Mix Console Scrolling Not Working

Post general topics related to Nuendo 10 here.
Post Reply
cybermix
New Member
Posts: 8
Joined: Thu Mar 14, 2013 5:33 pm
Contact:

Mix Console Scrolling Not Working

Post by cybermix » Fri May 03, 2019 4:56 am

When using 40 channels the scrollbar tool under the faders or the left and right arrows in Mix Console will not scroll through the channels. If I use Mix Console 2 or the Project Window Mix Console, I can use the scroll bar tool under the faders or the left and right arrows just fine. Any help would be appreciated.

Graveley
Junior Member
Posts: 130
Joined: Sun Jan 21, 2018 9:30 am
Contact:

Re: Mix Console Scrolling Not Working

Post by Graveley » Fri May 03, 2019 3:19 pm

Check that you haven’t selected a lot of channels to be docked on the right side of the mixer. They don’t scroll.
N10 Windows 7

cybermix
New Member
Posts: 8
Joined: Thu Mar 14, 2013 5:33 pm
Contact:

Re: Mix Console Scrolling Not Working

Post by cybermix » Fri May 03, 2019 5:22 pm

"Check that you haven’t selected a lot of channels to be docked on the right side of the mixer. They don’t scroll."

That was not the problem but it got me looking in the right direction.

If I make all of the Visible channels Zoned to the middle selection = "Default Channel Position" vs. "Attach Channel to the Left Edge" as I had them, then I can scroll through the channels and it works as it should.

Thanks for the tip.

cybermix
New Member
Posts: 8
Joined: Thu Mar 14, 2013 5:33 pm
Contact:

Re: Mix Console Scrolling Not Working Fixed

Post by cybermix » Fri May 03, 2019 5:24 pm

Thanks for the tips.

Graveley
Junior Member
Posts: 130
Joined: Sun Jan 21, 2018 9:30 am
Contact:

Re: Mix Console Scrolling Not Working

Post by Graveley » Fri May 03, 2019 6:04 pm

👍
N10 Windows 7

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 3 guests