8Pre Interface

Find topics on computers, studios and music-related hardware.
Post Reply
Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

8Pre Interface

Post by Suprawill1 » Fri Jan 26, 2018 9:08 pm

Hi All,
Has anyone experienced the Focusrite Clarett 8Pre interface with Cubase 9.5? Currently, the Thunderbolt version is available but I'm still waiting for the new USB version and wondering if anyone's experienced any problems with the Thunderbolt.
Thanks for your thoughts.

Will
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Mon Jan 29, 2018 9:34 am

I heard this interface is pretty pristine for the price but nobody has stepped up to verify its performance with Cubase.
Anyone with experience?
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Wed Feb 07, 2018 9:22 am

Got a tech at Focusrite to verify the Clarett 8Pre works with Cubase.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

User avatar
Sonico
Junior Member
Posts: 63
Joined: Wed Dec 15, 2010 6:36 pm
Contact:

Re: 8Pre Interface

Post by Sonico » Wed Feb 07, 2018 5:55 pm

I am waiting for the Clarett 8pre USB too.
I have a Scarlett 18i20 and it has been working great with cubase but GAS just hit me hard when I saw the Clarett line going USB.
I am very interested in a review too so the first to have it please post your experience.
Latency, audio quality, etc.
Cubase 9.5.3
Focusrite Clarett 8pre USB
Desktop: Windows 10 64bit, Intel Core i7 3.2 Ghz, 16 GB RAM.
Laptop: Windows 10 64 bit, Intel Core i5 2.3 Ghz, 6 GB RAM.

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Wed Feb 07, 2018 7:59 pm

Sonico wrote:
Wed Feb 07, 2018 5:55 pm
I am waiting for the Clarett 8pre USB too.
I have a Scarlett 18i20 and it has been working great with cubase but GAS just hit me hard when I saw the Clarett line going USB.
I am very interested in a review too so the first to have it please post your experience.
Latency, audio quality, etc.
Will def post results. According to Focusrite, the Usb is supposed to have identical latency as the TB.
Almost went with the 18i20 because the 8Pre USB isn't supposed to hit market till April and my current interface is failing.
I then saw the Roland Studio Capture which also had good reviews and for the same price as the 8Pre, comes with 12 pre's with auto leveling, 16 analog inputs, DSP, individual channel phantom power, lo cut, phase inversion and a rock solid driver. A local sales tech talked me into waiting for the 8Pre.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

svennilenni
Senior Member
Posts: 2530
Joined: Sat Nov 28, 2015 3:21 pm
Contact:

Re: 8Pre Interface

Post by svennilenni » Wed Feb 07, 2018 8:04 pm


Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Wed Feb 07, 2018 9:45 pm

svennilenni wrote:
Wed Feb 07, 2018 8:04 pm
Computer/Studio Hardware & Setup Forum
Ok, I guess I am being told I am posting this in the wrong section. I would like to keep the continuity of this thread. Can it be moved to the proper section and keep it intact? Thanks.
Last edited by Suprawill1 on Fri Feb 09, 2018 6:09 am, edited 1 time in total.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Thu Feb 08, 2018 6:35 am

Just heard from my distributor. The 8Pre is still 60 days out. Hope this works great with Cubase. 2 great entities at work here.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

User avatar
The dman
Member
Posts: 349
Joined: Wed Dec 15, 2010 5:13 pm
Contact:

Re: 8Pre Interface

Post by The dman » Sun Mar 11, 2018 3:02 pm

I got a call from Sweetwater and they have them in stock and mine will be here Tuesday. I'll report back
Cubase 8.5.15 x64 Windows 10 Home
ASUS P8Z68-V GEN3/ i72600k / G.SKILL Ripjaw (4 x 4GB)/SeaSonic X750 Gold PSU/ RME HDSP 9652 / UAD2Quad// Alphatrack/ Alesis HD24XR

http://www.woodstockschoolofmusic.com/

http://www.davedaltonmusic.com

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Mon Mar 12, 2018 3:15 am

The dman wrote:
Sun Mar 11, 2018 3:02 pm
I got a call from Sweetwater and they have them in stock and mine will be here Tuesday. I'll report back
Looking forward to your report.
I couldn't wait, mine needed to be replaced before their projection. I ended up going with the Roland Studio Capture.
It's also a great unit and I don't think I settled.

https://www.sweetwater.com/store/detail ... bsQAvD_BwE
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

User avatar
The dman
Member
Posts: 349
Joined: Wed Dec 15, 2010 5:13 pm
Contact:

Re: 8Pre Interface

Post by The dman » Mon Mar 12, 2018 1:30 pm

Suprawill1 wrote:
Mon Mar 12, 2018 3:15 am
The dman wrote:
Sun Mar 11, 2018 3:02 pm
I got a call from Sweetwater and they have them in stock and mine will be here Tuesday. I'll report back
Looking forward to your report.
I couldn't wait, mine needed to be replaced before their projection. I ended up going with the Roland Studio Capture.
It's also a great unit and I don't think I settled.

https://www.sweetwater.com/store/detail ... bsQAvD_BwE
I almost lost patience and jumped ship too but the Clarett tripped all the right triggers. What's weird is that I got a call from Sweetwater on Thursday telling me they won't be in until April 9th and then I got a call the next day telling me they had them and they were shipping. I will definitely report back
Cubase 8.5.15 x64 Windows 10 Home
ASUS P8Z68-V GEN3/ i72600k / G.SKILL Ripjaw (4 x 4GB)/SeaSonic X750 Gold PSU/ RME HDSP 9652 / UAD2Quad// Alphatrack/ Alesis HD24XR

http://www.woodstockschoolofmusic.com/

http://www.davedaltonmusic.com

PeppaPig
Member
Posts: 847
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: 8Pre Interface

Post by PeppaPig » Mon Mar 12, 2018 10:06 pm

Suprawill1 wrote:
Wed Feb 07, 2018 7:59 pm

Will def post results. According to Focusrite, the Usb is supposed to have identical latency as the TB.
In order to match (the latest) Thunderbolt - they are invariably talking about USB 3.1 or USB-C which IS Thunderbolt 3 slightly repackaged (and in some cases identical) if your PC has not got the latest (USB 3.1 (not 3) or USB-C) spec ports then it'll either not work - or it'll work at much-reduced speeds. So be careful with the use of the term USB!
Cubase Pro 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Golden Audio pre73 DLX, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 840 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Mon Mar 12, 2018 11:26 pm

PeppaPig wrote:
Mon Mar 12, 2018 10:06 pm
Suprawill1 wrote:
Wed Feb 07, 2018 7:59 pm

Will def post results. According to Focusrite, the Usb is supposed to have identical latency as the TB.
In order to match (the latest) Thunderbolt - they are invariably talking about USB 3.1 or USB-C which IS Thunderbolt 3 slightly repackaged (and in some cases identical) if your PC has not got the latest (USB 3.1 (not 3) or USB-C) spec ports then it'll either not work - or it'll work at much-reduced speeds. So be careful with the use of the term USB!
I have USB 3.1 but it does not come into play in this comparison. 3.1 has the same physical connection as TB but sonically is a different protocol so is not interchangeable. The Clarrett Pre is TB 2 so that is what the comparison boils down to.
As far as the latency factor that I mentioned, it all depends on who you speak to, even at Focusrite. One tech told me that the latency would be comparable between TB and USB and another told me there would be a slight difference but. The USB version is optimized for Windows and due to the fact that there were problems with the TB version and any Windows version including 10, the USB version seems to be a good choice.
I'm already getting a 1.7ms round trip latency with my 12 year old FW-1082 so I really can't go wrong with the USB 2.0 connectivity.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

PeppaPig
Member
Posts: 847
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: 8Pre Interface

Post by PeppaPig » Thu Mar 15, 2018 10:03 pm

"but sonically is a different protocol " What does that mean? Thunderbolt, USB - whatever are simply digital data connection and transmission protocols - they have absolutely zero influence on the sound.
Cubase Pro 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Golden Audio pre73 DLX, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 840 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Fri Mar 16, 2018 6:59 am

PeppaPig wrote:
Thu Mar 15, 2018 10:03 pm
"but sonically is a different protocol " What does that mean? Thunderbolt, USB - whatever are simply digital data connection and transmission protocols - they have absolutely zero influence on the sound.
Maybe I used the wrong terminology. The sound quality would be the same whether TB or USB but what would change would be the latency because TB will get you there faster.
PeppaPig wrote:
Thu Mar 15, 2018 10:03 pm
In order to match (the latest) Thunderbolt - they are invariably talking about USB 3.1 or USB-C which IS Thunderbolt 3 slightly repackaged (and in some cases identical)
This quote is what I was referring to when I mentioned TB 3 and USB 3.1 would not be identical in any case. They have the same physical connectivity but wouldn't work because the transmission protocol is different.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

PeppaPig
Member
Posts: 847
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: 8Pre Interface

Post by PeppaPig » Fri Mar 16, 2018 9:37 pm

What I meant is Focusrite must clearly be referring to the "thunderbolt3 variant" of USB when talking about USB latency matching Thunderbolt - ie they will be discussing USB3.1 or type C. Anyone with a USB 3.0 or older ports will be sorely disappointed/misled.
Cubase Pro 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Golden Audio pre73 DLX, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 840 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Sat Mar 17, 2018 7:52 am

PeppaPig wrote:
Fri Mar 16, 2018 9:37 pm
What I meant is Focusrite must clearly be referring to the "thunderbolt3 variant" of USB when talking about USB latency matching Thunderbolt - ie they will be discussing USB3.1 or type C. Anyone with a USB 3.0 or older ports will be sorely disappointed/misled.
Focusrite tech support was referring to their USB 2 version of the Clarrett 8Pre vs their TB 2 version of the Clarret 8Pre. Those are the only two versions of the 8Pre that they currently offer.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

PeppaPig
Member
Posts: 847
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: 8Pre Interface

Post by PeppaPig » Sat Mar 17, 2018 2:07 pm

I'm sure Focusrite will match the latency of OLD Thunderbolt, but I simply do not believe USB 2.0 connection can match Thunderbolt 3 or USB 3.1/C. It seems their interface is 2.0 regardless of the connection - all that aside I'm sure it's a cracking interface - I love the sound of most Focusrite pre's, this looks to be a fantastic bit of kit. I didn't struggle with USB 2.0 with my old UR44 so I know you can get acceptable performance - but that didn't have to shift eight channels' worth of data. At around £730 though - it would certainly been at the top of my shopping list if I were looking for an 8 pre USB audio interface.

From the Forcusrite website:
https://support.focusrite.com/hc/en-gb/ ... SB-C-port-

"Regardless of which connection you use, the Clarett USB interface will still operate and function as a USB 2.0 device and so performance will remain the same."
Cubase Pro 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Golden Audio pre73 DLX, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 840 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22

Suprawill1
Member
Posts: 872
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: 8Pre Interface

Post by Suprawill1 » Sat Mar 17, 2018 8:52 pm

Yes, it pretty much comes down to latency performance and as you compared your UR44, my old FW-1082 ran along side of this USB 2 performance.
It had 8 channels but was firewire connectivity. With that said, all mentioned can get down to 1.7ms latency which is very acceptable.
This Clarrett was scheduled for an April release so I opted for the Roland Studio Capture instead which has 16 channels, 12 Pre's, DSP, 'separate channel phantom pwr, phase, locut and auto-sensitivity' for the same price. Good sound and a lot of useful bells and whistles.
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 16G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 9 - Cubase Studio 5 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

Post Reply

Return to “Computer/Studio Hardware & Setup”

Who is online

Users browsing this forum: No registered users and 2 guests