Please, please, please update the CC121 driver
- Keres
- Junior Member
- Posts: 119
- Joined: Fri Dec 17, 2010 7:55 am
- Contact:
Re: Please, please, please update the CC121 driver
I expect Steinberg now regards this (IMHO) under-exploited device as obsolescent.
I don't think we'll see any further development.
I don't think we'll see any further development.
C6.0.7/ CC121/ XP 32 SP2/ 2xDelta 1010
-
- Junior Member
- Posts: 176
- Joined: Thu Mar 24, 2011 12:13 am
- Contact:
Re: Please, please, please update the CC121 driver
yeah i was looking for this issue around web because it's totally impossible to work with EQ in my opinion.Please add some new, selectable acceleration curves. This would make all the difference in the world to me, and I think many others!
i use all buttons on cc121 except all the eq section i'm way faster with mouse because of this "acceleration" thing

-
- Junior Member
- Posts: 176
- Joined: Thu Mar 24, 2011 12:13 am
- Contact:
Re: Please, please, please update the CC121 driver
if you guys are concerned by this .. or want to support please join this group :
http://www.facebook.com/groups/419197208126264/
http://www.facebook.com/groups/419197208126264/
-
- Junior Member
- Posts: 176
- Joined: Thu Mar 24, 2011 12:13 am
- Contact:
Re: Please, please, please update the CC121 driver
thx for joining the facebook page guys but please leave also some comments here so the post goes UP
and we get more people.

- Strophoid
- Grand Senior Member
- Posts: 4648
- Joined: Sun Dec 26, 2010 2:56 pm
- Location: The Netherlands
- Contact:
Re: Please, please, please update the CC121 driver
Little bump on EQ acceleration tweak 

Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.
My humble contributions to what could be considered music.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.
My humble contributions to what could be considered music.
-
- Junior Member
- Posts: 176
- Joined: Thu Mar 24, 2011 12:13 am
- Contact:
Re: Please, please, please update the CC121 driver
ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.
- Strophoid
- Grand Senior Member
- Posts: 4648
- Joined: Sun Dec 26, 2010 2:56 pm
- Location: The Netherlands
- Contact:
Re: Please, please, please update the CC121 driver
Not really. It's got some quirks but it's far from useless.sgodzillat wrote:ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.
My humble contributions to what could be considered music.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.
My humble contributions to what could be considered music.
- Marsman
- Member
- Posts: 271
- Joined: Thu Dec 16, 2010 12:03 am
- Contact:
Re: Please, please, please update the CC121 driver
hello? any news on this?
Nuendo 7 x64 + NEK, Windows 8.1 Professional x64
RME HDSP 9652, Dual Xeon 8-Core, Intel Chipset MB, Special Skills: Vanishing/Mind Manipulation
RME HDSP 9652, Dual Xeon 8-Core, Intel Chipset MB, Special Skills: Vanishing/Mind Manipulation
- Benutzername
- Junior Member
- Posts: 119
- Joined: Sun Jan 02, 2011 1:54 pm
- Contact:
Re: Please, please, please update the CC121 driver
The last version with changes in functionality was 1.6 and that was released at the end of 2010 IIRC. So I wouldn't hold my breath.
- Benutzername
- Junior Member
- Posts: 119
- Joined: Sun Jan 02, 2011 1:54 pm
- Contact:
Re: Please, please, please update the CC121 driver
Now it really starts to get funny. The CC121 controls almost any EQ under REAPER but with the latest Cubase it can't even control the internal EQ.
At least Steinberg has announced a fix for this in a later version.
At least Steinberg has announced a fix for this in a later version.
- Sunshy
- Member
- Posts: 749
- Joined: Wed Dec 15, 2010 6:08 pm
- Contact:
Re: Please, please, please update the CC121 driver
Wow. I'm a huge fan of the 121 but I hope this gets sorted.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
-
- New Member
- Posts: 5
- Joined: Tue Feb 08, 2011 3:23 am
- Contact:
Re: Please, please, please update the CC121 driver
Definitely needs a new injection of life - I struggle a little with it and would like more unity in layout between the controller and the software
We all Float Down Here
-
- New Member
- Posts: 5
- Joined: Sat Dec 22, 2012 11:17 pm
- Contact:
Re: Please, please, please update the CC121 driver
I too would like to request., the CC121 is frustrating to not be able to use it with cubase7.espero hurry up with this.
inicio de cubase
-
- New Member
- Posts: 4
- Joined: Sun Aug 28, 2011 6:39 am
- Contact:
Re: Please, please, please update the CC121 driver
Please "unlock" the CC121 so other Hosts can use it. Don't tie that piece of fine Hardware to Cubase/Nuendo if you can't support it properly anyway. Thanks! 

Cubase 6.5.1 / OS X 10.7.4
- Sunshy
- Member
- Posts: 749
- Joined: Wed Dec 15, 2010 6:08 pm
- Contact:
Re: Please, please, please update the CC121 driver
Indeed, would love to have this work in other daws so I could switch back and forth easily. Darn those reaper guys! 

N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
-
- New Member
- Posts: 19
- Joined: Tue Jan 01, 2013 9:46 pm
- Contact:
Re: Please, please, please update the CC121 driver
hello ,
i have read that cubase 7 does not support the CC121 controller yet
can you confirm this please ?
any alternative except the mackie control ? (similar size)
thx you very much
i have read that cubase 7 does not support the CC121 controller yet
can you confirm this please ?
any alternative except the mackie control ? (similar size)
thx you very much
-
- New Member
- Posts: 19
- Joined: Tue Jan 01, 2013 9:46 pm
- Contact:
Re: Please, please, please update the CC121 driver
thank you for the update Bredo m8
-
- New Member
- Posts: 4
- Joined: Sun Aug 28, 2011 6:39 am
- Contact:
Re: Please, please, please update the CC121 driver
Yes Bredo, it shouldn't be too hard. Cubase/Nuendo sends either a certain SysEx- or Midi-Signal (don't remember it all anymore) to the CC121, like once a second or so. That's all I believe.
Cubase 6.5.1 / OS X 10.7.4
-
- New Member
- Posts: 10
- Joined: Sun May 01, 2011 11:32 pm
- Contact:
Re: Please, please, please update the CC121 driver
Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-
Intel i7 990x, 24g Ram, Windows 7 Pro 64 bit, Cubase 9, Halion 6, WaveLab7, Yamaha Vintage Collection, 2 x Steinberg MR816 CSX, Steinberg CC121, MOTU Midi Express 128, Akai APC40, Akai MPC 2500, Yamaha V50, Yamaha MG20XU, Roland SH-32, Axiom61
- HarrySound
- Member
- Posts: 258
- Joined: Sun Apr 29, 2012 6:17 pm
- Contact:
Re: Please, please, please update the CC121 driver
Same here, I got a feeling its coming very soon. could be a couple of weeks but I kinda need the Eq bits too.aaroradz1 wrote:Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-
-
- New Member
- Posts: 31
- Joined: Mon Jul 11, 2011 12:19 pm
- Contact:
Re: Please, please, please update the CC121 driver
+1
also it would be nice to be able to access left/right locator, instead start/end of the project
also it would be nice to be able to access left/right locator, instead start/end of the project
cubase 5.0.0 2.3ghz intel i7 16gb ram macosx 10.6
- Sunshy
- Member
- Posts: 749
- Joined: Wed Dec 15, 2010 6:08 pm
- Contact:
Re: Please, please, please update the CC121 driver
Bump. Love my CC121.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro
-
- New Member
- Posts: 5
- Joined: Sat Dec 22, 2012 11:17 pm
- Contact:
Re: Please, please, please update the CC121 driver
although now works on c7, I do not work very well, the rotary is not accurate., would be ideal to release him and every holder of CC121 you program your way freely (bcr 200 beheringer style, etc). , but a shame that this forum is so neglected by steinberg.si happens, would be a bomb CC121
inicio de cubase
-
- New Member
- Posts: 38
- Joined: Tue Dec 28, 2010 1:44 pm
- Contact:
Re: Please, please, please update the CC121 driver
God, still no update. FRUSTRATION!!!!!!!!
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.
- mozizo
- Senior Member
- Posts: 1679
- Joined: Fri Jan 28, 2011 10:48 pm
- Contact:
Re: Please, please, please update the CC121 driver
i really don't understand why CC121 is not further improved, lot of users find it hard to work with efficiently.
its the Half baked situation again from steinberg/yamaha.
i think little effort from them and some creativity mind should make this controller much better !!
* channel select buttons to follow MC when in focus or even better by toggle with button combination to focus Project/MC tracks
*make the knobs resolution changeable for big sweeps.
*have more control options from cubase, like assign the function knob with 4 buttons to adjust tracks Gain HP/LP filters, or bypass CS,Inserts, sends of selected channel. (cant find right now an option on C7.5 to assign them to CC121 functions)
*option to turn off the Motorized fader (without pulling out the power cord)
its the Half baked situation again from steinberg/yamaha.
i think little effort from them and some creativity mind should make this controller much better !!
* channel select buttons to follow MC when in focus or even better by toggle with button combination to focus Project/MC tracks
*make the knobs resolution changeable for big sweeps.
*have more control options from cubase, like assign the function knob with 4 buttons to adjust tracks Gain HP/LP filters, or bypass CS,Inserts, sends of selected channel. (cant find right now an option on C7.5 to assign them to CC121 functions)
*option to turn off the Motorized fader (without pulling out the power cord)
cubase Pro 9.5 64bit ,halion 6 GA4 HS2,HSO,Dark planet,neosoul keys.
Sony vaioF13 i7 CPU win10 redstone 64bit 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro
Sony vaioF13 i7 CPU win10 redstone 64bit 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro
Who is online
Users browsing this forum: No registered users and 0 guests