Panning Bug

Use this forum for an overview of issues and to report new ones.
Post Reply
SeanRoss
New Member
Posts: 3
Joined: Sun Feb 11, 2018 6:18 am
Contact:

Panning Bug

Post by SeanRoss » Thu Jan 02, 2020 7:52 am

I'm using 10.0.50 Cubase 10.

This seems to happen on every channel.

Hard left panning does not work. Hard right behaves as it should—no audio from the left monitor. The stereo out meters display correctly when I pan hard left, but I can hear audio in both left and right monitors. I've checked multiple audio interfaces, with identical results. It's an obvious bug, and I have 20 songs waiting to be mixed down properly.

User avatar
Stephen57
Senior Member
Posts: 1799
Joined: Sat May 30, 2015 5:32 pm
Location: New York, NY
Contact:

Re: Panning Bug

Post by Stephen57 » Fri Jan 03, 2020 12:05 am

Hi,

Welcome to the forums.

This sounds odd and my guess is there's something not right with routing, track/bus configuration or the Audio interface.

Here's what I suggest.

1. Create empty project.
2. Create one Instrument track and load a relatively non-complex sound -- basic piano patch, etc.
3. Create a very simple part with long-tone chords.
4. Check pan on that.

If that works then something else is wrong. I'm on Cubase Pro 10.0.4 so if this is a new issue with 10.0.05 I can't address that.

Lastly, it would be helpful if you put some information about your set-up in your "signature?" This will help others on the forum answer your question.

Good luck.
-------------------------------------------------------
DAW: Cubase Pro 10 (Main), Cubase Pro 9.5 (Backup); PC: HP Z230, i5 CPU quad-core 3.5 Ghz, 16 Gigs RAM; OS: Win 7 Pro 64-bit; Audio Converters, Scarlett 2I4, Zoom UCR-8; USB MIDI Controller, Akai Advance 49. VST-Is: Spectrasonics Omnisphere 2.5, Stylus RMX; Air Music: Hybrid, Transfuser 2, Vacuum Pro, Velvet, Xpand2; Novation: Bass Station; Sonovox Grand Piano; Rack: Proteus 2000, Korg 03R/W, Yamaha TG 33. Monitoring with KRK Rokit 8/G3, Tannoy PBM 6.5 II, Mics. Scheops, Sennheiser, Rode, Lectrosonics RF, etc.

Help with Cubase:
Documentation: https://steinberg.help/
Location/file paths of presets in Cubase and Nuendo: https://helpcenter.steinberg.de/hc/en-u ... nd-Nuendo-
Preferences: https://helpcenter.steinberg.de/hc/en-u ... and-Nuendo

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 5 guests