Mackie Hui for Pro Tools only?

Post general topics related to Nuendo 8 here.
Post Reply
Aldersyde
Member
Posts: 332
Joined: Sat Sep 14, 2013 2:27 pm
Contact:

Mackie Hui for Pro Tools only?

Post by Aldersyde »

I'm looking for a control surface for Nuendo and have been told about the HUI technology.

There are several used surfaces on Ebay that are affordable but they all say "Pro Tools" and/ or "Avid".

Does this mean that these surfaces would be incompatible with Nuendo?

Are all HUI hardware is incompatible with Nuendo?

Dog and Pony
Member
Posts: 447
Joined: Wed Dec 15, 2010 7:33 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Dog and Pony »

Under "Studio Setup" there is an option to add a Mackie HUI controller so I imagine it will still work. That said, my understanding is that the Mackie Control protocol offers deeper integration than HUI.
5 systems with N8, N10, Nuage, Artist Series, Faderport 16, Windows 10, MacOSX 10.12 and many more toys.

Aldersyde
Member
Posts: 332
Joined: Sat Sep 14, 2013 2:27 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Aldersyde »

Dog and Pony wrote:
Thu Mar 28, 2019 7:03 pm
Under "Studio Setup" there is an option to add a Mackie HUI controller so I imagine it will still work. That said, my understanding is that the Mackie Control protocol offers deeper integration than HUI.
Thanks.

I thought they were the same protocol. I obviously have not done my homework.

Aldersyde
Member
Posts: 332
Joined: Sat Sep 14, 2013 2:27 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Aldersyde »

What I'm wondering is if there is a controller whose sliders will automatically mimic the channels I choose to show in my mixer.

Getalife2
Member
Posts: 677
Joined: Sat May 24, 2014 3:32 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Getalife2 »

Avid Artist Series does for sure.
N10.3 - i7 5960X/32 GB at 4 GHz Win 7 Pro 64bit - 2x RME MADI - 3X UAD-2 Quad

User avatar
fenderchris
Senior Member
Posts: 1499
Joined: Mon Dec 20, 2010 7:30 pm
Location: Planet Palmer
Contact:

Re: Mackie Hui for Pro Tools only?

Post by fenderchris »

Aldersyde wrote:
Thu Mar 28, 2019 8:51 pm
What I'm wondering is if there is a controller whose sliders will automatically mimic the channels I choose to show in my mixer.
A controller that does this extremely well is the SmartAV Tango. It follows the Visibility settings on the Nuendo MixConsole, or if the MixConsole and Project are being synced together, it will follow the Project visibility settings as well.

It also has a great Jog Wheel that can be set to perform many different functions at the touch of a button - completely configurable.

The Tango is no longer manufactured so they can currently be bought very cheaply. They are incredibly well built and infinitely customizable.
Chris

The Archers - give it a rest already!

OS: Windows-10 Pro 64-bit v.2004.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.

User avatar
HughH
Member
Posts: 595
Joined: Mon Jan 24, 2011 4:53 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by HughH »

Aldersyde wrote:
Thu Mar 28, 2019 8:51 pm
What I'm wondering is if there is a controller whose sliders will automatically mimic the channels I choose to show in my mixer.
Mackie Protocol does that.

I actually have a Behringer X-Touch AND an X-Touch Compact. Both work quite nicely, especially considering their price.

I use an actual Mackie MCU with 2 extenders in my studio. Love everything but the displays, which suck with my bad eyes. Behringer is much better in that regard (only).
The Compact I use in the studio as a Generic Remote for various commands and VSTi control.
The full X-Touch is for field work only.

But, yes, it follows visibility setting.
I didn't think EUCON (Avid Artist) did that. Seen many complaints around here. But perhaps that has changed as GetaLife2 says.

Hugh
Nuendo 10, Pro Tools Ultimate 2019
i7 5820 Asus x99 Deluxe 64 Gig Win 10 Home, Dual Monitors RME Digiface PCIe
Dell XPS 15 7590 Laptop i9 (10th Gen) 32 Gig Win 10 MOTU 8Pre-ES
i7 920 Asus P6T 12G Win 7 Slave Machine
MCU Pro plus 2 Extenders (24 Chn)
X-Touch Compact for various stuff
Blackmagic Decklink Studio w/27" Monitor
UR22

User avatar
Keyplayer
Senior Member
Posts: 1342
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Keyplayer »

fenderchris wrote:
Fri Mar 29, 2019 8:31 pm
Aldersyde wrote:
Thu Mar 28, 2019 8:51 pm
What I'm wondering is if there is a controller whose sliders will automatically mimic the channels I choose to show in my mixer.
A controller that does this extremely well is the SmartAV Tango. It follows the Visibility settings on the Nuendo MixConsole, or if the MixConsole and Project are being synced together, it will follow the Project visibility settings as well.

It also has a great Jog Wheel that can be set to perform many different functions at the touch of a button - completely configurable.

The Tango is no longer manufactured so they can currently be bought very cheaply. They are incredibly well built and infinitely customizable.
Where can they be bought? I've been trying to monitor the used market for them and I haven't found ANY! Can you name any sites ( ebay has nothing!)?
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i9 - 9900K CPU @ 3.60 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

User avatar
fenderchris
Senior Member
Posts: 1499
Joined: Mon Dec 20, 2010 7:30 pm
Location: Planet Palmer
Contact:

Re: Mackie Hui for Pro Tools only?

Post by fenderchris »

Keyplayer wrote:
Mon Apr 01, 2019 7:08 pm
fenderchris wrote:
Fri Mar 29, 2019 8:31 pm
Aldersyde wrote:
Thu Mar 28, 2019 8:51 pm
What I'm wondering is if there is a controller whose sliders will automatically mimic the channels I choose to show in my mixer.
A controller that does this extremely well is the SmartAV Tango. It follows the Visibility settings on the Nuendo MixConsole, or if the MixConsole and Project are being synced together, it will follow the Project visibility settings as well.

It also has a great Jog Wheel that can be set to perform many different functions at the touch of a button - completely configurable.

The Tango is no longer manufactured so they can currently be bought very cheaply. They are incredibly well built and infinitely customizable.
Where can they be bought? I've been trying to monitor the used market for them and I haven't found ANY! Can you name any sites ( ebay has nothing!)?
There is a Tango user group at tangousers@freelists.org that may be able to help you.

Tangos for sale occasionally show up there.
Chris

The Archers - give it a rest already!

OS: Windows-10 Pro 64-bit v.2004.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.

User avatar
fenderchris
Senior Member
Posts: 1499
Joined: Mon Dec 20, 2010 7:30 pm
Location: Planet Palmer
Contact:

Re: Mackie Hui for Pro Tools only?

Post by fenderchris »

Chris

The Archers - give it a rest already!

OS: Windows-10 Pro 64-bit v.2004.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.

User avatar
Keyplayer
Senior Member
Posts: 1342
Joined: Mon Jan 17, 2011 3:09 pm
Contact:

Re: Mackie Hui for Pro Tools only?

Post by Keyplayer »

fenderchris wrote:
Tue Apr 02, 2019 5:24 pm
There's a Tango-2 on eBay now.

https://m.ebay.co.uk/sch/i.html?_from=R ... rtav+tango

Cool! I sent you a PM.
Nuendo 1.0 - 10 |VST Studio Connect Pro | Windows 10 Pro | Intel i9 - 9900K CPU @ 3.60 | 64-bit OS | 32GB of RAM |RME HDSPe RayDAT | NVIDIA GeForce GTX 750 Ti Video Card | Euphonix MC Control, 2 Mix & Transport | Xkeys | iConnectivity mi10 MIDI Interface | UAD-2 Octo Core with UAD-1 Legacy Ultra Pak | Isotope RX4 | Melodyne 3.2 | Voxengo Plugins | Real Guitar | B4 II | EZ Drummer | Drumagog 4 | Virtual Guitarist 2 | Korg, Roland, Kurzweil Synths | Apogee Big Ben | 32 Channel Panasonic DA-7 desk | Equator D5 (5.1) & Mackie 824 (St.) monitors | VS-1680 & 880 HDR's |

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 0 guests