PT Control App Still Causing Crashes From Track Selection Page

Post general topics related to Nuendo 10 here.
Post Reply
User avatar
Keyplayer
Senior Member
Posts: 1167
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

PT Control App Still Causing Crashes From Track Selection Page

Post by Keyplayer » Tue May 07, 2019 6:00 pm

If you're using PT Control app, with or without the other Artist Series hardware, be advised that selecting the tracks button will cause Eucon and Nuendo to totally crash! You can use the App for any other section EXCEPT track select! :roll: :cry: :x
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i7 - 5820K CPU @ 3.30 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

misjavw
Junior Member
Posts: 74
Joined: Mon Nov 05, 2012 3:57 pm
Location: Hilversum, The Netherlands
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by misjavw » Wed May 08, 2019 10:24 am

Tip: I've been using the (free) TouchOSC app to create custom controls, buttons etc for Nuendo for a few years now. Okay, it takes some time to program it (using the Generic Remote), but it works like a charm!!

McSound
Junior Member
Posts: 117
Joined: Sat Oct 06, 2018 11:48 pm
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by McSound » Fri May 10, 2019 5:38 pm

All works in here but only for stereo or 5.1 tracks. Nuendo and Eucon crash only when making a mono track routed to 5.1 output.
Nuendo 10.1 , Samplitude ProX4, Win 10x64 pro, i7, 16Gb, 256SSD, Gigabyte GTX 760, Blackmagic DeckLink Mini Monitor, Presonus VSL1818, 2 monitors, 1 TV, Avid Artist Control v2, Liine Lemur, Yamaha MOX8 keyboard

User avatar
Keyplayer
Senior Member
Posts: 1167
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by Keyplayer » Sat May 11, 2019 5:44 pm

McSound wrote:
Fri May 10, 2019 5:38 pm
All works in here but only for stereo or 5.1 tracks. Nuendo and Eucon crash only when making a mono track routed to 5.1 output.
I'm talking about a bug that makes any version of Nuendo crash when you SELECT the tracks page on the PT app on iPads.
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i7 - 5820K CPU @ 3.30 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

McSound
Junior Member
Posts: 117
Joined: Sat Oct 06, 2018 11:48 pm
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by McSound » Sat May 11, 2019 6:39 pm

Sorry, yes it crashes, but...strange...after crashing I opened empty project with several mono tracks, open pt app and it works, Tracks page works as expected, switching tracks, muting it and etc. Tried to load some wavs - works. Tried to add stereo tracks - connection's lost. Open pt app again - it's ok again, Tracks page works! So I'd like to know what makes it crashed? Ipad3l, eucon v19.5.0.514, nuendo 8.3.20.
Nuendo 10.1 , Samplitude ProX4, Win 10x64 pro, i7, 16Gb, 256SSD, Gigabyte GTX 760, Blackmagic DeckLink Mini Monitor, Presonus VSL1818, 2 monitors, 1 TV, Avid Artist Control v2, Liine Lemur, Yamaha MOX8 keyboard

User avatar
Keyplayer
Senior Member
Posts: 1167
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by Keyplayer » Tue May 14, 2019 2:55 am

McSound wrote:
Sat May 11, 2019 6:39 pm
Sorry, yes it crashes, but...strange...after crashing I opened empty project with several mono tracks, open pt app and it works, Tracks page works as expected, switching tracks, muting it and etc. Tried to load some wavs - works. Tried to add stereo tracks - connection's lost. Open pt app again - it's ok again, Tracks page works! So I'd like to know what makes it crashed? Ipad3l, eucon v19.5.0.514, nuendo 8.3.20.
I would also love to know what EXACTLY causes this crash. I'm still on Eucon v18.3. From what I'm reading over at the Avid Forum, 19.5 is a nightmare!
http://duc.avid.com/showthread.php?t=404596
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i7 - 5820K CPU @ 3.30 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

User avatar
Keyplayer
Senior Member
Posts: 1167
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

Re: PT Control App Still Causing Crashes From Track Selection Page

Post by Keyplayer » Tue May 14, 2019 3:20 am

McSound wrote:
Sat May 11, 2019 6:39 pm
Sorry, yes it crashes, but...strange...after crashing I opened empty project with several mono tracks, open pt app and it works, Tracks page works as expected, switching tracks, muting it and etc. Tried to load some wavs - works. Tried to add stereo tracks - connection's lost. Open pt app again - it's ok again, Tracks page works! So I'd like to know what makes it crashed? Ipad3l, eucon v19.5.0.514, nuendo 8.3.20.
I just tried your test. I opened an empty project with 24 mono tracks and 16 stereo. As soon as I touched the 1st track, after opening the tracks page in PT Control, Nuendo crashed with that "Exceeded Track Limitation" error message. :cry: This is with Eucon 3.6.1 with Eucon WS Unified 18.3.0.244.

As I mentioned earlier, everything else works just fine and, as getting back to 18.3 is VERY DIFFICULT (once you update the firmware and go to 19.5, which appears to be buggy as hell) if it doesn't work out, I'm not willing to risk changing anything. It's easier to just pretend that the Tracks page doesn't exist and just use all of my other methods to navigate to tracks. I have wasted enough of my life trying to get things stable and functional. Now, I JUST WANT TO WORK!

IF you figure out how to make it stop crashing, without giving up any of the other functions, let us know. ;)
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i7 - 5820K CPU @ 3.30 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests