Which impedance of headphones is ok for UR22C?

Find topics on computers, studios and music-related hardware.
Post Reply
evev
New Member
Posts: 3
Joined: Thu Jan 02, 2020 11:14 pm
Contact:

Which impedance of headphones is ok for UR22C?

Post by evev » Mon Jan 06, 2020 12:18 pm

Hey
I'm going to buy Beyerdynamic DT 770 Pro headphones and it has 3 options of impedance: 32 Ohm, 80 Ohm and 250 Ohm.
Which option should I take to get the optimal quality for UR22C?

Thank in advance for the answer

FL_Lover
New Member
Posts: 1
Joined: Thu Jan 09, 2020 10:54 am
Contact:

Re: Which impedance of headphones is ok for UR22C?

Post by FL_Lover » Thu Jan 09, 2020 11:00 am

I'd go for the 250 Ohm personally.

Nickeldome
Member
Posts: 739
Joined: Thu Aug 07, 2014 1:06 pm
Contact:

Re: Which impedance of headphones is ok for UR22C?

Post by Nickeldome » Sun Jan 12, 2020 12:27 am

All Beyerdynamic DT 770 Pro will work just fine on your Ur22C! But I'd go for 250 ohm version. The lower the impedance, the higher output you'll get. But also ...less ohm means less control from the amplifier's side on damping of low frequencies! So low impedance headphones (below 250 ohm) in general means higher output but also lower quality of sound. So It's up to you how loud you need to go? In general 250 Ohm is the standard for quality headphones and are usually loud enough to work on any heads out on any audio interfaces?: Most interfaces are calibrated for use of 250 Ohm headsets. So again, go for the 250 Ohm version.
Cubase Pro - Wavelab Pro (always latest version) Windows 10 Pro 64bit / Asus TUF Mark 1 X299 / i9-7900X (at 4.3 GHZ) / 64GB RAM / Geforce GTX 1060 6G / System drive Samsung M.2 1TB 960Pro / Kontakt drives 3 x 1TB Samsung Evo / Project/Audio/Archive drive 10TB Seagate Ironwolf - Audio interface: Roland UA-1610 / External gear: Kawai MP11 / Kurzweil PC88 / Sequential Circuits Prophet 5 / Roland JV1080 / Roland D50 / Korg 01/W / Elka EK22 – Midi controllers: Roli Seabord Rise 49, SoundQuest 8port-SE / Nektar Panorama P1 / Roland Octopad II / Akai MPD18 - Main VST's: Kontakt 6 / Padshop Pro / Spectrasonics Omnisphere 2.6, Trillian & Keyscape / Arturia V-collection / FXpansion BFD 3 / Toontrack Superior Drummer 3
All time user of Cubase since Atari V2 (around 1990)

Post Reply

Return to “Computer/Studio Hardware & Setup”

Who is online

Users browsing this forum: No registered users and 2 guests