Page 2 of 4

Re: Please, please, please update the CC121 driver

Posted: Sun Jul 15, 2012 8:26 am
by Keres
I expect Steinberg now regards this (IMHO) under-exploited device as obsolescent.

I don't think we'll see any further development.

Re: Please, please, please update the CC121 driver

Posted: Mon Aug 06, 2012 7:16 pm
by sgodzillat
Please add some new, selectable acceleration curves. This would make all the difference in the world to me, and I think many others!
yeah i was looking for this issue around web because it's totally impossible to work with EQ in my opinion.
i use all buttons on cc121 except all the eq section i'm way faster with mouse because of this "acceleration" thing :roll:

Re: Please, please, please update the CC121 driver

Posted: Fri Aug 10, 2012 10:05 am
by sgodzillat
if you guys are concerned by this .. or want to support please join this group :
http://www.facebook.com/groups/419197208126264/

Re: Please, please, please update the CC121 driver

Posted: Mon Aug 20, 2012 10:08 am
by sgodzillat
thx for joining the facebook page guys but please leave also some comments here so the post goes UP :) and we get more people.

Re: Please, please, please update the CC121 driver

Posted: Wed Aug 29, 2012 7:42 pm
by Strophoid
Little bump on EQ acceleration tweak :)

Re: Please, please, please update the CC121 driver

Posted: Sat Sep 22, 2012 6:04 pm
by sgodzillat
ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.

Re: Please, please, please update the CC121 driver

Posted: Sun Sep 23, 2012 10:19 pm
by Strophoid
sgodzillat wrote:ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.
Not really. It's got some quirks but it's far from useless.

Re: Please, please, please update the CC121 driver

Posted: Tue Nov 13, 2012 3:38 pm
by Marsman
hello? any news on this?

Re: Please, please, please update the CC121 driver

Posted: Tue Nov 13, 2012 4:17 pm
by Benutzername
The last version with changes in functionality was 1.6 and that was released at the end of 2010 IIRC. So I wouldn't hold my breath.

Re: Please, please, please update the CC121 driver

Posted: Fri Dec 07, 2012 1:41 pm
by Benutzername
Now it really starts to get funny. The CC121 controls almost any EQ under REAPER but with the latest Cubase it can't even control the internal EQ.

At least Steinberg has announced a fix for this in a later version.

Re: Please, please, please update the CC121 driver

Posted: Tue Dec 18, 2012 11:17 pm
by Sunshy
Wow. I'm a huge fan of the 121 but I hope this gets sorted.

Re: Please, please, please update the CC121 driver

Posted: Sat Dec 29, 2012 10:19 am
by wooller2004
Definitely needs a new injection of life - I struggle a little with it and would like more unity in layout between the controller and the software

Re: Please, please, please update the CC121 driver

Posted: Thu Jan 03, 2013 7:43 pm
by edubasstobi
I too would like to request., the CC121 is frustrating to not be able to use it with cubase7.espero hurry up with this.

Re: Please, please, please update the CC121 driver

Posted: Sun Jan 13, 2013 7:27 pm
by Proteinshake
Please "unlock" the CC121 so other Hosts can use it. Don't tie that piece of fine Hardware to Cubase/Nuendo if you can't support it properly anyway. Thanks! :-)

Re: Please, please, please update the CC121 driver

Posted: Thu Jan 17, 2013 8:35 am
by Sunshy
Indeed, would love to have this work in other daws so I could switch back and forth easily. Darn those reaper guys! :evil:

Re: Please, please, please update the CC121 driver

Posted: Thu Jan 17, 2013 2:47 pm
by DigitalGeek
hello ,

i have read that cubase 7 does not support the CC121 controller yet

can you confirm this please ?

any alternative except the mackie control ? (similar size)

thx you very much

Re: Please, please, please update the CC121 driver

Posted: Thu Jan 17, 2013 5:34 pm
by DigitalGeek
thank you for the update Bredo m8

Re: Please, please, please update the CC121 driver

Posted: Fri Jan 18, 2013 9:51 pm
by Proteinshake
Yes Bredo, it shouldn't be too hard. Cubase/Nuendo sends either a certain SysEx- or Midi-Signal (don't remember it all anymore) to the CC121, like once a second or so. That's all I believe.

Re: Please, please, please update the CC121 driver

Posted: Tue Jan 22, 2013 6:50 pm
by aaroradz1
Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-

Re: Please, please, please update the CC121 driver

Posted: Tue Jan 22, 2013 8:11 pm
by HarrySound
aaroradz1 wrote:Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-
Same here, I got a feeling its coming very soon. could be a couple of weeks but I kinda need the Eq bits too.

Re: Please, please, please update the CC121 driver

Posted: Mon May 27, 2013 6:48 pm
by sheik yerbouti
+1

also it would be nice to be able to access left/right locator, instead start/end of the project

Re: Please, please, please update the CC121 driver

Posted: Sat Jun 01, 2013 3:42 am
by Sunshy
Bump. Love my CC121.

Re: Please, please, please update the CC121 driver

Posted: Tue Jun 25, 2013 10:36 am
by edubasstobi
although now works on c7, I do not work very well, the rotary is not accurate., would be ideal to release him and every holder of CC121 you program your way freely (bcr 200 beheringer style, etc). , but a shame that this forum is so neglected by steinberg.si happens, would be a bomb CC121

Re: Please, please, please update the CC121 driver

Posted: Sun Jan 19, 2014 12:33 am
by pwmspeed
God, still no update. FRUSTRATION!!!!!!!!

Re: Please, please, please update the CC121 driver

Posted: Sun Jan 19, 2014 12:54 am
by mozizo
i really don't understand why CC121 is not further improved, lot of users find it hard to work with efficiently.
its the Half baked situation again from steinberg/yamaha.
i think little effort from them and some creativity mind should make this controller much better !!

* channel select buttons to follow MC when in focus or even better by toggle with button combination to focus Project/MC tracks

*make the knobs resolution changeable for big sweeps.

*have more control options from cubase, like assign the function knob with 4 buttons to adjust tracks Gain HP/LP filters, or bypass CS,Inserts, sends of selected channel. (cant find right now an option on C7.5 to assign them to CC121 functions)

*option to turn off the Motorized fader (without pulling out the power cord)