Factory Reset for the MR816

All about Steinberg's Advanced Integration DSP Studio MR816 CSX and MR816 X.
Post Reply
shanabit
Member
Posts: 911
Joined: Thu Dec 16, 2010 5:50 pm
Contact:

Factory Reset for the MR816

Post by shanabit » Mon Jan 19, 2015 2:07 am

1. Turn off the device
2. Hold the PAD button and press the rotary 1 knob. While holding those buttons, turn the device on.
3. When the lights flash the reset is complete.

OR as others have done

1. Turn off the device
2. While keeping the pad button and rotary knob 1 pressed, turn on the device
3. Wait for the LEDs stops flashing and 3 LEDs light up around the rotary knobs
4. Still holding the pad button and rotary knob 1 pressed, press the rotary knob 2 and wait till the LEDs stop flashing.

Any corrections please post and I will edit this
Last edited by shanabit on Thu Oct 22, 2015 5:32 pm, edited 2 times in total.
Non-participating in perpetuity. Enjoy your forum

rimash
New Member
Posts: 7
Joined: Tue Jan 06, 2015 3:16 pm
Contact:

Re: Factory Reset for the MR816

Post by rimash » Mon Sep 07, 2015 6:54 am

how long does it take?how do u know its been reset correctly?

WaterElephant
New Member
Posts: 2
Joined: Mon May 22, 2017 6:43 pm
Contact:

Re: Factory Reset for the MR816

Post by WaterElephant » Mon May 22, 2017 6:47 pm

Ive done this, but this does not factory reset. It's still changing sample rates

chikitin
Member
Posts: 558
Joined: Mon May 16, 2016 3:15 am
Contact:

Re: Factory Reset for the MR816

Post by chikitin » Thu Jun 08, 2017 1:33 pm

shanabit wrote:1. Turn off the device
...
Does this downgrade the updated firmware? I need to make sure before I do this please.

Thank you.
Laptop: iMac, 16GB RAM SSD 2TB, Cubase Pro 10.0.40 on Mojave, the latest w/ two external Monitors
NI Komplete 5, EWQLSO,HSO
Synths: Yamaha PSR-A3000, Roland Fantom XR
Interface: Steinberg MR-816CSX
Effects: Rocktron DSP, Lexicon MPX 550
Controller: Steinberg CC121, Yamaha KX25,49,88, Korg Nano Kontrol, Boss RC 300, Yamaha MFC 10

shanabit
Member
Posts: 911
Joined: Thu Dec 16, 2010 5:50 pm
Contact:

Re: Factory Reset for the MR816

Post by shanabit » Thu Jun 08, 2017 5:46 pm

chikitin wrote:
shanabit wrote:1. Turn off the device
...
Does this downgrade the updated firmware? I need to make sure before I do this please.

Thank you.

IF you installed the firmware update PROPERLY, you can turn your unit off and on with no issues. No it does not mess with the firmware version, it only resets the unit to factory setup and does not mess with the firmware when you simply re-set the unit.

*Firmware is a whole different thing. Its like your OS on a computer. Re-setting the factory settings is like resetting the input and output names, volume levels etc
Non-participating in perpetuity. Enjoy your forum

chikitin
Member
Posts: 558
Joined: Mon May 16, 2016 3:15 am
Contact:

Re: Factory Reset for the MR816

Post by chikitin » Thu Jun 08, 2017 8:01 pm

Thank you very much for the clarification.
Laptop: iMac, 16GB RAM SSD 2TB, Cubase Pro 10.0.40 on Mojave, the latest w/ two external Monitors
NI Komplete 5, EWQLSO,HSO
Synths: Yamaha PSR-A3000, Roland Fantom XR
Interface: Steinberg MR-816CSX
Effects: Rocktron DSP, Lexicon MPX 550
Controller: Steinberg CC121, Yamaha KX25,49,88, Korg Nano Kontrol, Boss RC 300, Yamaha MFC 10

Post Reply

Return to “Steinberg MR816”

Who is online

Users browsing this forum: No registered users and 5 guests