Page 2 of 4

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 2:23 am
by raino
SF_Green wrote:
Wed Apr 17, 2019 11:29 pm
Non-FB person here.
Cheers
Likewise. +1

I do not trust the Zuck (who's SF house is on my street a block uphill - the important distinction "uphill" means a lot in these parts).

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 10:06 am
by silhouette
cmbourget wrote:
Wed Apr 17, 2019 10:03 pm
I tried again to adapt to this new interface. Nothing to do. What sadness ... We had a nice interface with 9.5., Not perfect, a little rough (big lines began, after the names of bold and big faders), but correct. Now it's the ugliest interface in the market. Such a waste ! When we think that Dorico's interface is so professional ... Goodbye Steinberg. You had a chance to match Pro Tools first. Chance spoiled by the designers.
Everyone will have their our point of view. Me? I like it and have customised my screens to help my workflow. (I use 3 monitors) I am not sure that I would characterise it as ugly.

The update has worked perfectly for me with many welcome changes and repairs.

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 1:15 pm
by Prock
raino wrote:
Thu Apr 18, 2019 2:16 am
dman2014 wrote:
Wed Apr 17, 2019 8:36 pm
Only thing I've noticed since installing this on my system is that Cubase now always asks whether I want to save or not on exit, even after saving the project just before. That's a bit annoying, but rattles confidence as to why it's happening.
That has been intermittently happening to me for years now. Cubase sometimes thinks changes have occurred since saving & other times knows no changes have occurred. No pattern about when it does this that I can tell.
+1 what raino said. Same for me. Weird.

Regards. 8-)

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 3:55 pm
by cubace
So, still no fix for the sample rate conversion artifacts that Steinberg claims was fixed in 10.0.0?

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 7:42 pm
by Sonik
cubace wrote:
Thu Apr 18, 2019 3:55 pm
So, still no fix for the sample rate conversion artifacts that Steinberg claims was fixed in 10.0.0?
What's the problem you have?

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 7:44 pm
by dman2014
I found that the culprit in my case is Padshop. Whenever I use Padshop, Cubase 10 now always asks whether I want to save or not on exit, even after saving the project just before.

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 8:43 pm
by dman2014
A bunch of different plug-ins also no longer render correctly within Cubase. Get half a UI then a blank white space.

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 10:25 pm
by reberclark
Flawless update. Thank you.

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 10:39 pm
by -steve-
thermionic wrote:
Wed Apr 17, 2019 3:50 pm
I'm getting an installation error message:
"An installation package for the product Steinberg Library
Manager cannot be found. Try the installation again using a valid
copy of the installation package Steinberg Cubase Update"
I haven't moved or deleted any files and my e-Licenser is up-to-date, I have downloaded the update from both the Cubase forum and also the Download Manager. This is the first problem I've ever had with Cubase updates but my charmed life has come to an end :D Any ideas? Thanks in advance.
Reinstall the Download Manager, if that doesn't work, try this Microsoft utility: https://support.microsoft.com/help/1758 ... or-removed

Re: Cubase 10.0.20 maintenance update

Posted: Thu Apr 18, 2019 11:38 pm
by Sonik
Does the Pre and post roll works good on this version?

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 2:53 am
by In_Stereo
There are a few welcome fixes and there are also many longstanding issues that I feel might never get fixed at this point. I'm thankful for the fixes and also highly frustrated by the large amount of longtime continuing issues. Highly frustrated longtime user here, and clearly venting on here does nothing, but I keep doing it. :-D

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 9:29 am
by Magnus_N
Just a short thank you for a fine update of an extraordinary daw.

/Magnus

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 9:56 am
by Dave Peppiatt
Still no fix for long track names in the mixer wrapping to 2 lines on Windows 10 :cry:
Well... I guess I'll start looking forward to the next update and hope this problem gets fixed.

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 11:53 am
by nikhollis
Dave Peppiatt wrote:
Fri Apr 19, 2019 9:56 am
Still no fix for long track names in the mixer wrapping to 2 lines on Windows 10 :cry:
Well... I guess I'll start looking forward to the next update and hope this problem gets fixed.
+1

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 5:51 pm
by micantino
Doctor Lupo wrote:
Thu Apr 18, 2019 1:47 am
Steve Helstrip wrote:
Wed Apr 17, 2019 10:50 pm
I was really hoping to have our toolbox back over 2 lines. Will this ever happen? Or is this a permanent change that NO ONE asked for?
Plus 1
+1
and resize option for Transport Bar too, please.

Re: Cubase 10.0.20 maintenance update

Posted: Fri Apr 19, 2019 8:12 pm
by SF_Green
raino wrote:
Thu Apr 18, 2019 2:23 am
SF_Green wrote:
Wed Apr 17, 2019 11:29 pm
Non-FB person here.
Cheers
Likewise. +1

I do not trust the Zuck (who's SF house is on my street a block uphill - the important distinction "uphill" means a lot in these parts).
We're practically neighbors then. I live just off Alamo Square.

Re: Cubase 10.0.20 maintenance update

Posted: Sat Apr 20, 2019 12:42 am
by prolik
Works like a charm :)
I recently opened project in Cubase 9.5 due to some incompatible plugin issues with 10 (grrrr) but..
I can never go back as CS 10 feels so much smoother and crisper. Good job Steinberg! :)

Re: Cubase 10.0.20 maintenance update

Posted: Sat Apr 20, 2019 4:08 am
by Anthonie
Steve Helstrip wrote:
Wed Apr 17, 2019 10:50 pm
I was really hoping to have our toolbox back over 2 lines. Will this ever happen? Or is this a permanent change that NO ONE asked for?
+1
I won't be using Cubase 10 until the resizable Toolbox is back (less mouse movement).
Btw I suppose you mean 2 Tool lines with each 6 Tools plus under that the Color Tool.

Re: Cubase 10.0.20 maintenance update

Posted: Sat Apr 20, 2019 9:32 am
by cubace
Sonik wrote:
Thu Apr 18, 2019 7:42 pm
cubace wrote:
Thu Apr 18, 2019 3:55 pm
So, still no fix for the sample rate conversion artifacts that Steinberg claims was fixed in 10.0.0?
What's the problem you have?
None. It looks like it fixed, but I cant find it in release notes.

Re: Cubase 10.0.20 maintenance update

Posted: Sat Apr 20, 2019 5:08 pm
by beatpete
dman2014 wrote:
Thu Apr 18, 2019 8:43 pm
A bunch of different plug-ins also no longer render correctly within Cubase. Get half a UI then a blank white space.
Me too!

Re: Cubase 10.0.20 maintenance update

Posted: Sun Apr 21, 2019 1:11 am
by SpicyPonyHead
"Move to origin" is back in the right-click menu, where it belongs!

One down, 37 more to go haha!

Re: Cubase 10.0.20 maintenance update

Posted: Sun Apr 21, 2019 1:01 pm
by blackfor3st
Why for the love of god did you @ steinberg NOT fixed the one thing I (and probably a few more) was hoping to be resolved in this update? Hdpi-setting is STILL useless unless you have the vision of a hawk. I'm most certain 95% of all user have the ~125-150% screen resolution, and cubase still only take 100% or 200%, which *knuf* up vst's and whatnot. I've waited for this update to fix this as I've spent a few hard earned dollars on this program. But no. Gimme ONE good reason not to swich to studio one, or live, to enjoy the fresh looks of the 21'st century?

What the hell is wrong with you?

Re: Cubase 10.0.20 maintenance update

Posted: Sun Apr 21, 2019 3:33 pm
by mitchiemasha
New fade editor was a surprise... Not sure i like it!

Re: Cubase 10.0.20 maintenance update

Posted: Sun Apr 21, 2019 4:03 pm
by SJH
Warp Marker colour in Sample Editor Free Warp seems back-to-front... used to be nice and visible bright orange line when working with warp markers. Now, when I switch on Free Warp they switch to a dull grey which is barely discernible from the bar and beat division markers. Keeps catching me out when I think I've anchored a phrase only to find it was the bar marker.

Anyone know if it's possible to restore the old orange marker colour? Can't find anything under Preferences.

Re: Cubase 10.0.20 maintenance update

Posted: Sun Apr 21, 2019 5:08 pm
by SpicyPonyHead
blackfor3st wrote:
Sun Apr 21, 2019 1:01 pm
Why for the love of god did you @ steinberg NOT fixed the one thing I (and probably a few more) was hoping to be resolved in this update? Hdpi-setting is STILL useless unless you have the vision of a hawk. I'm most certain 95% of all user have the ~125-150% screen resolution, and cubase still only take 100% or 200%, which *knuf* up vst's and whatnot. I've waited for this update to fix this as I've spent a few hard earned dollars on this program. But no. Gimme ONE good reason not to swich to studio one, or live, to enjoy the fresh looks of the 21'st century?

What the hell is wrong with you?
Depends on what screen size you're using - my primary display is 49" 4k, and HiDPI @ 100% is perfect for it.