then one day to another I can't use my MR816 any more,
the leds (WCLK; 96K; 88K; 48K; 44K; INTERNAL; ADAT; SPDIF) are flashing like a christmas tree
On Troubleshooting, on the manual says:
DAW:■ Word Clock Source lamps and Sample Rate lamps ﬂash in order.
Settings on the MR816 CSX/MR816 X and connections
· When the lamps ﬂash, the MR816 CSX/MR816 X may not be
recognized by the connected computer. Turn off then on of the power of the corresponding MR816 CSX/MR816 X, or disconnect the IEEE1394 cable from the MR816 CSX/MR816 X then connect again.
- Win7 Pro x64
Nuendo 5.5.4 x64 and x32
CPU, I7 3930K 3.20GHz 12MB
MB, GIGABYTE X79-UD5
PS, SEASONIC X-SERIES 1050W
GC, PNY NVIDIA QUADRO NVS 420 PCIE X16 512MB
RAM, 1600MHZ 64GB
TI FW interface, DAWICONTROL DC-FW800 PCI-E
(I have the DC FW interface on legacy)
connected to MR816CSX by "pro snake" FireWire Cable, 6-pin connection with 10m length
I disconnected the IEEE1394 cable, then connected cable again;
I uninstalled the TOOLS_for_MR_V172_Win64 and restart the PC and installed again;
the Yamaha Steinberg FW Driver shows everything blank.
I'm on this, all day long..
Every thing here is powered by UPS, an APC Smart-UPS 3000VA LCD 230V...
Please, any ideas?