All about Steinberg's Advanced Integration DSP Studio MR816 CSX and MR816 X.
1 post • Page 1 of 1
- New Member
- Posts: 27
- Joined: Thu Dec 16, 2010 1:08 pm
Would appreciate some advice. I'm sending a signal out from an insert return (send?) on an external mic pre to Channel 2 in on the MR816. I'm using a TRS to XLR cable. For the purposes of mobile recording I'd rather not have a half pulled TS cable dangling out of the insert hole in the external mic pre, so I'm using the TRS plugged all the way in and connecting to MR816 Channel 2 via XLR. Sounds like I'm getting a good signal but......is this wired ok?
Windows 10 / Cubase 9 / Wavelab 8.5 / Intel I7 950 / GB-X58A-UD3R / 16 gig DDR3 ram / Radeon HD 4350 PCIe / 3 X SATA HDD / MR816 CSX / Focusrite Liquid Mix 32 / Liquid Mix dedicated pci firewire card / Seasonic S12 650W
Users browsing this forum: No registered users and 1 guest