Page 3 of 4

Re: Please, please, please update the CC121 driver

Posted: Wed Jan 29, 2014 10:09 pm
by Marsman
Hello Steinberg, how about making the drivers open source so a dedicated fan can implement a little bit of extra functionality?

Re: Please, please, please update the CC121 driver

Posted: Mon Mar 03, 2014 10:21 am
by pwmspeed
god... more than a year and still no driver update.... :evil:

Re: Please, please, please update the CC121 driver

Posted: Thu Mar 06, 2014 9:50 pm
by electrow
BUMP BUMP BUMP BUMP

OR

bUmP BuMp buMP BUmp

Re: Please, please, please update the CC121 driver

Posted: Wed Jun 11, 2014 5:55 am
by DrWashington
BUMP! WTF, Steinberg! Come on, please respond!

Re: Please, please, please update the CC121 driver

Posted: Wed Aug 20, 2014 1:46 pm
by pwmspeed
12746 views and 53 replies (ok. I did a few of them) and STILL NO ANSWER from Steinberg. Crazy. I guess posting in this forum is a waste of time.

Re: Please, please, please update the CC121 driver

Posted: Wed Aug 20, 2014 2:06 pm
by folkfreak
I did not expect anything else...

Re: Please, please, please update the CC121 driver

Posted: Wed Aug 20, 2014 2:41 pm
by Benutzername
I don't think there has been one single reply from an official in this forum section ever (apart from ads/announcements). So don't expect an answer.

Re: Please, please, please update the CC121 driver

Posted: Mon Sep 15, 2014 6:32 pm
by r4r
update!!!!!!!!!!!!!!!!!!update!!!!!!!!!!!!!!!!!!!!!update!!!!!!!!!!!!!!!!!!!!

please update the eq!!!!!!!!!!

Re: Please, please, please update the CC121 driver

Posted: Sun Sep 21, 2014 9:10 am
by Yannick
+1

Best regards
Yannick

Re: Please, please, please update the CC121 driver

Posted: Sun Sep 21, 2014 9:56 am
by pazpatu
+1

Re: Please, please, please update the CC121 driver

Posted: Sat Oct 11, 2014 10:45 am
by Yannick
Any official news from Steinberg guys ?

( three years later :D )

Best regards
Yannick

Re: Please, please, please update the CC121 driver

Posted: Sun Oct 19, 2014 5:19 pm
by cubace
pwmspeed wrote:After a long long time without update for the CC121 (altough many here want it) ---- any clues if there will ever be an update for the controller? Its bascially an option to flip the Q and the G knob so that they finally (after years) match the software. And how about that requested more analog (or evern custom) scaleing feel of the frequency knob.

If i was a programmer i would really do it on my own. i actually already asked around. the Q and G knob flip is prolly a 5 minute programming job. i can't understand why Steinberg does not care about the CC121 users.

.... btw: i have NEVER really used the EQ sections since they are so ... ehm.. un-analog to use. and the Q and G flip is just a nightmare!
It does not help to be a programmer. The source and spec are closed. With a good software the yamaha hardware would have been very good. Steinberg has probably nothing to do about it. It is a Japanise gear. You get what you buy. If you need new functions you buy new gear, thats the japanise way.

Re: Please, please, please update the CC121 driver

Posted: Sun Oct 19, 2014 5:41 pm
by Benutzername
The hardware is not the problem. The CC121 is just a very simple MIDI-controller. The buttons send note on/off, the fader pitch bend values and the encoders CCs. That's it. This works as expected so there is no need to update something here.

The mapping in the software is the problem. It would be pretty easy to optionally swap two CCs to reflect the eq's screen layout or to scale the CC values to customize encoder speed. The REAPER extension shows how simple this is (including source code).

AFAIK Steinberg and not Yamaha is responsible for the glue between the controller and Cubendo (aka 'CC121 tools'). So in theory there is hope for an updated version but I wouldn't hold my breath.

Re: Please, please, please update the CC121 driver

Posted: Mon Jan 11, 2016 6:39 pm
by pwmspeed
Posted 11/2011. Still no reply. No update. Nothing. It is VERY frustrating.

Re: Please, please, please update the CC121 driver

Posted: Mon Feb 08, 2016 5:36 am
by alexis
I came to the forum to see if this was worth looking at ... didn't read all the pages, but I guess it is not what I want to use with C8.5?

Re: Please, please, please update the CC121 driver

Posted: Sat Apr 07, 2018 1:10 pm
by Yannick
Bump !

Still using my Frontier Alphatrack (and they have gone out of buisness !)

Repards
Yannick

Re: Please, please, please update the CC121 driver

Posted: Fri Apr 20, 2018 5:45 am
by DrWashington
Bump... c'mon mods, wtf? Talk to us!

Re: Please, please, please update the CC121 driver

Posted: Thu Oct 18, 2018 8:07 pm
by nodoubtyall
+1

Re: Please, please, please update the CC121 driver

Posted: Thu Nov 15, 2018 9:25 am
by PaulDred
Uh huh

Please upgrade the driver

Re: Please, please, please update the CC121 driver

Posted: Fri Nov 16, 2018 12:09 pm
by sinnerman7777777
agreed!!!!! please ! Thank u steinberg! mine isn't working after new 9.5.41 update

Re: Please, please, please update the CC121 driver

Posted: Sat Nov 24, 2018 1:45 am
by garymusic
Does the CC121 work with Cubase 10? I just ordered the controller as there isn't much out there in the way of controllers for Cubase. The FaderPort doesn't seem to work for all of the buttons.

Re: Please, please, please update the CC121 driver

Posted: Sat Jan 12, 2019 2:54 am
by McBass
Ah what the heck? Bump! What is with Steinberg and abandonware? Or maybe what I should ask is what is up with me in sticking with them? LOL

Re: Please, please, please update the CC121 driver

Posted: Thu Jan 17, 2019 5:28 pm
by shanabit
McBass wrote:
Sat Jan 12, 2019 2:54 am
Or maybe what I should ask is what is up with me in sticking with them? LOL
That is the question. As for me, no more Steinberg hardware

Re: Please, please, please update the CC121 driver

Posted: Sun Feb 03, 2019 3:48 am
by SF_Green
garymusic wrote:
Sat Nov 24, 2018 1:45 am
Does the CC121 work with Cubase 10? I just ordered the controller as there isn't much out there in the way of controllers for Cubase. The FaderPort doesn't seem to work for all of the buttons.
Using it with Cubase 10 here on Win 7 x64. No issues so far.

Re: Please, please, please update the CC121 driver

Posted: Mon Feb 25, 2019 4:05 am
by garymusic
SF_Green wrote:
Sun Feb 03, 2019 3:48 am
garymusic wrote:
Sat Nov 24, 2018 1:45 am
Does the CC121 work with Cubase 10? I just ordered the controller as there isn't much out there in the way of controllers for Cubase. The FaderPort doesn't seem to work for all of the buttons.
Using it with Cubase 10 here on Win 7 x64. No issues so far.
I am now using just my Yamaha 01V96 remote layer with Cubase. I stopped using FaderPort because it seemed that you coudn't use both at the same time.