Insert slots of lower zone are too narrow on Cubase 9.5

Use this forum for an overview of issues and to report new ones.
Post Reply
Kamele
New Member
Posts: 1
Joined: Thu Nov 23, 2017 7:07 am
Contact:

Insert slots of lower zone are too narrow on Cubase 9.5

Post by Kamele » Thu Nov 23, 2017 7:36 am

Hello,

Inserts of lower zone are narrower than old version Cubase. It seems a GUI bug.
Especially, I can not edit inserted plugins when lower zone mixer is zoom out.
I attached its screenshots.
I hope to fix this bug.
Attachments
cu_insert2.jpg
(78.47 KiB) Not downloaded yet
cu_insert1.jpg
(53.72 KiB) Not downloaded yet

Fräulein Rührig
New Member
Posts: 22
Joined: Sat Jun 06, 2015 4:13 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Fräulein Rührig » Fri Nov 24, 2017 2:10 am

Same here.
Restarting Cubase, creating new empty project and opening afterwards your actual project helps for some time. But issue will appear again.

System: Win 10 Pro x64 (1703), Cubase 9.5 Pro, Geforce GTX970

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Wed Nov 29, 2017 11:01 pm

Hi,

How did you come to this, please? I cannot reproduce it here. Does Safe Start Mode solve it?
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

Janko Kezar
Junior Member
Posts: 181
Joined: Sun Oct 06, 2013 6:43 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Janko Kezar » Wed Nov 29, 2017 11:22 pm

Hey Martin

First focal point is that we have this glitch on windows version (at least 2 of us). As far as reproduction goes the glitch appears randomnly after I work in the arrangement and bring up the LZ mixer and the the insert area. After the glitch starts if you zoom out the mixer the smaller the insert boxes become.

If there is an option these posts could be merged into a single topic for better navigation
Cubase 9.5 64bit, HP elitebook 8470w, win 10

User avatar
jonwright
Junior Member
Posts: 164
Joined: Fri Apr 08, 2011 4:33 pm
Location: London
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by jonwright » Wed Dec 13, 2017 1:05 pm

Same issue here, on Mac OS. The inserts are narrow all the time in the Lower Zone.

The latest update (9.5.10) hasn't solved it.

jool
New Member
Posts: 13
Joined: Fri May 10, 2013 1:29 pm
Location: Bayonne France
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by jool » Wed Dec 13, 2017 9:54 pm

Same issue on Mac OSX
Cubase 9,5, Mac OSX High Sierra, Universal Audio Apollo 8

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Wed Dec 13, 2017 9:57 pm

Is it still an issue on Cubase 9.5.10, please?
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

User avatar
jonwright
Junior Member
Posts: 164
Joined: Fri Apr 08, 2011 4:33 pm
Location: London
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by jonwright » Thu Dec 14, 2017 7:10 am

Yes, as I mentioned above, the latest update hasn’t fixed it.

Fräulein Rührig
New Member
Posts: 22
Joined: Sat Jun 06, 2015 4:13 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Fräulein Rührig » Sun Jan 14, 2018 7:16 pm

I can confirm what jonwright said: Latest update 9.5.1 doesn't fix the issue.
@Steinberg: Please fix it.

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Sun Jan 14, 2018 8:35 pm

Fräulein Rührig wrote:
Sun Jan 14, 2018 7:16 pm
I can confirm what jonwright said: Latest update 9.5.1 doesn't fix the issue.
@Steinberg: Please fix it.
In the project where the issue occurred already, there is no fix. But it shouldn't happen in a new project created in Cubase 9.5.
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

Fräulein Rührig
New Member
Posts: 22
Joined: Sat Jun 06, 2015 4:13 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Fräulein Rührig » Sat Feb 03, 2018 6:12 pm

Martin.Jirsak wrote:
Sun Jan 14, 2018 8:35 pm
Fräulein Rührig wrote:
Sun Jan 14, 2018 7:16 pm
I can confirm what jonwright said: Latest update 9.5.1 doesn't fix the issue.
@Steinberg: Please fix it.
In the project where the issue occurred already, there is no fix. But it shouldn't happen in a new project created in Cubase 9.5.
Unfortunately it can happen also in a new project. It seems to be session-dependent. This means, if you open a project, where this issue appears, and create a new project without closing cubase, the new project shows the same behavior.
I hope this helps to fix it.

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Mon Feb 05, 2018 11:06 am

Hi,

In this case, Cubase is most probably using the last-used view, so it "copies" the wrong MixConsole settings to the new project.

If you open any corrupted project in C9.5.10, fix it by opening the MixConsole and Zoom In/Out Vertically. Then save the project, close and reopen. This should fix it on the project. After this, you shouldn't see the issue on the project anymore. And if you create any other project after this fix, the new project should be also OK.
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

User avatar
Jorge Ruiz
Junior Member
Posts: 113
Joined: Sun Dec 26, 2010 3:31 am
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Jorge Ruiz » Wed Feb 07, 2018 11:09 am

Same here. Does anybody know if this is also related to the Nvidia cards, like the weird inserts display bug in the Inspector?
PC i7 5960x 8 cores @ 4.2Ghz (Hyper-Threading off) | 16 GB RAM | MSI X99A SLI Plus | Nvidia GTX 1050 Ti 4 GB | RME HDSPe RayDAT | Focusrite Scarlett 18i20 3rd Gen. | Behringer ADA8200 | Steinberg CC121 | Windows 10 Pro 64 bits | Cubase Pro 10 | WaveLab Elements 9.5 | Komplete 12 | Waves | Soundtoys | Alesis QuadraSynth | Oberheim Matrix 1000 | IK UNO Synth | Korg TR-Rack | Alesis S4 Plus | Zoom 9010 | Roland GP-8

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Wed Feb 07, 2018 1:01 pm

Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

User avatar
Puli
New Member
Posts: 20
Joined: Sat Oct 24, 2015 12:16 am
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Puli » Wed Feb 07, 2018 4:12 pm

Reported this issue on Dec 17

viewtopic.php?f=253&t=128899

User avatar
Puli
New Member
Posts: 20
Joined: Sat Oct 24, 2015 12:16 am
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Puli » Tue Feb 13, 2018 12:57 am

Jorge Ruiz wrote:
Wed Feb 07, 2018 11:09 am
Same here. Does anybody know if this is also related to the Nvidia cards, like the weird inserts display bug in the Inspector?
It happens also with my laptop and ATI GPU.

User avatar
Puli
New Member
Posts: 20
Joined: Sat Oct 24, 2015 12:16 am
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Puli » Tue Feb 13, 2018 1:03 am

Martin.Jirsak wrote:
Mon Feb 05, 2018 11:06 am
Hi,

In this case, Cubase is most probably using the last-used view, so it "copies" the wrong MixConsole settings to the new project.

If you open any corrupted project in C9.5.10, fix it by opening the MixConsole and Zoom In/Out Vertically. Then save the project, close and reopen. This should fix it on the project. After this, you shouldn't see the issue on the project anymore. And if you create any other project after this fix, the new project should be also OK.
Nope it doesn't work that way, I mean it doesn't fix Zooming in/out Vertically in the MixConsole.

Fräulein Rührig
New Member
Posts: 22
Joined: Sat Jun 06, 2015 4:13 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Fräulein Rührig » Fri Mar 09, 2018 11:49 am

Update Cubase pro 9.5.2: Issue still exists.

Martin.Jirsak
Forum Elder
Posts: 17315
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Martin.Jirsak » Fri Mar 09, 2018 2:04 pm

This area has not been touched for C9.5.20. Last change was for C9.5.10, where it should be fixed. But it seems, there are still cases, where it is not fixed.

Make sure, you "reset" your Mix by Zoom In/Out, before you create a new project.
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

Romantique Tp
External Moderator
Posts: 2882
Joined: Fri Aug 07, 2015 3:25 pm
Contact:

Re: Insert slots of lower zone are too narrow on Cubase 9.5

Post by Romantique Tp » Fri Mar 09, 2018 3:39 pm

For anyone having this issue, check this post:
viewtopic.php?p=724394#p724394

It doesn't affect everyone so they'll need the cooperation of the people affected by it for this to be fixed, if these instructions don't fix it.
Every time someone says "it must be easy to add/fix", a programmer dies.

Cubase Pro and Wavelab Pro (latest), Windows 7 Ultimate 64-bit, MSI Z87-G45 GAMING, i5 4690k, GeForce GTX 760, almost every Steinberg plugin and expansion, Trilian, Komplete 10, etc etc etc etc

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest