Are you actually using the WiFi capability of the motherboard?
The WiFi software stack can interfere with DAW operations.
I would suggest using only a wired Ethernet connection, as they tend to require a lot less overhead.
If you must use WiFi with your DAW:
- Buy a WiFi bridge, which is essentially an external WiFi client, with Ethernet wired connection(s).
- Totally remove the WiFi card and drivers.
___ If you can’t remove the WiFi hardware, ensure it is disabled in Device Manager, and then remove the drivers. - Connect your DAW to the WiFi bridge with an Ethernet cable.
- Setup the WiFi bridge for your WiFi network.