Cue sheet vinyl

All topics on WaveLab 8 and WaveLab Elements 8
Post Reply
ErikWMP
New Member
Posts: 17
Joined: Mon Aug 19, 2013 11:50 am
Contact:

Cue sheet vinyl

Post by ErikWMP » Fri Dec 01, 2017 4:19 pm

I'm using Wavelab to create a cue sheet for a record that is going to be pressed on vinyl, and I'm running into this annoying problem that Wavelab, seemingly regardless of settings used, adds a 2 second pause at the start of the CD report. To be clear - the pause is only there in terms of numbers on the CD-report, however there is no pause in the actual audio montage. This results in that the meta data within the audio montage is correct, but the CD-report is 2 seconds off.

How can I get around this?
Attachments
CD Report.png
(43.94 KiB) Not downloaded yet
Metadata.png
(38.43 KiB) Not downloaded yet

PG
Moderator
Posts: 6334
Joined: Wed Dec 15, 2010 6:15 pm
Contact:

Re: Cue sheet vinyl

Post by PG » Fri Dec 01, 2017 7:16 pm

You should try the "Start Time (in audio montage)" option in the CD Report dialog.
Philippe

ErikWMP
New Member
Posts: 17
Joined: Mon Aug 19, 2013 11:50 am
Contact:

Re: Cue sheet vinyl

Post by ErikWMP » Sun Dec 03, 2017 10:00 am

Hi PG,
Thank you! I can see that puts in the correct times in the CD Report under its own column "Start (Montage)" Which is nice.
However - the CD cues are still off by 2 seconds compared to if I check the DDP (with HOFA for example). See screen shots.

Shouldn't CD-time be identical on both DDP and CD report as both as been generated with the same software?
Attachments
Screen Shot 2017-12-03 at 09.59.38.png
(69.06 KiB) Not downloaded yet
Screen Shot 2017-12-03 at 09.53.10.png
(229.84 KiB) Not downloaded yet

bob99
Senior Member
Posts: 2228
Joined: Fri Jan 07, 2011 2:49 am
Contact:

Re: Cue sheet vinyl

Post by bob99 » Sun Dec 03, 2017 10:22 am

It's been like that in mastering programs for the CD PQ sheet since long before Hofa. I don't think it should be changed.

What Hofa displays in a window, or playlist, and what it might print out in a PQ sheet might be different. Like the Wavelab CD tab listing doesn't start at 2 seconds I don't think, unless I just never noticed.

I think you can get rid of the CD column on the sheet in Wavelab 9 for vinyl or files.
Last edited by bob99 on Sun Dec 03, 2017 9:55 pm, edited 2 times in total.

PG
Moderator
Posts: 6334
Joined: Wed Dec 15, 2010 6:15 pm
Contact:

Re: Cue sheet vinyl

Post by PG » Sun Dec 03, 2017 3:59 pm

I think you can get rid of the CD column on the sheet in Wavelab 9 for vinyl or files.
Yes
Philippe

Post Reply

Return to “WaveLab 8 | WaveLab Elements 8”

Who is online

Users browsing this forum: Musicouture and 1 guest