[Bug] - volume doesn't respond to fader straight away

All about Steinberg's Advanced Integration Controller CC121.
Post Reply
User avatar
Posts: 325
Joined: Sun Dec 19, 2010 8:20 pm

[Bug] - volume doesn't respond to fader straight away

Post by jorisdeman » Wed May 30, 2018 11:56 am

I'm getting close to ditching my CC121.
It works fairly well, though one of its main features (the AI knob) I use a lot less than I thought I would.

But mainly, there appears to be a bug with the fader.
On instrument channels, I often use the fader to make small volume changes to balance them...a db up or down here and there.

I've noticed that the volume value doesn't always catch straight away when the value is at 0.0..I need to move it for a certain amount of time before it 'catches'...this is without any automation or read/write enabled.
Seems to be a bug, and I've never, ever had this issue when I used Eucon/Euphonix Artist...

Anyone else experience this?
Nuendo 10, Mac Os Mojave / Windows 10 | iMac Pro 8 core | X-keys |PT Control | VSLE Pro | UAD Apollo Quad via Thunderbolt | Dual Xeon & i7 Hexacore Slave PC's | G-tech G-Raid drives


User avatar
Junior Member
Posts: 139
Joined: Sat Dec 27, 2014 5:41 am

Re: [Bug] - volume doesn't respond to fader straight away

Post by keyzs » Fri Jun 01, 2018 3:55 pm

Hi, could this be a sensitivity issue? If so do reset the physical sensitivity setting using the instruction on pg23 of the operations manual.

personally mine is set to 6.

hope this helps.
intel i7-3770, Gigabyte Z77, AMD HD6970, Kingstons 32GB, Win7 x64, UR-44, CC-121, Cubase Pro 8.0.40 (Build 623) x64


Post Reply

Return to “Steinberg CC121”

Who is online

Users browsing this forum: No registered users and 0 guests