Musi,
Ok, the master fader on connect performer now works as it should. Excellent. As an aside, and I’ll update my other topic, the clipping problem on the 2408 mkiii is also fix. In this case, I was more rigorous in my testing as used a 0db full scale 440hz signal and the meter looked good and the output sounded right.
I did find a new problem which I will document later-- my connect and sync lights blink on and off and the meter signal (on both ends) come and goe. However, I need to test this more carefully to confirm it is not something on my end–and I just don’t have time right now.
Best, Ted