Clip/Part/event Gain Automation

All feature requests and suggestions for upcoming releases of Cubase Pro 10, Cubase Artist 10 and Cubase Elements 10 can be posted here.
Post Reply
User avatar
mozizo
Senior Member
Posts: 1770
Joined: Fri Jan 28, 2011 10:48 pm
Contact:

Clip/Part/event Gain Automation

Post by mozizo »

Hi.
I think cubendo can benefit from Clip gain automation as in protools.
not need to cut every audio part just to adjust gain like in cubendo, good workflow :idea:
cubase 10.5 pro ,halion 6 GA5 HS2,HSO,Dark planet,neosoul keys.
Sony vaioF13 i7 CPU win10 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro

User avatar
Prock
Grand Senior Member
Posts: 3970
Joined: Sat Jan 05, 2013 4:22 pm
Location: Connecticut, USA
Contact:

Re: Clip/Part/event Gain Automation

Post by Prock »

Thought...

Maybe the "Trim" automation function is what you want. It is available in CB Pro.

Regards 8-)
PRock Studio

DAW: Cubase Pro 10.5.20, OS: Win 10 Pro x64, CPU: Intel Core i7 4700K @ 4.0GHz, RAM: 32GB/DDR4/2800MHz, Graphics: 4GB GeForce GTX 960, Mobo: MSI Z170A Gaming Pro Carbon, AI: PreSonus Studio 192 Mobile, Mic Preamp: PreSonus TubePre, Headphone Amp: PreSonus HP4, Studio Monitors: Mackie MR5, 3rd Party VSTs: GSi VB3-II, SampleTank 3, Amplitube 4, Miroslav Philharmonik 2, EZDrummer 2

https://soundcloud.com/prockstudio

User avatar
mozizo
Senior Member
Posts: 1770
Joined: Fri Jan 28, 2011 10:48 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by mozizo »

nop, its different
its like automation for the event itself(on the wave level) not the audio track.
its can be done maybe with automating some gain plugin on the track insert,but its less intuitive and does not give you visual real time change of the wave level
also can be done with DOP with gain process,but again its not the same :ugeek:
cubase 10.5 pro ,halion 6 GA5 HS2,HSO,Dark planet,neosoul keys.
Sony vaioF13 i7 CPU win10 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro

User avatar
Starsprinkler
Member
Posts: 354
Joined: Sat Dec 29, 2012 2:35 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by Starsprinkler »

+1

Another little good workflow improvement.

Just range and drag - done!
No cutting, and then gluing, is needed.

As Pro Tools in this illustrative gif anim (a bit into it, after the insert/send/vol/pan thing):
https://gifyu.com/image/vEaT
Last edited by Starsprinkler on Fri Nov 29, 2019 4:00 pm, edited 1 time in total.

Tomek
Junior Member
Posts: 87
Joined: Fri Jun 07, 2013 8:15 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by Tomek »

just simple and elegant, no need to cut clip like in Cubase

this was huge impact on protools users workflow, try once and you never look back again
https://drive.google.com/open?id=19lnVY ... Gxqdjgr8OB
hMac i9, Mojave, Cubase Pro 10.5, PT2019U, Apogee Ensemble TB

wagzy
New Member
Posts: 46
Joined: Mon Jan 30, 2012 11:43 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by wagzy »

Tomek wrote:
Thu Nov 28, 2019 11:51 pm
just simple and elegant, no need to cut clip like in Cubase

this was huge impact on protools users workflow, try once and you never look back again
https://drive.google.com/open?id=19lnVY ... Gxqdjgr8OB
Starsprinkler wrote:
Wed Nov 20, 2019 12:33 am
+1

Another little good workflow improvement.

Just range and drag - done!
No cutting, and then gluing, is needed.

As Pro Tools in this illustrative gif anim (a bit into it, after the insert/send/vol/pan thing):
https://gifyu.com/image/vEaT
mozizo wrote:
Mon May 06, 2019 1:56 pm
Hi.
I think cubendo can benefit from Clip gain automation as in protools.
not need to cut every audio part just to adjust gain like in cubendo, good workflow :idea:

Cubase should have these AWESOME FEATURES. I spent so much time last night splitting, crossfading and dragging handles. If I had these tools, I would have saved so much time. I'll trade any and every one of the synths that I paid for (with Cubase) for these highly valuable features!

+3 !!!
Win10 Pro x64 Version 10.0.18362 Build 18362; Core i7 x990 @3.47 GHz and 3.46 GHz;24GB RAM; Motherboard: Gigabyte Tech. X58A-UD3R; Samsung 850 EVO 1TB 2.5-Inch SATA III Internal SSD x2 (system and audio); Caviar Black 1TB for samples HD; Nvidia GeForce GTX 770; Cubase 10.0.5 Pro Build 301; Lynx AES16 2.00 Build 23j

In_Stereo
Senior Member
Posts: 1533
Joined: Wed Oct 12, 2016 6:21 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by In_Stereo »

+1

Yes, indeed. Another workflow feature that would speed things up in Cubase in a significant way for everyone.
Latest Cubase 10.5, Windows 10 Pro 64-bit, i9 10920x 12-core 4.8gHz, 128 gigs RAM, AMD RX-550 , plugins galore, some hardware, a bunch of real instruments and synths, Apollo 8 TB, etc., etc., and two cats

User avatar
mozizo
Senior Member
Posts: 1770
Joined: Fri Jan 28, 2011 10:48 pm
Contact:

Re: Clip/Part/event Gain Automation

Post by mozizo »

https://www.youtube.com/watch?v=WZVbb7Uz9gI
that's what it should be like,, S1 developers know how to make tools with workflow ease in mind
pencil tool in cubase is so old and not intuitive an slow for today's production demands,hope it makes in cubase 11,or at least they think about it at all in near future updates
cubase 10.5 pro ,halion 6 GA5 HS2,HSO,Dark planet,neosoul keys.
Sony vaioF13 i7 CPU win10 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro

Post Reply

Return to “Feature Requests and Suggestions”

Who is online

Users browsing this forum: fasec and 3 guests