, 2012 1:55 pm

JamesTNL wrote:Do you mean from within the Device Setup screen? From the Cubase manual:
If this option is activated, touching a fader on a touch-sensitive remote control device automatically selects the corresponding channel. On devices without touch-sensitive faders, the channel gets selected as soon as you move the fader
THANK YOU JamesTNL !
istok

chikitin
Member
Posts: 501
Joined: Mon May 16, 2016 3:15 am
Contact:

Re: What is "Enable Auto Select"?

Post by chikitin » Wed Feb 27, 2019 2:15 pm

Hi Folks,

On CMC-PD that does not have a fader, how this going to be useful please?
Laptop: MacBook Pro, 16GB RAM SSD 2TB, Cubase Pro 10, Latest Mac
NI Komplete, EWQLSO
Keyboard: Yamaha PSR-A3000
Interface: Steinberg MR-816CSX, NI Audio Kontrol
Controller: Steinberg CC121, Korg 2

Post Reply

Return to “Steinberg CMC Series”

Who is online

Users browsing this forum: No registered users and 1 guest