[ISSUE] N 8.2 almost always crashes when closing a project.

Post general topics related to Nuendo 8 here.
Post Reply
In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

[ISSUE] N 8.2 almost always crashes when closing a project.

Post by In_Stereo » Thu May 31, 2018 12:24 am

This is a big one, for me: Every time I work on a C9.5 project in N8.2, it will crash (disappear) after I close the project. I hope this can be remedied very soon -- the exact same projects do not crash C9.5 when I close them. I haven't started a completely new project in N8.2 yet, so I can't say whether or not it would crash then, too. I'll hold off on buying until this gets remedied or someone can point to something that I can do to fix it (I did trash preferences).
Last edited by In_Stereo on Sun Jun 03, 2018 1:27 am, edited 1 time in total.
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: [ISSUE] N 8.2 always crashes when closing a Cubase project.

Post by In_Stereo » Sat Jun 02, 2018 12:03 am

Anyone else experiencing this? Everything is perfectly stable and great until I close a Cubase project loaded into Nuendo, then N 8.2 disappears. I'll start a shorter upcoming scoring project completely in Nuendo tomorrow see what happens.
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: [ISSUE] N 8.2 always crashes when closing a Cubase project.

Post by In_Stereo » Sun Jun 03, 2018 1:26 am

Drat -- happens with projects started fresh in N8.2 as well, with only a few plugins and no virtual instruments. Not when they're very small but as soon as I start adding more than a few tracks and the projects get bigger. I'll go back to Cubase (9.5.2) until this is remedied, unless there's something I can do about it -- I open and close projects tons of times every day so this is not workable for me. :-(

It doesn't look like others are experiencing this, unless those who are just aren't responding here. Cubase 9.5.2 never crashes when closing a project, so I'm not sure what I need to do to remedy it in Nuendo? Again, I tried trashing prefs, didn't help.
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

CHAOS
Junior Member
Posts: 72
Joined: Sat May 21, 2011 3:34 am
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by CHAOS » Mon Jun 04, 2018 8:21 am

I find it crashes a lot. Sometimes it will crash on loading too, forcing me to restart my computer, then loads fine. If I am not on the project very long, it closes, but if it has been running for over 30 minutes...crash every time. I found a slight improvement trashing prefs, but no fix for me as of yet. All my drivers are up to date as well. It seems not many people are having this issue, as to the lack of posts supporting this issue, so it is a quandary.
Tune out the humming, turn on the stereo...

Nuendo 7.035 Windows 10 Professional 64-bit CPUSkylake Core i7 (i7-6700, 4 cores/8 threads), 3.4GHz (4.0GHz Max Turbo)MotherboardIntel Z170 ChipsetGraphics/VideoEVGA NVidia GTX1060 6gb Maximum Resolution max 7680x4320@60Hz DP 1.43, HDMI 2.0b, Dual Link-DVI RAM Memory - Included48GB DDR4/2133 MHzMemory - Max64GB (4x16GB)Storage - IncludedSystem - 500GB M.2 Solid State Drive (SATA 6.0 Gb/s), 1 Hot Swap SATA Drive BayStorage - ExpandedAudio - 2 x 2TB Seagate Barracuda (SATA 6.0 Gb/s)

arve.furset
Junior Member
Posts: 57
Joined: Thu Sep 12, 2013 7:01 pm
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by arve.furset » Mon Jun 04, 2018 3:42 pm

I have to force quit both Nuendo and Cubase every time if I got heavy projects with many (Acustica and UAD) plugins active.

User avatar
Fredo
External Moderator
Posts: 2307
Joined: Tue Dec 14, 2010 11:20 am
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by Fredo » Mon Jun 04, 2018 4:09 pm

Crash on quit or failing to quit is pretty much always caused by drivers that aren't properly released.
Can be anything , midi device, USB whatever, UAD, Soundcard, ....
Be sure to always use the latest drivers.

Fredo

twelvetwelve
Member
Posts: 755
Joined: Wed Dec 15, 2010 9:35 pm
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by twelvetwelve » Mon Jun 04, 2018 6:25 pm

Crashing on close almost constantly here too. Latest drivers here (RME, no UAD).

In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by In_Stereo » Mon Jun 04, 2018 9:46 pm

Fredo wrote:
Mon Jun 04, 2018 4:09 pm
Crash on quit or failing to quit is pretty much always caused by drivers that aren't properly released.
Can be anything , midi device, USB whatever, UAD, Soundcard, ....
Be sure to always use the latest drivers.

Fredo
Thanks Fredo, I'll try that (I'm on Mac -- I remember my Windows days when the drivers meant so much for stability, but I know it can affect Macs too).
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by In_Stereo » Tue Jun 05, 2018 1:44 am

I updated every driver I could find on my Mac -- unfortunately Nuendo still crashes whenever I close a project. Any other ideas/suggestions? It's killing me!
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

+A_A+
New Member
Posts: 1
Joined: Fri Jun 08, 2018 7:42 am
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by +A_A+ » Fri Jun 08, 2018 7:51 am

Hi there, had the same problem on my mac. Sorry i haven't read the whole thread, but I disabled the hub and it seems to have stopped.

In_Stereo
Member
Posts: 892
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by In_Stereo » Fri Jun 08, 2018 4:19 pm

+A_A+ wrote:
Fri Jun 08, 2018 7:51 am
Hi there, had the same problem on my mac. Sorry i haven't read the whole thread, but I disabled the hub and it seems to have stopped.
Thanks, I will try that.
Cubase 9.5, Trashcan Mac 6-core 3.7ghz, Sierra 10.12.1 OS, AMD FirePro D300 Dual, 64 gig RAM, plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

Stevie54
New Member
Posts: 40
Joined: Fri Dec 17, 2010 9:17 am
Contact:

Re: [ISSUE] N 8.2 almost always crashes when closing a project.

Post by Stevie54 » Sat Jun 09, 2018 12:10 pm

same here on 3 different DAWs & hardware configs.
For some reason it depends on how long a session is open for it to crash
or not when closing.
s.
Sys 1+2=Intel Core i7-4930K - W10 - RME 9652 - UAD2 - N8.2
Sys 3+4=Intel Core i7-3930K-W10-RMEBabyface-UAD2 - N8.2

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests