Routing mono channel to Group LFE

Post general topics related to Nuendo 7 here.
Post Reply
misjavw
Junior Member
Posts: 69
Joined: Mon Nov 05, 2012 3:57 pm
Location: Hilversum, The Netherlands
Contact:

Routing mono channel to Group LFE

Post by misjavw » Thu May 03, 2018 12:38 pm

I have a 5.1 project with multiple audio tracks and several 5.1 Group tracks. The groups are all routed to a 5.1 Master. I would like to have a few dedicated (mono) LFE audiotracks. I can route these exclusively to the LFE of the 5.1 master, but it is not possible to route them to the LFE channel of a Group channel.

It is possible to send the LFE audiotrack to the LFE channel of a Group by gaining the LFE send in the surroundpanner of the track, but then it is still also sent to the other channel(s) to which it is panned.

Is there any way to route the output of a mono channel to the LFE channel of a group?

Hugh
Member
Posts: 240
Joined: Wed Dec 15, 2010 8:24 pm
Contact:

Re: Routing mono channel to Group LFE

Post by Hugh » Sat May 05, 2018 4:41 pm

Hello,
Not sitting in front of the computer now but isn't that related to Child Busses in the I/O (F4)?
H

misjavw
Junior Member
Posts: 69
Joined: Mon Nov 05, 2012 3:57 pm
Location: Hilversum, The Netherlands
Contact:

Re: Routing mono channel to Group LFE

Post by misjavw » Mon May 07, 2018 8:42 am

Thanks for your help Hugh. You are absolutely right! I never knew this feature existed. I added an "all mono child busses" to the group channel, allowing me to route to the LFE bus of that group exclusively.

Thanks!!

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest