Page 2 of 2

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Fri Apr 06, 2018 2:18 am
by TRNMTH
Hi everyone,

I work in a radio for the creation of documentary and fiction. Projects may be complex. Without the ripple edit, we do not advance in confidence. It is an indispensable tool. We use Sadie, and in this software there is the riplle edit in both directions, separate or simultaneous (this mode is great when it is added to a trim window... but this is another subject). If only Cubase had this option, it would perhaps avoid seeing too many people going to Reaper (and what a pity!).

Thanks for reading me.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Fri Apr 06, 2018 5:44 pm
by eddiemacarthur
Ripple editing can be a good thing. But, from my experience with my Vegas video editing package, if you forget that it is active it can totally ruin an edit. Obviously you have undo but if you don't notice straight away and do lots of things then realise things have moved from where they should be it can be nasty. Vegas allows ripple editing of selected track or all tracks. So I reckon that's what you need to add. It would also have to be a properly designed button that makes it obvious. Sadly, Cubase Gui is getting worse in that respect. Ed

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sun Apr 08, 2018 11:32 pm
by peakae
+1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon Apr 09, 2018 12:02 am
by uarte
eddiemacarthur wrote:
Fri Apr 06, 2018 5:44 pm
It would also have to be a properly designed button that makes it obvious.
Agreed 1000%

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Fri Apr 13, 2018 12:18 am
by galoz
+1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Fri Apr 27, 2018 7:32 pm
by Centralmusic
+ 1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon Apr 30, 2018 7:49 pm
by Turnicate99
Yes! +1

I switched to Reaper a short while ago after getting frustrated with some things on Cubase (GUI problem on Mac, and more), but I keep checking back to see what the status is, hoping I might be able to come back. The ripple feature in Reaper is stunningly great for fast and efficient work such as rippling the entire session including MIDI and all automation (without needing to open all automation then hide it that would require a lot of more steps, clicks, and selections in Cubase. It's incredible how much time this saves in the day for me on songs, and it would benefit so many users, even those who have never used it before in other DAWs/hadn't heard of it.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sun May 13, 2018 11:08 pm
by C9sus4
We all know that Shift + Double Click on part selects all parts to the right on that track.

I wish Steinberg could make, say:
1. Shift + A + Double Click for units to the right from the double clicked part/event ripple on all tracks.
2. Shift + you_name_it + Double Click for Selected Tracks Ripple.
3. Also, some blinking button to warn us to proceed with utmost caution because many units would be affected by edit (or parts/events colour change to 'ripple' colour; or all parts blinking in some jolly conspicuous way to signal us that all these units possess Ripple status).

WOULND'T IT BE WONDERFUL?????

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon May 14, 2018 6:06 am
by In_Stereo
C9sus4 wrote:
Sun May 13, 2018 11:08 pm
We all know that Shift + Double Click on part selects all parts to the right on that track.

I wish Steinberg could make, say:
1. Shift + A + Double Click for units to the right from the double clicked part/event ripple on all tracks.
2. Shift + you_name_it + Double Click for Selected Tracks Ripple.
3. Also, some blinking button to warn us to proceed with utmost caution because many units would be affected by edit (or parts/events colour change to 'ripple' colour; or all parts blinking in some jolly conspicuous way to signal us that all these units possess Ripple status).

WOULND'T IT BE WONDERFUL?????
Great idea for implementation. I would add that #1 should also move all automation data on every single track/channel (including groups, auxes, master, etc.) as well, otherwise it will all be out of synch with the rippled tracks.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon May 14, 2018 5:24 pm
by C9sus4
In_Stereo wrote:
Mon May 14, 2018 6:06 am

Great idea for implementation. I would add that #1 should also move all automation data on every single track/channel (including groups, auxes, master, etc.) as well, otherwise it will all be out of synch with the rippled tracks.
My friend, strike me hard if I'm wrong but methinks that automation data is attached to events/parts by default in Cubase/Nuendo. Therefore one should not worry about them at all.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon May 14, 2018 6:19 pm
by In_Stereo
C9sus4 wrote:
Mon May 14, 2018 5:24 pm
In_Stereo wrote:
Mon May 14, 2018 6:06 am

Great idea for implementation. I would add that #1 should also move all automation data on every single track/channel (including groups, auxes, master, etc.) as well, otherwise it will all be out of synch with the rippled tracks.
My friend, strike me hard if I'm wrong but methinks that automation data is attached to events/parts by default in Cubase/Nuendo. Therefore one should not worry about them at all.
Yes, totally - it is for the actual events/parts, but not for Groups, Sends, Master Faders, etc., which of course are crucial automation-wise.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Tue May 15, 2018 4:08 pm
by C9sus4
In_Stereo wrote:
Mon May 14, 2018 6:19 pm
Yes, totally - it is for the actual events/parts, but not for Groups, Sends, Master Faders, etc., which of course are crucial automation-wise.
True, true. All that stuff must ripple as well; those things should go without mentioning :)

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Wed Jun 13, 2018 11:23 am
by Centralmusic
I edit a lot of voice over stuff, and my biggggest wish is: that we get two nice little buttons that make it possible - like in Wavelab! - to move all events and gaps together PLUS markers (!)
"Ripple Edit" is a very fine and fast handling - without having to do any shortcuts or double clicks or similar "work arounds"...

Ripple Edit (like in Wavelab!) =

+ 1 !



:idea:



.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Thu Jun 21, 2018 9:31 pm
by In_Stereo
Centralmusic wrote:
Wed Jun 13, 2018 11:23 am
I edit a lot of voice over stuff, and my biggggest wish is: that we get two nice little buttons that make it possible - like in Wavelab! - to move all events and gaps together PLUS markers (!)
"Ripple Edit" is a very fine and fast handling - without having to do any shortcuts or double clicks or similar "work arounds"...

Ripple Edit (like in Wavelab!) =

+ 1 !



:idea:



.
I like this, yes! It's amazing how much time and fiddling around this would save/eliminate, saving very noticeable large amounts of time for anyone, especially those like me with composing sessions that have hundreds of tracks, tons of groups, sends, etc.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sat Aug 04, 2018 1:45 pm
by Centralmusic
In_Stereo wrote:
Thu Jun 21, 2018 9:31 pm

I like this, yes! It's amazing how much time and fiddling around this would save/eliminate, saving very noticeable large amounts of time for anyone, especially those like me with composing sessions that have hundreds of tracks, tons of groups, sends, etc.
absolutely! It would be immense time-saving for film music composers who works with tons of tracks and automations too.


.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sat Aug 18, 2018 10:45 am
by Centralmusic
P.S:
I would pay 540,- Euros again - if that feature would be integrated in Cubase X. :idea:

(no kiddin)




.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sun Aug 19, 2018 11:40 pm
by Tommy80
+1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sat Sep 08, 2018 7:53 pm
by okr
+1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Fri Sep 14, 2018 1:55 am
by ctothel
Wow, this would be amazing. Huge +1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon Sep 17, 2018 5:33 pm
by Starsprinkler
+1 for Ripple Edit.

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Thu Jan 31, 2019 8:00 am
by Tommy80
+1! This can be a time saver also for classical music editing

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Sun Apr 28, 2019 7:03 am
by WZK
+1

Re: Ripple Edit - for Events and Ranges (voice overs, podcasts e.g.)

Posted: Mon Aug 12, 2019 5:02 pm
by mitchiemasha
+1

I didn't know what this was but it would of helped me so many times.