Please, please, please update the CC121 driver

All about Steinberg's Advanced Integration Controller CC121.
pwmspeed
New Member
Posts: 38
Joined: Tue Dec 28, 2010 1:44 pm
Contact:

Please, please, please update the CC121 driver

Post by pwmspeed » Wed Sep 28, 2011 6:02 pm

After a long long time without update for the CC121 (altough many here want it) ---- any clues if there will ever be an update for the controller? Its bascially an option to flip the Q and the G knob so that they finally (after years) match the software. And how about that requested more analog (or evern custom) scaleing feel of the frequency knob.

If i was a programmer i would really do it on my own. i actually already asked around. the Q and G knob flip is prolly a 5 minute programming job. i can't understand why Steinberg does not care about the CC121 users.

.... btw: i have NEVER really used the EQ sections since they are so ... ehm.. un-analog to use. and the Q and G flip is just a nightmare!
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.

misnoma
Junior Member
Posts: 80
Joined: Sun Jan 02, 2011 11:00 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by misnoma » Tue Oct 04, 2011 12:10 am

+1
Cubase Pro 10, Windows10. RME 9632.

User avatar
Benutzername
Junior Member
Posts: 115
Joined: Sun Jan 02, 2011 1:54 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Benutzername » Tue Oct 04, 2011 8:54 am

+1

It is a bit odd that a reaper user can adjust the encoder rotation speed and acceleration but the inventors of the device can't.

User avatar
Strophoid
Grand Senior Member
Posts: 4648
Joined: Sun Dec 26, 2010 2:56 pm
Location: The Netherlands
Contact:

Re: Please, please, please update the CC121 driver

Post by Strophoid » Tue Oct 04, 2011 8:40 pm

+1
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.

My humble contributions to what could be considered music.

User avatar
Sunshy
Member
Posts: 741
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Sun Oct 16, 2011 2:09 am

Benutzername wrote:+1

It is a bit odd that a reaper user can adjust the encoder rotation speed and acceleration but the inventors of the device can't.
Is this true?! Can you provide a link to where this is possible? If this is true, it's truly sad.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

User avatar
Benutzername
Junior Member
Posts: 115
Joined: Sun Jan 02, 2011 1:54 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Benutzername » Sun Oct 16, 2011 1:32 pm

The CC121 support is a community contribution to the reaper landscape so there is a dedicated thread with the development progress over at the reaper forum. I can not post a direct link to the forum because Steinberg's webmaster censors the company name here on this forum (even in URLs). But this extension has a dedicated project page as well (here)

User avatar
Strophoid
Grand Senior Member
Posts: 4648
Joined: Sun Dec 26, 2010 2:56 pm
Location: The Netherlands
Contact:

Re: Please, please, please update the CC121 driver

Post by Strophoid » Sun Oct 16, 2011 2:11 pm

Oh wow, that looks like a great effort.
Drool at this:
These enhancements go beyond the original functionality that the device provides under Cubase but I found them very handy when working with the CC121:

1. Pressing the mute and the monitor button at the same time will swap the functionality of the volume fader and the pan encoder so the fader will control the panorama of a channel and the encoder will control the volume. This will make the automation of pan data much easier.

2. Pressing the write and the VSTi button at the same time will disable and enable the motorfader. This is usefull in many recording and mixing situations where the sound of the moving fader is disturbing. This shortcut is much easier as plugging the wall wart in and out every time to shut up the fader.
Come on Steinberg, Reaper can now use the cc121 better than Cubase, fix that!
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.

My humble contributions to what could be considered music.

pwmspeed
New Member
Posts: 38
Joined: Tue Dec 28, 2010 1:44 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by pwmspeed » Tue Oct 18, 2011 1:01 pm

damn.. i am on a mac.
HELLO Steinberg, anybody there?!?
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.

User avatar
Sunshy
Member
Posts: 741
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Tue Oct 18, 2011 9:28 pm

Pwned indeed. Though with the new controllers, I'm not sure this is a priority. Just wish they'd change:

1. Swap F&Q
2. Enable Function LEDs when user programmed
3. Adjust rotary resolution
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

DrWashington
Junior Member
Posts: 69
Joined: Fri Feb 04, 2011 8:23 am
Contact:

Re: Please, please, please update the CC121 driver

Post by DrWashington » Sat Oct 29, 2011 10:44 pm

+1!

Also, the ability to reprogram the functions of some of the buttons would be marvelous. For instance, if you could set the |< button to go to the left locator, this would make WORLDS more sense than the random *flower* it does now!

Seriously, Steinberg! Don't leave us hanging! This is a solidly built, pretty controller! It's a shame that very little about it really entices me to use it as it currently stands.

Also, the ability to lock it to a track while going back into the arrange window to play around with a softsynth would be fundamental to improving the actual, day-to-day usability of this thing! I've had it for about 9 months now, and I'm finding I hardly ever use the damn thing... this could be easily rectified! My favorite button, and the only one I tend to use all that often, is the instrument GUI open/close (the panel-looking) button.

Allow us to make some sensible customizations to this. PLEASE!! Do the right thing, don't let us down! Yamaha? Hello? SOMEBODY?! Please respond!!! :cry:
Win10x64, Intel Core i7 5960x @ 4.2GHz, 32GB DDR 4, Asus Rampage V Extreme, Samsung 1TB SSD for OS + 6TB RAID 10 + 5TB RAID 1, BD-RE, GeForce 780 Ti (4 monitors), RME Fireface UC, EVE SC208s.

misnoma
Junior Member
Posts: 80
Joined: Sun Jan 02, 2011 11:00 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by misnoma » Thu Nov 17, 2011 4:57 pm

Please Steinberg, dedicate some resource to software enhancement for the CC121? thanks.
Cubase Pro 10, Windows10. RME 9632.

paulito
Junior Member
Posts: 62
Joined: Thu Dec 16, 2010 1:08 am
Contact:

Re: Please, please, please update the CC121 driver

Post by paulito » Fri Nov 18, 2011 9:44 pm

bump
Cubase 7 - Macbook Pro i5, 8GB Ram -MacOS 10.8.2 - Yamaha n12 - CC121 - Lot's of Plugins -

pwmspeed
New Member
Posts: 38
Joined: Tue Dec 28, 2010 1:44 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by pwmspeed » Tue Dec 06, 2011 12:34 pm

i guess all these shouts are hopeless and it seems to be that the forum here is un-monitored by steinberg. there was never any feedback on the cc121 requests... :-((((
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.

User avatar
Marsman
Member
Posts: 273
Joined: Thu Dec 16, 2010 12:03 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Marsman » Tue Dec 06, 2011 11:00 pm

+1

but I doubt anyone is coming down here to this section of the forum the check for our feedback...
Nuendo 7 x64 + NEK, Windows 8.1 Professional x64
RME HDSP 9652, Dual Xeon 8-Core, Intel Chipset MB, Special Skills: Vanishing/Mind Manipulation

User avatar
Sunshy
Member
Posts: 741
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Thu Dec 08, 2011 7:28 am

I think it's pretty obvious that, with the new controllers out, the 121 is forgotten about. Nonetheless, I love mine and prefer it over the new controllers.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

dxm2
New Member
Posts: 19
Joined: Mon Apr 18, 2011 3:27 am
Contact:

Re: Please, please, please update the CC121 driver

Post by dxm2 » Mon Dec 19, 2011 5:23 am

If the CC121 has been forgotten about, that is a real shame. I've had mine for about 2 months and now am completely dependent on it. Its sped up both my tracking and my mixing. I think a reverse feature for the button LEDs would be great, i.e. that they would be lit until in use. With the new controllers, I doubt they will come out with a new hardware version, but an updated driver, with the suggestions in this forum topic, would be great. Next purchase for me is the MR816 CSX.
Angry Elf Music, Mac Book Pro, OSX 10.8.5 C7.0.06 and more guitars than sense!

User avatar
Elektrobolt
Senior Member
Posts: 1334
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Contact:

Re: Please, please, please update the CC121 driver

Post by Elektrobolt » Wed Jan 04, 2012 8:55 pm

It has not been forgotten about. Just because some owns a device and something is thought of as odd, strange or unbelivable, does not warrant that device to be immediately in the spotlight.

If one pays attention to the releases of Steinberg software (which, after using Steinberg stuff for almost 30 years, is hard not to :) it's evident that the software teams are relatively small and that products are mostly being worked on in turn. Anything CC121 deemed (by Steinberg/Yamaha) necessary to be worked on, certainly will be and eventually released.

Oh BTW, in my opinion the CC121 is a very unique, one-of-its-kind sort of a device, that makes life so much easier and the desk less cluttered. I even think it's making me permanently ambidextrous... :) Outstanding left hand device!!!
"Remember that we live only in the present, in this fleeting instant; all the rest of our life is either past and gone, or not yet revealed."

User avatar
Sunshy
Member
Posts: 741
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Mon Jan 09, 2012 6:49 pm

I love my CC121 and I wish more resources could be dedicated to it. But realistically, with the new controllers out, Steinberg has decided to go the modular route instead of an "all in one" unit. For this reason, I do think the 121 has been left behind. Having said that, let's not forget that Steiny brought the Midex units back to life by writing new drivers last year. Nice surprise for those owners.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

snakenewton
New Member
Posts: 11
Joined: Wed May 25, 2011 11:28 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by snakenewton » Sun Jan 15, 2012 11:53 am

I think its a disgrace that the G & Q are upside down - it must be such an easy fix in software to make this happen the other way up - ive posted on this before but to no avail; I come back here from time to time to check on any progress. there never is any. Hand to Eye co ordination is so important - ive said it before - if the 121 was on a flight deck the plane would be upside down in a field someplace!! it would be like having the artificial horizon upside down and the stick back to front! its a real shame cos it is a good and reliable machine but i too cannot use the eq cos it drives me mad.... i mean why not have the frequency decrease when you turn the knob clockwise too - that would just be the icing on the crappy programming cake! come on steinberg! HOW MANY PROGRAMMING HOURS WOULD THIS TAKE ????? I RECKON ABOUT 10 FLIPPIN MINUTES. PATHETIC. And worse TOTALLY IGNORANT :evil: :shock: :cry:

User avatar
Elektrobolt
Senior Member
Posts: 1334
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Contact:

Re: Please, please, please update the CC121 driver

Post by Elektrobolt » Sun Jan 15, 2012 5:51 pm

I am with you, Bredo!
"Remember that we live only in the present, in this fleeting instant; all the rest of our life is either past and gone, or not yet revealed."

pwmspeed
New Member
Posts: 38
Joined: Tue Dec 28, 2010 1:44 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by pwmspeed » Mon Jan 23, 2012 1:09 pm

Bredo, i mixed on many big consoles - actually i never mix digitally. i personally have no preferrence if steinberg swaps the Q and G in cubase/nuendo or on the cc121. after all this time it just should be done. i am just very disappointed because the cc121 could be such a work horse. but i am hardy touching the eq knobs. i am simply not used to have hardly any driver updates. the maker of my soundcard is totally different there: personal feedback in emails, reported bugs fixed within the next release, questions answered via email even on sundays. thats what i call support.
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.

DrWashington
Junior Member
Posts: 69
Joined: Fri Feb 04, 2011 8:23 am
Contact:

Re: Please, please, please update the CC121 driver

Post by DrWashington » Tue Apr 24, 2012 12:45 am

Steinberg. Seriously. Dedicate some resources to this thing. It really could and ought to be more customizable. The acceleration issue, in particular, is what keeps me from using it more. It just doesn't feel right, no matter what I try. EQing things should feel natural and predictable. This doesn't. Please add some new, selectable acceleration curves. This would make all the difference in the world to me, and I think many others!

Oh, and please do allow an option to switch the knob functions, as outlined above. That'd really help!

Thanks,

DrW
Win10x64, Intel Core i7 5960x @ 4.2GHz, 32GB DDR 4, Asus Rampage V Extreme, Samsung 1TB SSD for OS + 6TB RAID 10 + 5TB RAID 1, BD-RE, GeForce 780 Ti (4 monitors), RME Fireface UC, EVE SC208s.

User avatar
Strophoid
Grand Senior Member
Posts: 4648
Joined: Sun Dec 26, 2010 2:56 pm
Location: The Netherlands
Contact:

Re: Please, please, please update the CC121 driver

Post by Strophoid » Tue Apr 24, 2012 2:37 pm

+1 on the acceleration, it's really off right now and I doubt it's all that hard to adjust???
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.

My humble contributions to what could be considered music.

User avatar
Marsman
Member
Posts: 273
Joined: Thu Dec 16, 2010 12:03 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Marsman » Thu May 31, 2012 1:03 pm

Strophoid wrote:Oh wow, that looks like a great effort.
Drool at this:
These enhancements go beyond the original functionality that the device provides under Cubase but I found them very handy when working with the CC121:

1. Pressing the mute and the monitor button at the same time will swap the functionality of the volume fader and the pan encoder so the fader will control the panorama of a channel and the encoder will control the volume. This will make the automation of pan data much easier.

2. Pressing the write and the VSTi button at the same time will disable and enable the motorfader. This is usefull in many recording and mixing situations where the sound of the moving fader is disturbing. This shortcut is much easier as plugging the wall wart in and out every time to shut up the fader.
Come on Steinberg, Reaper can now use the cc121 better than Cubase, fix that!
+1
I wonder if there ever will be a useful update for this device?
Please make it happen SB...
Nuendo 7 x64 + NEK, Windows 8.1 Professional x64
RME HDSP 9652, Dual Xeon 8-Core, Intel Chipset MB, Special Skills: Vanishing/Mind Manipulation

misnoma
Junior Member
Posts: 80
Joined: Sun Jan 02, 2011 11:00 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by misnoma » Sat Jul 14, 2012 8:52 pm

+1
Cubase Pro 10, Windows10. RME 9632.

Post Reply

Return to “Steinberg CC121”

Who is online

Users browsing this forum: No registered users and 1 guest