MR816X used with RME HDSP 9652 and TotalMix

beatpete · November 25, 2011, 4:08pm

Norbury Brook:

beatpete:

Jynks:

Do you have idea as to why my mics are still sending input signal when their line is turned completely down on the MR817X hardware input and in MR editor?

Probably due to incorect mapping in the MR Editor (make sure MR Extensions is un-installed)

Also any idea on how to get the MR816X to sync from the RME?

There is an external sync option in the MR Editor. I use my Main MR816 as the master clock and the Digiface and 2nd MR816 are syncing via adat.

Thanks so much!

Jynks

You have to connect them separately to access the discrete clocking menu, you will however come across the problem I’ve just found doing this, and that is that the 816’s wont follow the master clock rate, they have to be reconnected and changed manually from the MR editor.

MC

This could very well be, I haven’t change sample rate from 44.1 in years.