5.5-best wishes for the future...

For users of legacy Steinberg Cubase software
Post Reply
Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

5.5-best wishes for the future...

Post by Yany »

Hi...

We arrive already at the end of the year .. and version 5.5 of Cubase is still very problematic. In a few months it will inevitably version 6. It will obviously pay a minimum $ 300 for power upgrade ... is nice! .. no? 8-)
I use cubase for 10 years now (VST 5) even though many pro advise me long to change software. For me it was the heart speaking and I wanted to use Cubase because I thought (then) it was very stable and clear. It was not the Protool sound but it worked for me .... and then we arrived at the version C5.5.... :shock:
This version (meant as an important update) was released around June 2010 (so it has been seven months).

So...there is on Steinberg's forum (C&N) and others too...Several posts (many actually) on the MAJOR BUG startup reading (little lag at start of audio playback).
It's been seven months that I can not use C5.5 because of this BUG ... yeeeeaaaahh!
As I said above ... in a few months (April-May) there will probably version 6 ..!?
I have version 5 from June 2009 (which included a lot of default, but it was normal because of the importance of the update) ... so 6 more months for that everything works more or less.
This means that for a year and a half ... I could use cubase correctly for only 6 months.. :? (one year of problem!)
And of course in 3 months the major problem I mentioned above will be solved... but it will serve nothing more because the version 6 will be there. For $ 300 ... mouhahaha ..!!!

Cubase then my Love ... I'm leaving! :cry:
I found a new Software a lot more good than you ... and his name is ... PT9! :lol: :lol: :lol:

Thank you anyway for these ten years of happiness and suffering ... and best wishes for the future ...

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

I have no lag at startup.

Are you talking about plain audio files?

If so then maybe the RIFF headers are corrupted or non-standard.

gravehill
Junior Member
Posts: 108
Joined: Thu Dec 16, 2010 2:52 am
Contact:

Re: 5.5-best wishes for the future...

Post by gravehill »

No startup lag here either. Are you sure the problem isn't in your system?
i9 9900k, 32 GB RAM, AsRock Taichi Ultimate MoBo, Focusrite Saffire 24 DSP with Win10 64 bit and Cubase 10. http://www.chaosresearch.net

Ian s
Member
Posts: 318
Joined: Thu Dec 16, 2010 2:09 am
Contact:

Re: 5.5-best wishes for the future...

Post by Ian s »

Yany wrote:Hi...

We arrive already at the end of the year .. and version 5.5 of Cubase is still very problematic. In a few months it will inevitably version 6. It will obviously pay a minimum $ 300 for power upgrade ... is nice! .. no? 8-)
I use cubase for 10 years now (VST 5) even though many pro advise me long to change software. For me it was the heart speaking and I wanted to use Cubase because I thought (then) it was very stable and clear. It was not the Protool sound but it worked for me .... and then we arrived at the version C5.5.... :shock:
This version (meant as an important update) was released around June 2010 (so it has been seven months).

So...there is on Steinberg's forum (C&N) and others too...Several posts (many actually) on the MAJOR BUG startup reading (little lag at start of audio playback).
It's been seven months that I can not use C5.5 because of this BUG ... yeeeeaaaahh!
As I said above ... in a few months (April-May) there will probably version 6 ..!?
I have version 5 from June 2009 (which included a lot of default, but it was normal because of the importance of the update) ... so 6 more months for that everything works more or less.
This means that for a year and a half ... I could use cubase correctly for only 6 months.. :? (one year of problem!)
And of course in 3 months the major problem I mentioned above will be solved... but it will serve nothing more because the version 6 will be there. For $ 300 ... mouhahaha ..!!!

Cubase then my Love ... I'm leaving! :cry:
I found a new Software a lot more good than you ... and his name is ... PT9! :lol: :lol: :lol:

Thank you anyway for these ten years of happiness and suffering ... and best wishes for the future ...
No lag here either. Maybe your Cubase is just pausing for dramatic effect, so you can be histrionic ;)
C10.5 Pro | W10 | MR 816CSX, 3x MR 816X | CC121| ES-175D | ES-345

NYC Composer
Member
Posts: 386
Joined: Wed Dec 15, 2010 11:08 pm
Contact:

Re: 5.5-best wishes for the future...

Post by NYC Composer »

As the song says, breaking up is hard to do. The ways of love are mysterious.
Regards, L.J.

_______________________________________________________

Cubase 10.5.12, 2019 iMac i9 8 core@3.6khz, OS 10.14.6, 72 GB RAM, scads of SSDs, Babyface Pro, OWC 4 bay Thunderbolt 3 enclosure, too many sample libraries, 90s American Series Strat, Taylor and Martin acoustics, Mexican Fender Precision.

User avatar
Keres
Junior Member
Posts: 119
Joined: Fri Dec 17, 2010 7:55 am
Contact:

Re: 5.5-best wishes for the future...

Post by Keres »

Hi Yany -

Did you ever think of starting your song at bar 2 or 3 to see if the problem resolves itself?
C6.0.7/ CC121/ XP 32 SP2/ 2xDelta 1010

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »

NYC Composer wrote:As the song says, breaking up is hard to do. The ways of love are mysterious.
Exactly mate ... like the song says .. do not look back and go on. :mrgreen:



And for others ...!

No offense but, In my opinion...maybe in a few years ... you will understand what we are talking about ... ;)

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

So now we have not only "mac biggots" but forum software gurus and now PT Elites.

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »

face.saver wrote:So now we have not only "mac biggots" but forum software gurus and now PT Elites.
excuse me I have not noticed your post ... the other was not directed to you ...

Perhaps you're right ... I'm not terrible in terms of programming ... so ..! :oops:

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

Yany since you are still here.

Did you look into RIFF/AIFF?

Broadcast wave files and 32 bit float can often be troublesome on windows.

So which system are you using?

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »

face.saver wrote:Yany since you are still here.

Did you look into RIFF/AIFF?

Broadcast wave files and 32 bit float can often be troublesome on windows.

So which system are you using?

Not get tired ... the bug is known and recognized by Steinberg for several months ... it will be resolved in the next maintenance update for users Nuendo...for Cubase?? The problems is not a 32-bit float, or something like that .. it deeper (something with some interfaces drivers) ..and i'm on mac...so thank you anyway :D
Last edited by Yany on Sat Jan 01, 2011 1:32 pm, edited 1 time in total.

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

Bug report?

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »


User avatar
JMCecil
Grand Senior Member
Posts: 3621
Joined: Wed Dec 15, 2010 5:03 pm
Contact:

Re: 5.5-best wishes for the future...

Post by JMCecil »

face.saver wrote:Broadcast wave files and 32 bit float can often be troublesome on windows.
Complete and Total FUD
cpu:i7 6950x - RAM:128gb - OS:Win 10 - Interfaces:Lynx Aurora, Komplete Audio 6 - MIDI:Midisport 4x4, Quadra Thru
Steiny Suff: CMC:FD,CH,TP,QC,PD | Wavelab 9 | Cubase VST-32->9 | H5, GA4, HSO, Padshop Pro, Cubasis, iC Pro

Discoworx
Member
Posts: 345
Joined: Sat Jan 01, 2011 9:41 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Discoworx »

JMCecil wrote:
face.saver wrote:Broadcast wave files and 32 bit float can often be troublesome on windows.
Complete and Total FUD

Class! :D
I7 3770 3.4 Ghz LGA1155 - GigaByte Z77X-DH3 Rev 1 M/B - 16Gb Kingston Hyper X 1600Mhz - 128Gb OCZ Vertex SSD x 4 - GTX660 2Gb GFX - Silentium Brutus 410 - Thermaltake Smart 630

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

32 bit float files don't play by default on windows.

RF64 does not work on windows.

Cheers

User avatar
JMCecil
Grand Senior Member
Posts: 3621
Joined: Wed Dec 15, 2010 5:03 pm
Contact:

Re: 5.5-best wishes for the future...

Post by JMCecil »

face.saver wrote:32 bit float files don't play by default on windows.
RF64 does not work on windows.
Cheers
Completely different statement than the one you made before. And their are codecs available for both and are no trouble to use at all. Plus, in Cubase they are supported and no trouble.
cpu:i7 6950x - RAM:128gb - OS:Win 10 - Interfaces:Lynx Aurora, Komplete Audio 6 - MIDI:Midisport 4x4, Quadra Thru
Steiny Suff: CMC:FD,CH,TP,QC,PD | Wavelab 9 | Cubase VST-32->9 | H5, GA4, HSO, Padshop Pro, Cubasis, iC Pro

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

No one in the bug thread said who was using what and yet almost all demand a fix.

Where is the "real" bug report?

cubace
Senior Member
Posts: 1025
Joined: Sat Jan 01, 2011 6:41 pm
Contact:

Re: 5.5-best wishes for the future...

Post by cubace »

They will complete the migration from VST5 and port the chord tracks to Cubase 6. 64-bit OSX and fix the mess with remote controllers.

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »

face.saver wrote:No one in the bug thread said who was using what and yet almost all demand a fix.

Where is the "real" bug report?

dude ...Instead of saying stupid things... you would not go elsewhere? .. if we are there ..? :roll:

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

Are they public now?

Yany
New Member
Posts: 7
Joined: Wed Dec 15, 2010 9:29 pm
Contact:

Re: 5.5-best wishes for the future...

Post by Yany »

Yany wrote:
I found a new Software a lot more good than you ... and his name is ... PT9! :lol: :lol: :lol:



To all the guys who use cubase without problems ...

I apologize for that stupid phrase ... it's because of the *knuf* end of year festivities .. it makes me mad ... so no rancors ... I had fun anyway with this good old cubase... ;)

Goodbye

Guest

Re: 5.5-best wishes for the future...

Post by Guest »

Enjoy the PT "sound".

GiPe
New Member
Posts: 20
Joined: Sat Dec 25, 2010 10:11 am
Contact:

Re: 5.5-best wishes for the future...

Post by GiPe »

For Mac

Enable multicore and optimizing for nehalem and westmere mac pros!

same project in 2 different mac pros and the old 3,1 mac pro performs better then 2009 mac pro nehalem!

Very nice! (tired from this frustrating situation)
iMac Pro 2017, 64 GB RAM,3x pcie Uad via TB
OSX release 10.13.6
Midi: USB Motu Midiexpress 128 + USB Miditimepiece + some analog synths, outboards fx and analog drum machines, some bunch of digital craps synths and fx.
Audiocard: RME Fireface 802 connected via USB+Zed R16 via Firewire to Mac with full adatto in/out with my RME.
DAW: Cubase 10.5 pro, Reason 11 suite, Renoise 3
Controller: iCON Qcon ProX

Post Reply

Return to “Older Cubase versions”

Who is online

Users browsing this forum: Google [Bot] and 3 guests