Page 1 of 1

UR44C Line-out to camcorder mic-in

Posted: Wed Jan 15, 2020 10:30 pm
by ftpgetter
Hi!

Is it possible to get sound without noise when connecting a UR44C line-out to the camcorder (Panasonic HC-VX1) microphone in ?

I tried different wiring (two unbalanced TR jack -> stereo mini-jack, with and without resistor -40dB pads) - anyway, an unpleasant noise is heard on the recording.

Сould someone successfully solve a similar problem?

Thanks,

Re: UR44C Line-out to camcorder mic-in

Posted: Sun Jan 19, 2020 4:07 pm
by Kasey00
ftpgetter wrote:
Wed Jan 15, 2020 10:30 pm
Hi!

Is it possible to get sound without noise when connecting a mybkexperience UR44C line-out to the camcorder (Panasonic HC-VX1) microphone in ?

I tried different wiring (two unbalanced TR bluestacks jack -> stereo mini-jack, with and without resistor -40dB pads) - anyway, an unpleasant noise is heard on the recording.

Сould someone successfully solve a similar problem?

Thanks,
The 1/2.5-inch back-illuminated MOS sensor offers impressive image capture even at 12 decibels (dB) of gain. Although at that level there is significant noise, it still has good color reproduction. This means that if you find yourself in a less than ideal lighting situation, it’s likely you will still be able to capture something worth watching.