reverence problem please help

Post general topics related to Cubase Pro 8, Cubase Artist 8 and Cubase Elements 8 here.
Post Reply
warmia
New Member
Posts: 2
Joined: Tue Dec 01, 2015 4:02 pm
Contact:

reverence problem please help

Post by warmia » Wed Feb 10, 2016 1:58 pm

Hello everyone, Im new to this forum (...and any forum), so please dont slug me off for any errors i post.

the problem I have:
I can't fire up reverence. I assume it supposed to be under ''Reverbs'' section in inserts but there's only RoomWorks reverb. I re-installed reverence, cubase and nothing. cant be found. While reinstalling it was the message that it is installed corectly and it looks all fine. well, I have no idea where it is. Any help will be highly appretiated
Thanks

User avatar
DaveAbbott
Member
Posts: 628
Joined: Sun Feb 06, 2011 7:51 am
Location: Johannesburg, South Africa
Contact:

Re: reverence problem please help

Post by DaveAbbott » Wed Feb 10, 2016 8:40 pm

Hi There

You need to give us a little info, what version of Cubase you have, what OS you are using, computer specs etc, then someone will have an idea or two re your problem.

Best Regards

Dave
Dave Abbott
Entertainer | Musician | Producer
cricket@iafrica.com

Computer i7 3 Ghz CPU, Intel Mobo, DX58SO, 12Gig DDR1600 RAM, System Drive 64 Gig SSD + 480 Gig SSD sample drive + 3 x 1TB recording and sample drives.
Software: Windows 10 Pro 64Bit, Cubase 10 Pro, Wavelab 9.5, NI Komplete Ultimate, UAD, Waves, and various other plugs
Interface: Steinberg UR824 with Focusrite ISA One, Focusrite Octopre, Cubase Elements 8.5 with Focusrite 18i8 on spare machine. Cubase Elements 9.5 with Focusrite 18i8 on Stage Laptop (Dell 6430 i7 with 8gig RAM)
Korg Taktile 49 Controller Steinberg CC121 Controller

Rule 1: Have Fun! Rule 2: It's Not Serious! Rule 3: When in doubt refer to Rule 1!!

Modest-Expert
Junior Member
Posts: 87
Joined: Sat Jan 30, 2016 3:59 pm
Contact:

Re: reverence problem please help

Post by Modest-Expert » Thu Feb 11, 2016 1:35 am

Did it worked well in the past? Then you could try a restore poin with Windows. Thats what I do when a big problem occurs I restore the computer to a previous restore point where everything was perfect

User avatar
raino
Grand Senior Member
Posts: 3744
Joined: Tue Dec 21, 2010 2:41 am
Location: San Francisco
Contact:

Re: reverence problem please help

Post by raino » Fri Feb 12, 2016 9:19 pm

Welcome to the forum. In general we're a friendly & helpful bunch (unless someone acts like a jerk). And Dave is right about posting your specs - it really helps folks understand what might be going on if that info is in your signature.

Open the Plug-in Manager and see if Reverence is shown there. If it is then you probably are using a Collection that isn't displaying Reverence. You can just drag it into the collection to make it visible. If this turns out to be the cause, you should probably read the Plug-in Manager section of the manual so you're up to speed on it.
rodger

Cubase Pro 10.0.40, Win10 Home, Halion6, BFD3, GPO, Komplete Ultimate 9, Waves Gold, Misc. other

i7 4771 Haswell Processor 3.5GHz, ADK LGA1150, 16GB RAM, GeForce GTX970, RME Fireface 400, 2x UAD-2

PeppaPig
Member
Posts: 914
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: reverence problem please help

Post by PeppaPig » Fri Feb 12, 2016 10:36 pm

Reverence is only available in Cubase PRO.
Cubase Pro 10.00.40, 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Adam T5V, Golden Audio pre73 DLX, Behringer ADA8200, Joe Meek AC3, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 860 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22, Behringer Mic2200 used for reamping with a bit of nastiness!

warmia
New Member
Posts: 2
Joined: Tue Dec 01, 2015 4:02 pm
Contact:

Re: reverence problem please help

Post by warmia » Mon Feb 29, 2016 9:51 pm

Thanks for replys.
I use Cubase 8 LE AI Elements. Win 7. Plugin MAnager doesn't show reverence.

User avatar
Grim
Grand Senior Member
Posts: 5064
Joined: Thu Jan 06, 2011 5:08 pm
Contact:

Re: reverence problem please help

Post by Grim » Tue Mar 01, 2016 11:13 am

warmia wrote:Thanks for replys.
I use Cubase 8 LE AI Elements. Win 7. Plugin MAnager doesn't show reverence.
PeppaPig wrote:Reverence is only available in Cubase PRO.
i7 5820k @3.7Ghz, 16Gb, W10Pro, Cubase 9.0x, Cubase 8.5.x, Audient iD22, Zoom UAC-2, Wavelab Elements 9.x, Nektar Impact GX61

Deven
New Member
Posts: 6
Joined: Thu Mar 03, 2016 9:04 pm
Contact:

Re: reverence problem please help

Post by Deven » Thu Mar 03, 2016 9:08 pm

Grim wrote:
warmia wrote:Thanks for replys.
I use Cubase 8 LE AI Elements. Win 7. Plugin MAnager doesn't show reverence.
PeppaPig wrote:Reverence is only available in Cubase PRO.
I have Elements 8, came with the package, says it's installed but not seen in the plugin manager?

pupidarko
New Member
Posts: 4
Joined: Fri Feb 22, 2019 8:57 pm
Contact:

reverence problem - can't hear any reverb

Post by pupidarko » Mon Jul 08, 2019 5:01 am

Hi, I have Cubase 9.5 PRO. When I open REVerence from inserts or in FX channel I do not hear any reverb. Not from on my keyboard or from the recorded instrument piano track. In the window, i can browse any type of reverb (hall, room etc.) and there is a nice pic with it but I do not hear any changes. On the U Tube video, they do the same and the reverb starts immediately.
This is the first time I am using it with Emotional piano VST.
Everything else works perfectly in Cubase. Is there some setup with my ASIO card?

Thank you!

airflamesred
Member
Posts: 247
Joined: Tue Dec 24, 2013 2:25 pm
Location: London
Contact:

Re: reverence problem please help

Post by airflamesred » Tue Jul 09, 2019 6:52 pm

I suspect this is a routing problem.
Koby drums, Triggera Krigg, Bix, megadrum, Kontakt. samples from All and Sundry.

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 18 guests