UR22mkII on all the time?

Find topics on computers, studios and music-related hardware.
Post Reply
gutterfish
New Member
Posts: 4
Joined: Sat Jun 09, 2018 8:34 am
Contact:

UR22mkII on all the time?

Post by gutterfish » Fri Jun 15, 2018 11:54 pm

Hi,

Do you think it's a bad Idea to have the unit turned on 24/7?
I would like to use the unit as the primary sound source for my computer but I'm wondering if having it turned on and working 24/7 might significantly shorten it's life? What do you think?

Thanks

User avatar
Prock
Senior Member
Posts: 2741
Joined: Sat Jan 05, 2013 4:22 pm
Location: Connecticut, USA
Contact:

Re: UR22mkII on all the time?

Post by Prock » Fri Jun 29, 2018 1:27 am

My opinion...

I think it would be fine and last as long as any other electronic device that stays on 24/7. Hopefully, to keep the heat down you can positioned it in a location that does not hamper air circulation.

FWIW... I had my old PreSonus Firebox interface hooked up to a power switch that had it and my PC plugged into. When I switched that power strip on it powered up the PC and Firebox. So, it wasn’t on all the time but, it was powered on whenever I had the PC running. That Firebox was purchased in 2008 and is still working today with that same PC.

Of course if it does crap out... you’ll be out $150. ;)

Regards. 8-)
PRock Studio

DAW: Cubase Pro 9.5.30, OS: Win 10 Pro x64, CPU: Intel Core i7 4700K @ 4.0GHz, RAM: 32GB/DDR4/2800MHz, Graphics: 4GB GeForce GTX 960, Mobo: MSI Z170A Gaming Pro Carbon, AI: PreSonus Studio 192 Mobile, Mic Preamp: PreSonus TubePre, Headphone Amp: PreSonus HP4, Studio Monitors: Mackie MR5, 3rd Party VSTs: VB3, SampleTank 3, Amplitube 4, Miroslav Philharmonik 2, EZDrummer 2

https://soundcloud.com/prockstudio

Nickeldome
Member
Posts: 361
Joined: Thu Aug 07, 2014 1:06 pm

Re: UR22mkII on all the time?

Post by Nickeldome » Wed Jul 04, 2018 1:06 pm

There are 2 things that make electronics suffer the most:

1. Temperature changes while operating and in particular overheating.
2. Switching off/on. Which automatically is related to (1) because it needs to warm up.

So if you can keep your unit switched on and can keep it on optimum operating temperatures theoretically your device will live longer than switching it off/on all the time.
Cubase Pro (always latest version) - Windows 10 Pro 64bit / Asus TUF Mark 1 X299 / i9-7900X (at 4.2 GHZ) / 64GB RAM / Geforce GTX 1060 6G / System drive Samsung M.2 1TB 960Pro / VST drives 3 x 1TB Samsung Evo / Audio/Archive drive 10TB Seagate Ironwolf - Audio interface: Roland UA-1610 / External gear: Kawai MP11 / Kurzweil PC88 / Sequential Circuits Prophet 5 / Roland JV1080 / Roland D50 / Korg 01/W / Elka EK22 – Midi controllers: SoundQuest 8port-SE / Nektar Panorama P1 / Roland Octopad II / Akai MPD18 - Main VST's: Kontakt 5 / Padshop Pro / Spectrasonics Omnisphere 2 & Trillian / Arturia V-collecion / Addictive Drums 2 / FXpansion BFD 3
All time user of Cubase since Atari V2 (around the 90’s)

Post Reply

Return to “Computer/Studio Hardware & Setup”

Who is online

Users browsing this forum: No registered users and 3 guests