bypass chain on output doesn't work properly

Use this forum for an overview of issues and to report new ones.
Post Reply
User avatar
nordlead26
Member
Posts: 275
Joined: Wed Mar 09, 2016 10:45 pm
Contact:

bypass chain on output doesn't work properly

Post by nordlead26 » Mon Oct 15, 2018 3:12 pm

bypass chain on output doesn't work properly, it can be turned off for all the chain, but if you re activate/turn on the chain, non of the plugins on the inserts are turned on, and you should click one by one to turn on
Cubase Pro 9.5.30 x64
Windows 10 x 64bit
Intel Core i7 860
20 GB RAM
audio interface MOTU 828 MKII

Martin.Jirsak
Forum Elder
Posts: 12946
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: bypass chain on output doesn't work properly

Post by Martin.Jirsak » Tue Oct 16, 2018 8:18 am

Hi,

I understand it this way:
1) Add some plug-ins to the Stereo Out Channel.
2) Bypass all Inserts of the Stereo Out (use the blue/yellow dot on top of the INSERTS slots name in the MixConsole).
3) Re-enable the Inserts of the Stereo Out (use the same controller).
=> The Inserts are bypassed instead of enabled.

Do I understand right your description? I can't reproduce it this way on my side. This works as expected here to me.
Martin Jirsak
http://www.cubase-training.com/EN/

Cubase Pro (last officially supported version all the time)
macOS (last update)

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest