Inspector and lower zone: show output routing option!

All feature requests and suggestions for upcoming releases of Cubase Pro 9, Cubase Artist 9 and Cubase Elements 9 can be posted here.
Post Reply
anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Inspector and lower zone: show output routing option!

Post by anticipation » Sun Sep 09, 2018 1:39 pm

While working In a project that contains VST instruments and AUDIO channels its really hard to group and check the outputs. You have to open the big mixer. It can be very easy to manage it from the lower zone's mixer.

ALSO !!!!

Why we can't see VST instruments output routing in the left inspector !!! This is so much time consuming !!!

Please put that small change in the update ≤:≥

User avatar
greggybud
Senior Member
Posts: 1174
Joined: Thu Dec 16, 2010 10:01 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by greggybud » Mon Sep 10, 2018 12:58 am

anticipation wrote:
Sun Sep 09, 2018 1:39 pm
While working In a project that contains VST instruments and AUDIO channels its really hard to group and check the outputs. You have to open the big mixer. It can be very easy to manage it from the lower zone's mixer.

ALSO !!!!

Why we can't see VST instruments output routing in the left inspector !!! This is so much time consuming !!!

Please put that small change in the update ≤:≥
What is wrong or missing using the channel settings window?

When you click on any track in either the mix console or the project page, the channel settings window follows. If channel settings information were to be included in the inspector, a lot of what is included in channel settings would have to be eliminated.
Windows 7x64, Wavelab 9.5, latest Cubase version, i7, 16g, SSD, (Gigabyte GeForce GTX 750ti driving 2 32" LG ultra wides and 1 28" all @2560x1080) iCon QconPro, Metagrid, 4 MidiTimePiece's = 32in/outs, 4 TB HDs, UAD-2, NI, Waves, Arturia, and lots of hardware synthesizers most of them controlled by MidiQuest 11.

anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by anticipation » Wed Sep 12, 2018 5:45 pm

So I can tell what is wrong...

We have regions in the working field. Sometimes we don't want to open the mixer window and loose eye contact with our midi and audio regions. And want to route some of them to any output. How can you manage this witout opening the big mixer ? No you can't.
At least this option must be in the lower zone mixer... (Like logic..)

No you don't have to loose anything... It can be custom, so you don't use it but I can if I want... This is SOFTWARE...

User avatar
greggybud
Senior Member
Posts: 1174
Joined: Thu Dec 16, 2010 10:01 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by greggybud » Wed Sep 12, 2018 11:10 pm

anticipation wrote:
Wed Sep 12, 2018 5:45 pm
We have regions in the working field. Sometimes we don't want to open the mixer window and loose eye contact with our midi and audio regions. And want to route some of them to any output.
Forgive me if I don't understand your objective. I'm not sure what you mean by "regions in the working field." Are you referring to the Cubase Project page?
anticipation wrote:
Wed Sep 12, 2018 5:45 pm
How can you manage this witout opening the big mixer ? No you can't.
Actually you can. You do not necessarily need to open any mix consoles to open the Channel Settings box. Select a track in the project page. Click on the "e" that opens channel settings. Now click on any other track in the project page, and channel settings follows whatever track you clicked on. For routing click on the "targets" in the channel settings window.

(if the "e" isn't showing up on...for example an instrument track, then that means you have not set up your "track control settings" to reflect the "e" showing up in a track.)

EDIT: Now that I'm thinking about this, I know the instrument track has the option for the "e" but not sure if a midi track has that option?
anticipation wrote:
Wed Sep 12, 2018 5:45 pm
At least this option must be in the lower zone mixer... (Like logic..)
The "E" is also available in the lower zone. I may be misunderstanding your objective?

cubase 101.jpg
(694.37 KiB) Not downloaded yet
Windows 7x64, Wavelab 9.5, latest Cubase version, i7, 16g, SSD, (Gigabyte GeForce GTX 750ti driving 2 32" LG ultra wides and 1 28" all @2560x1080) iCon QconPro, Metagrid, 4 MidiTimePiece's = 32in/outs, 4 TB HDs, UAD-2, NI, Waves, Arturia, and lots of hardware synthesizers most of them controlled by MidiQuest 11.

anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by anticipation » Tue Sep 25, 2018 11:15 am

No, you did't get my point...
Just try this, open your lower zone mixer and route more then one track's output to another bus with ALT+SHIFT... like we do in the default big mixer.

User avatar
Winter Rat
Member
Posts: 691
Joined: Thu Jan 06, 2011 3:10 pm
Contact:

Re: Inspector and lower zone: show output routing option!

Post by Winter Rat » Tue Sep 25, 2018 12:32 pm

anticipation wrote:
Tue Sep 25, 2018 11:15 am
No, you did't get my point...
Just try this, open your lower zone mixer and route more then one track's output to another bus with ALT+SHIFT... like we do in the default big mixer.
You can do it right in the project window. Just select all tracks you want ALT+SHIFT and choose the bus you want in the Track Inspector, thats it. This is for Audio tracks.
For VSTi you can open Channel Settings window, then select all VSTi's you want, go to Output in the upper section ALT+SHIFT and choos the bus you need - all your selected instruments will be assigned to that bus.

Or you can use MixConsole #2 or #3 for this purpose - just make certain settings to see routing only, make it as small as lower zone Mixer, put it over it and open when you need.
Cubase 9.5
Win 8.1 or Win 10 Pro; Intel Core i7-8700K; Gigabyte GA-Z370 HD3P; 16 GB, 3000 MHz; GeForce GTX 1050.

anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by anticipation » Sat Feb 02, 2019 9:31 pm

So Im saying in a project which has audio and vsti tracks mixed. And just route them all easily just one click! Ok Got it???

jditmer0
New Member
Posts: 49
Joined: Sun Jun 26, 2011 12:31 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by jditmer0 » Sat May 18, 2019 7:53 am

The "e", or channel settings window doesn't even show the output of the tracks anymore since this update... If you have sends activated then the output just shows as "2 targets" if you have one send and one direct output track or it shows "3 targets" if you have 2 sends and one direct output track. How useless. This really needs to show the direct OUTPUT NAME at all times, never not the number of targets because the number of targets is useless information. I can't figure out why they would waste time changing this
-john

jditmer0
New Member
Posts: 49
Joined: Sun Jun 26, 2011 12:31 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by jditmer0 » Sat May 18, 2019 12:09 pm

anticipation FYI you can see it in the inspector under the direct routing tab. You just have to click the settings or gear icon at the bottom portion of the inspector window and then you can choose to show direct routing in the inspector
-john

anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by anticipation » Mon Jun 10, 2019 8:04 am

No no no... I guess still you didn't get my point. Lets route the selected tracks to an output without leaving this view...
Image


anticipation
New Member
Posts: 26
Joined: Sun Sep 22, 2013 1:59 am
Contact:

Re: Inspector and lower zone: show output routing option!

Post by anticipation » Tue Aug 13, 2019 2:33 pm

BUMP !!!

Post Reply

Return to “Feature Requests and Suggestions”

Who is online

Users browsing this forum: No registered users and 2 guests