Please, please, please update the CC121 driver

All about Steinberg's Advanced Integration Controller CC121.
User avatar
Keres
Junior Member
Posts: 119
Joined: Fri Dec 17, 2010 7:55 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Keres » Sun Jul 15, 2012 8:26 am

I expect Steinberg now regards this (IMHO) under-exploited device as obsolescent.

I don't think we'll see any further development.
C6.0.7/ CC121/ XP 32 SP2/ 2xDelta 1010

sgodzillat
Junior Member
Posts: 176
Joined: Thu Mar 24, 2011 12:13 am
Contact:

Re: Please, please, please update the CC121 driver

Post by sgodzillat » Mon Aug 06, 2012 7:16 pm

Please add some new, selectable acceleration curves. This would make all the difference in the world to me, and I think many others!
yeah i was looking for this issue around web because it's totally impossible to work with EQ in my opinion.
i use all buttons on cc121 except all the eq section i'm way faster with mouse because of this "acceleration" thing :roll:

sgodzillat
Junior Member
Posts: 176
Joined: Thu Mar 24, 2011 12:13 am
Contact:

Re: Please, please, please update the CC121 driver

Post by sgodzillat » Fri Aug 10, 2012 10:05 am

if you guys are concerned by this .. or want to support please join this group :
http://www.facebook.com/groups/419197208126264/

sgodzillat
Junior Member
Posts: 176
Joined: Thu Mar 24, 2011 12:13 am
Contact:

Re: Please, please, please update the CC121 driver

Post by sgodzillat » Mon Aug 20, 2012 10:08 am

thx for joining the facebook page guys but please leave also some comments here so the post goes UP :) and we get more people.

User avatar
Strophoid
Grand Senior Member
Posts: 4648
Joined: Sun Dec 26, 2010 2:56 pm
Location: The Netherlands
Contact:

Re: Please, please, please update the CC121 driver

Post by Strophoid » Wed Aug 29, 2012 7:42 pm

Little bump on EQ acceleration tweak :)
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.

My humble contributions to what could be considered music.

sgodzillat
Junior Member
Posts: 176
Joined: Thu Mar 24, 2011 12:13 am
Contact:

Re: Please, please, please update the CC121 driver

Post by sgodzillat » Sat Sep 22, 2012 6:04 pm

ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.

User avatar
Strophoid
Grand Senior Member
Posts: 4648
Joined: Sun Dec 26, 2010 2:56 pm
Location: The Netherlands
Contact:

Re: Please, please, please update the CC121 driver

Post by Strophoid » Sun Sep 23, 2012 10:19 pm

sgodzillat wrote:ok .. problem solved. i mean problem sold ! i go ipad now forget the cc121 it's useless.
Not really. It's got some quirks but it's far from useless.
Software: Steinberg Cubase Pro 8 64-bit.
Hardware: Intel i5 6600, 16Gb DDR3, Win7 64-bit
Mackie Onyx 1620i - Steinberg Midex 8 - Steinberg CC121.

My humble contributions to what could be considered music.

User avatar
Marsman
Member
Posts: 271
Joined: Thu Dec 16, 2010 12:03 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Marsman » Tue Nov 13, 2012 3:38 pm

hello? any news on this?
Nuendo 7 x64 + NEK, Windows 8.1 Professional x64
RME HDSP 9652, Dual Xeon 8-Core, Intel Chipset MB, Special Skills: Vanishing/Mind Manipulation

User avatar
Benutzername
Junior Member
Posts: 119
Joined: Sun Jan 02, 2011 1:54 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Benutzername » Tue Nov 13, 2012 4:17 pm

The last version with changes in functionality was 1.6 and that was released at the end of 2010 IIRC. So I wouldn't hold my breath.

User avatar
Benutzername
Junior Member
Posts: 119
Joined: Sun Jan 02, 2011 1:54 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Benutzername » Fri Dec 07, 2012 1:41 pm

Now it really starts to get funny. The CC121 controls almost any EQ under REAPER but with the latest Cubase it can't even control the internal EQ.

At least Steinberg has announced a fix for this in a later version.

User avatar
Sunshy
Member
Posts: 752
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Tue Dec 18, 2012 11:17 pm

Wow. I'm a huge fan of the 121 but I hope this gets sorted.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

wooller2004
New Member
Posts: 5
Joined: Tue Feb 08, 2011 3:23 am
Contact:

Re: Please, please, please update the CC121 driver

Post by wooller2004 » Sat Dec 29, 2012 10:19 am

Definitely needs a new injection of life - I struggle a little with it and would like more unity in layout between the controller and the software
We all Float Down Here

edubasstobi
New Member
Posts: 5
Joined: Sat Dec 22, 2012 11:17 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by edubasstobi » Thu Jan 03, 2013 7:43 pm

I too would like to request., the CC121 is frustrating to not be able to use it with cubase7.espero hurry up with this.
inicio de cubase

Proteinshake
New Member
Posts: 4
Joined: Sun Aug 28, 2011 6:39 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Proteinshake » Sun Jan 13, 2013 7:27 pm

Please "unlock" the CC121 so other Hosts can use it. Don't tie that piece of fine Hardware to Cubase/Nuendo if you can't support it properly anyway. Thanks! :-)
Cubase 6.5.1 / OS X 10.7.4

User avatar
Sunshy
Member
Posts: 752
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Thu Jan 17, 2013 8:35 am

Indeed, would love to have this work in other daws so I could switch back and forth easily. Darn those reaper guys! :evil:
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

DigitalGeek
New Member
Posts: 19
Joined: Tue Jan 01, 2013 9:46 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by DigitalGeek » Thu Jan 17, 2013 2:47 pm

hello ,

i have read that cubase 7 does not support the CC121 controller yet

can you confirm this please ?

any alternative except the mackie control ? (similar size)

thx you very much

DigitalGeek
New Member
Posts: 19
Joined: Tue Jan 01, 2013 9:46 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by DigitalGeek » Thu Jan 17, 2013 5:34 pm

thank you for the update Bredo m8

Proteinshake
New Member
Posts: 4
Joined: Sun Aug 28, 2011 6:39 am
Contact:

Re: Please, please, please update the CC121 driver

Post by Proteinshake » Fri Jan 18, 2013 9:51 pm

Yes Bredo, it shouldn't be too hard. Cubase/Nuendo sends either a certain SysEx- or Midi-Signal (don't remember it all anymore) to the CC121, like once a second or so. That's all I believe.
Cubase 6.5.1 / OS X 10.7.4

aaroradz1
New Member
Posts: 10
Joined: Sun May 01, 2011 11:32 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by aaroradz1 » Tue Jan 22, 2013 6:50 pm

Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-
Intel i7 990x, 24g Ram, Windows 7 Pro 64 bit, Cubase 9, Halion 6, WaveLab7, Yamaha Vintage Collection, 2 x Steinberg MR816 CSX, Steinberg CC121, MOTU Midi Express 128, Akai APC40, Akai MPC 2500, Yamaha V50, Yamaha MG20XU, Roland SH-32, Axiom61

User avatar
HarrySound
Member
Posts: 258
Joined: Sun Apr 29, 2012 6:17 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by HarrySound » Tue Jan 22, 2013 8:11 pm

aaroradz1 wrote:Steinberg really needs to drop that "Tools for CC121" update sometime soon.. My EQ workflow got wacked since the C7 update.. Need my controller at full functionality! -please-
Same here, I got a feeling its coming very soon. could be a couple of weeks but I kinda need the Eq bits too.

sheik yerbouti
New Member
Posts: 31
Joined: Mon Jul 11, 2011 12:19 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by sheik yerbouti » Mon May 27, 2013 6:48 pm

+1

also it would be nice to be able to access left/right locator, instead start/end of the project
cubase 5.0.0 2.3ghz intel i7 16gb ram macosx 10.6

User avatar
Sunshy
Member
Posts: 752
Joined: Wed Dec 15, 2010 6:08 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by Sunshy » Sat Jun 01, 2013 3:42 am

Bump. Love my CC121.
N 8.3 Cubase 10
Intel Core I7-3930K Sandy Bridge 3.8, 64 GB Corsair RAM, Itel 330 Series SSD Drive for OS, Win 10 Pro 64 bit
RME UFX, UR28M, CC 121, Blackmagic Intensity Pro

edubasstobi
New Member
Posts: 5
Joined: Sat Dec 22, 2012 11:17 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by edubasstobi » Tue Jun 25, 2013 10:36 am

although now works on c7, I do not work very well, the rotary is not accurate., would be ideal to release him and every holder of CC121 you program your way freely (bcr 200 beheringer style, etc). , but a shame that this forum is so neglected by steinberg.si happens, would be a bomb CC121
inicio de cubase

pwmspeed
New Member
Posts: 38
Joined: Tue Dec 28, 2010 1:44 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by pwmspeed » Sun Jan 19, 2014 12:33 am

God, still no update. FRUSTRATION!!!!!!!!
Cubase 7.5 with CC121, Studer 962 Mixer, API 8200 Summing Modules, Lavry+RME converters, Various outboard including Urei, API, Lexicon, Audio & Design, Telefunken.

User avatar
mozizo
Senior Member
Posts: 1680
Joined: Fri Jan 28, 2011 10:48 pm
Contact:

Re: Please, please, please update the CC121 driver

Post by mozizo » Sun Jan 19, 2014 12:54 am

i really don't understand why CC121 is not further improved, lot of users find it hard to work with efficiently.
its the Half baked situation again from steinberg/yamaha.
i think little effort from them and some creativity mind should make this controller much better !!

* channel select buttons to follow MC when in focus or even better by toggle with button combination to focus Project/MC tracks

*make the knobs resolution changeable for big sweeps.

*have more control options from cubase, like assign the function knob with 4 buttons to adjust tracks Gain HP/LP filters, or bypass CS,Inserts, sends of selected channel. (cant find right now an option on C7.5 to assign them to CC121 functions)

*option to turn off the Motorized fader (without pulling out the power cord)
cubase Pro 9.5 64bit ,halion 6 GA4 HS2,HSO,Dark planet,neosoul keys.
Sony vaioF13 i7 CPU win10 redstone 64bit 8gb
Steinberg MR816csx ,MR816x ,UR44 ,CC121
Motif es6-Kawai Mp4-Korg PA4X-MOXF8
cubasis,cubase ic pro

Post Reply

Return to “Steinberg CC121”

Who is online

Users browsing this forum: No registered users and 1 guest