Wavelab 7 - Cannot open Wave Device

All topics on WaveLab 7 and WaveLab Elements 7
Post Reply
chosen
New Member
Posts: 4
Joined: Wed Oct 03, 2018 11:39 am
Contact:

Wavelab 7 - Cannot open Wave Device

Post by chosen » Wed Oct 24, 2018 2:28 am

Hi Again!

Hope everyone is well...

Using Wavelab 7 in MAC High Sierra 10.13 and a iConnectivity iConnect Audio4+ soundcard...

Unable to record and a pop up message appears...
Screen Shot 2018-10-24 at 11.29.27 am.png
(94.01 KiB) Not downloaded yet
Hope someone can help...

Thanks...

bob99
Senior Member
Posts: 2259
Joined: Fri Jan 07, 2011 2:49 am
Contact:

Re: Wavelab 7 - Cannot open Wave Device

Post by bob99 » Thu Oct 25, 2018 6:40 pm

chosen wrote:
Wed Oct 24, 2018 2:28 am
Hi Again!

Hope everyone is well...

Using Wavelab 7 in MAC High Sierra 10.13 and a iConnectivity iConnect Audio4+ soundcard...

Unable to record and a pop up message appears...

Screen Shot 2018-10-24 at 11.29.27 am.png

Hope someone can help...
Thanks...
I've seen that error message asked a lot here, but no universal solution except to disconnect the interface and restart computer, open Wavelab and play through internal, then re-connect interface and restart computer, switch back to the external interface in Options Audio Streaming Settings, and toggle settings in the interface control panel for internal/auto clock and sample rate settings, and file format sample rate in the Record Window. And update to the latest iConnect interface software and/or firmware.

But it would probably be a good idea to disconnect the interface and try to record with the computer built in microphone or line-in first to see if that works (even with no input) without the error message. I don't think High Sierra is fully supported in even Wavelab 9 yet, but getting it to record with the computer built-in audio would probably be a good sign for the Wavelab 7.

edit: sorry I guess it is 10.14 not fully supported on Wavelab 9 yet.

chosen
New Member
Posts: 4
Joined: Wed Oct 03, 2018 11:39 am
Contact:

Re: Wavelab 7 - Cannot open Wave Device

Post by chosen » Fri Oct 26, 2018 5:58 pm

Hi bob99,

Thank you for your lengthy response!

Greatly appreciated!

Downloaded the Wavelab Elements 9.5 demo and everything is working fine...

The recording levels are all in the green and fluctuating...

My iConnectivity iConnect Audio4+ inputs work fine in Cubase 8.5 and Ableton 10 also...

Post Reply

Return to “WaveLab 7 | WaveLab Elements 7”

Who is online

Users browsing this forum: No registered users and 1 guest